Version bump

1 files changed, 0 insertions, 72 deletions

diff --git a/0006-net-aquantia-Regression-on-reset-with-1.x-firmware.patch b/0006-net-aquantia-Regression-on-reset-with-1.x-firmware.patch
deleted file mode 100644
index cc56065404e0..000000000000
--- a/0006-net-aquantia-Regression-on-reset-with-1.x-firmware.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 33feec41e6d35bbc679befe5ec0fb12acef18c95 Mon Sep 17 00:00:00 2001
-Message-Id: <33feec41e6d35bbc679befe5ec0fb12acef18c95.1523990130.git.jan.steffens@gmail.com>
-In-Reply-To: <3a7745f6fdd71aa34dae33c3edc586363d9ece9e.1523990130.git.jan.steffens@gmail.com>
-References: <3a7745f6fdd71aa34dae33c3edc586363d9ece9e.1523990130.git.jan.steffens@gmail.com>
-From: Igor Russkikh <igor.russkikh@aquantia.com>
-Date: Wed, 11 Apr 2018 15:23:24 +0300
-Subject: [PATCH 6/7] net: aquantia: Regression on reset with 1.x firmware
-
-On ASUS XG-C100C with 1.5.44 firmware a special mode called "dirty wake"
-is active. With this mode when motherboard gets powered (but no poweron
-happens yet), NIC automatically enables powersave link and watches
-for WOL packet.
-This normally allows to powerup the PC after AC power failures.
-
-Not all motherboards or bios settings gives power to PCI slots,
-so this mode is not enabled on all the hardware.
-
-4.16 linux driver introduced full hardware reset sequence
-This is required since before that we had no NIC hardware
-reset implemented and there were side effects of "not clean start".
-
-But this full reset is incompatible with "dirty wake" WOL feature
-it keeps the PHY link in a special mode forever. As a consequence,
-driver sees no link and no traffic.
-
-To fix this we forcibly change FW state to idle state before doing
-the full reset. This makes FW to restore link state.
-
-Fixes: c8c82eb net: aquantia: Introduce global AQC hardware reset sequence
-Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../aquantia/atlantic/hw_atl/hw_atl_utils.c      | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
-diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
-index d3b847ec7465..c58b2c227260 100644
---- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
-+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
-@@ -48,6 +48,8 @@
- #define FORCE_FLASHLESS 0
- 
- static int hw_atl_utils_ver_match(u32 ver_expected, u32 ver_actual);
-+static int hw_atl_utils_mpi_set_state(struct aq_hw_s *self,
-+				      enum hal_atl_utils_fw_state_e state);
- 
- int hw_atl_utils_initfw(struct aq_hw_s *self, const struct aq_fw_ops **fw_ops)
- {
-@@ -247,6 +249,20 @@ int hw_atl_utils_soft_reset(struct aq_hw_s *self)
- 
- 	self->rbl_enabled = (boot_exit_code != 0);
- 
-+	/* FW 1.x may bootup in an invalid POWER state (WOL feature).
-+	 * We should work around this by forcing its state back to DEINIT
-+	 */
-+	if (!hw_atl_utils_ver_match(HW_ATL_FW_VER_1X,
-+				    aq_hw_read_reg(self,
-+						   HW_ATL_MPI_FW_VERSION))) {
-+		int err = 0;
-+
-+		hw_atl_utils_mpi_set_state(self, MPI_DEINIT);
-+		AQ_HW_WAIT_FOR((aq_hw_read_reg(self, HW_ATL_MPI_STATE_ADR) &
-+			       HW_ATL_MPI_STATE_MSK) == MPI_DEINIT,
-+			       10, 1000U);
-+	}
-+
- 	if (self->rbl_enabled)
- 		return hw_atl_utils_soft_reset_rbl(self);
- 	else
--- 
-2.17.0
-