deleted: httpd.conf.zoneminder

1 files changed, 0 insertions, 540 deletions

diff --git a/httpd.conf.zoneminder b/httpd.conf.zoneminder
deleted file mode 100644
index a3ec3f32d965..000000000000
--- a/httpd.conf.zoneminder
+++ /dev/null
@@ -1,540 +0,0 @@
-#
-# This is the main Apache HTTP server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
-# In particular, see 
-# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
-# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
-# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
-# will be interpreted as '/logs/access_log'.
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# Do not add a slash at the end of the directory path.  If you point
-# ServerRoot at a non-local disk, be sure to specify a local disk on the
-# Mutex directive, if file-based mutexes are used.  If you wish to share the
-# same ServerRoot for multiple httpd daemons, you will need to change at
-# least PidFile.
-#
-ServerRoot "/etc/httpd"
-
-#
-# Mutex: Allows you to set the mutex mechanism and mutex file directory
-# for individual mutexes, or change the global defaults
-#
-# Uncomment and change the directory if mutexes are file-based and the default
-# mutex file directory is not on a local disk or is not appropriate for some
-# other reason.
-#
-# Mutex default:/run/httpd
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to 
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 80
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-LoadModule authn_file_module modules/mod_authn_file.so
-#LoadModule authn_dbm_module modules/mod_authn_dbm.so
-#LoadModule authn_anon_module modules/mod_authn_anon.so
-#LoadModule authn_dbd_module modules/mod_authn_dbd.so
-#LoadModule authn_socache_module modules/mod_authn_socache.so
-LoadModule authn_core_module modules/mod_authn_core.so
-LoadModule authz_host_module modules/mod_authz_host.so
-LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
-LoadModule authz_user_module modules/mod_authz_user.so
-#LoadModule authz_dbm_module modules/mod_authz_dbm.so
-#LoadModule authz_owner_module modules/mod_authz_owner.so
-#LoadModule authz_dbd_module modules/mod_authz_dbd.so
-LoadModule authz_core_module modules/mod_authz_core.so
-#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
-#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
-LoadModule access_compat_module modules/mod_access_compat.so
-LoadModule auth_basic_module modules/mod_auth_basic.so
-#LoadModule auth_form_module modules/mod_auth_form.so
-#LoadModule auth_digest_module modules/mod_auth_digest.so
-#LoadModule allowmethods_module modules/mod_allowmethods.so
-#LoadModule file_cache_module modules/mod_file_cache.so
-#LoadModule cache_module modules/mod_cache.so
-#LoadModule cache_disk_module modules/mod_cache_disk.so
-#LoadModule cache_socache_module modules/mod_cache_socache.so
-#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
-#LoadModule socache_dbm_module modules/mod_socache_dbm.so
-#LoadModule socache_memcache_module modules/mod_socache_memcache.so
-#LoadModule watchdog_module modules/mod_watchdog.so
-#LoadModule macro_module modules/mod_macro.so
-#LoadModule dbd_module modules/mod_dbd.so
-#LoadModule dumpio_module modules/mod_dumpio.so
-#LoadModule echo_module modules/mod_echo.so
-#LoadModule buffer_module modules/mod_buffer.so
-#LoadModule data_module modules/mod_data.so
-#LoadModule ratelimit_module modules/mod_ratelimit.so
-LoadModule reqtimeout_module modules/mod_reqtimeout.so
-#LoadModule ext_filter_module modules/mod_ext_filter.so
-#LoadModule request_module modules/mod_request.so
-LoadModule include_module modules/mod_include.so
-LoadModule filter_module modules/mod_filter.so
-#LoadModule reflector_module modules/mod_reflector.so
-#LoadModule substitute_module modules/mod_substitute.so
-#LoadModule sed_module modules/mod_sed.so
-#LoadModule charset_lite_module modules/mod_charset_lite.so
-#LoadModule deflate_module modules/mod_deflate.so
-#LoadModule xml2enc_module modules/mod_xml2enc.so
-#LoadModule proxy_html_module modules/mod_proxy_html.so
-LoadModule mime_module modules/mod_mime.so
-#LoadModule ldap_module modules/mod_ldap.so
-LoadModule log_config_module modules/mod_log_config.so
-#LoadModule log_debug_module modules/mod_log_debug.so
-#LoadModule log_forensic_module modules/mod_log_forensic.so
-#LoadModule logio_module modules/mod_logio.so
-#LoadModule lua_module modules/mod_lua.so
-LoadModule env_module modules/mod_env.so
-#LoadModule mime_magic_module modules/mod_mime_magic.so
-#LoadModule cern_meta_module modules/mod_cern_meta.so
-#LoadModule expires_module modules/mod_expires.so
-LoadModule headers_module modules/mod_headers.so
-#LoadModule ident_module modules/mod_ident.so
-#LoadModule usertrack_module modules/mod_usertrack.so
-#LoadModule unique_id_module modules/mod_unique_id.so
-LoadModule setenvif_module modules/mod_setenvif.so
-LoadModule version_module modules/mod_version.so
-#LoadModule remoteip_module modules/mod_remoteip.so
-LoadModule proxy_module modules/mod_proxy.so
-LoadModule proxy_connect_module modules/mod_proxy_connect.so
-LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
-LoadModule proxy_http_module modules/mod_proxy_http.so
-LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
-LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
-#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
-LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
-LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
-LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
-LoadModule proxy_express_module modules/mod_proxy_express.so
-#LoadModule session_module modules/mod_session.so
-#LoadModule session_cookie_module modules/mod_session_cookie.so
-#LoadModule session_crypto_module modules/mod_session_crypto.so
-#LoadModule session_dbd_module modules/mod_session_dbd.so
-LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
-#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
-#LoadModule ssl_module modules/mod_ssl.so
-#LoadModule dialup_module modules/mod_dialup.so
-LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
-LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
-LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
-LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
-#LoadModule mpm_event_module modules/mod_mpm_event.so
-LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
-#LoadModule mpm_worker_module modules/mod_mpm_worker.so
-LoadModule unixd_module modules/mod_unixd.so
-#LoadModule heartbeat_module modules/mod_heartbeat.so
-#LoadModule heartmonitor_module modules/mod_heartmonitor.so
-#LoadModule dav_module modules/mod_dav.so
-LoadModule status_module modules/mod_status.so
-LoadModule autoindex_module modules/mod_autoindex.so
-#LoadModule asis_module modules/mod_asis.so
-#LoadModule info_module modules/mod_info.so
-#LoadModule suexec_module modules/mod_suexec.so
-<IfModule !mpm_prefork_module>
-	#LoadModule cgid_module modules/mod_cgid.so
-</IfModule>
-<IfModule mpm_prefork_module>
-	LoadModule cgi_module modules/mod_cgi.so
-</IfModule>
-#LoadModule dav_fs_module modules/mod_dav_fs.so
-#LoadModule dav_lock_module modules/mod_dav_lock.so
-#LoadModule vhost_alias_module modules/mod_vhost_alias.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule dir_module modules/mod_dir.so
-#LoadModule imagemap_module modules/mod_imagemap.so
-#LoadModule actions_module modules/mod_actions.so
-#LoadModule speling_module modules/mod_speling.so
-LoadModule userdir_module modules/mod_userdir.so
-LoadModule alias_module modules/mod_alias.so
-#LoadModule rewrite_module modules/mod_rewrite.so
-LoadModule php5_module modules/libphp5.so
-
-<IfModule unixd_module>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# It is usually good practice to create a dedicated user and group for
-# running httpd, as with most system services.
-#
-User http
-Group http
-
-</IfModule>
-
-# 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.  e.g. admin@your-domain.com
-#
-ServerAdmin you@example.com
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-#
-#ServerName www.example.com:80
-
-#
-# Deny access to the entirety of your server's filesystem. You must
-# explicitly permit access to web content directories in other 
-# <Directory> blocks below.
-#
-<Directory />
-    AllowOverride none
-    Require all denied
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/srv/http"
-<Directory "/srv/http">
-    #
-    # Possible values for the Options directive are "None", "All",
-    # or any combination of:
-    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
-    #
-    # Note that "MultiViews" must be named *explicitly* --- "Options All"
-    # doesn't give it to you.
-    #
-    # The Options directive is both complicated and important.  Please see
-    # http://httpd.apache.org/docs/2.4/mod/core.html#options
-    # for more information.
-    #
-    Options Indexes FollowSymLinks
-
-    #
-    # AllowOverride controls what directives may be placed in .htaccess files.
-    # It can be "All", "None", or any combination of the keywords:
-    #   AllowOverride FileInfo AuthConfig Limit
-    #
-    AllowOverride None
-
-    #
-    # Controls who can get stuff from this server.
-    #
-    Require all granted
-</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-<IfModule dir_module>
-    DirectoryIndex index.html
-</IfModule>
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being 
-# viewed by Web clients. 
-#
-<Files ".ht*">
-    Require all denied
-</Files>
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "/var/log/httpd/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-<IfModule log_config_module>
-    #
-    # The following directives define some format nicknames for use with
-    # a CustomLog directive (see below).
-    #
-    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-    LogFormat "%h %l %u %t \"%r\" %>s %b" common
-
-    <IfModule logio_module>
-      # You need to enable mod_logio.c to use %I and %O
-      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
-    </IfModule>
-
-    #
-    # The location and format of the access logfile (Common Logfile Format).
-    # If you do not define any access logfiles within a <VirtualHost>
-    # container, they will be logged here.  Contrariwise, if you *do*
-    # define per-<VirtualHost> access logfiles, transactions will be
-    # logged therein and *not* in this file.
-    #
-    CustomLog "/var/log/httpd/access_log" common
-
-    #
-    # If you prefer a logfile with access, agent, and referer information
-    # (Combined Logfile Format) you can use the following directive.
-    #
-    #CustomLog "/var/log/httpd/access_log" combined
-</IfModule>
-
-<IfModule alias_module>
-    #
-    # Redirect: Allows you to tell clients about documents that used to 
-    # exist in your server's namespace, but do not anymore. The client 
-    # will make a new request for the document at its new location.
-    # Example:
-    # Redirect permanent /foo http://www.example.com/bar
-
-    #
-    # Alias: Maps web paths into filesystem paths and is used to
-    # access content that does not live under the DocumentRoot.
-    # Example:
-    # Alias /webpath /full/filesystem/path
-    #
-    # If you include a trailing / on /webpath then the server will
-    # require it to be present in the URL.  You will also likely
-    # need to provide a <Directory> section to allow access to
-    # the filesystem path.
-
-    #
-    # ScriptAlias: This controls which directories contain server scripts. 
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the target directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the
-    # client.  The same rules about trailing "/" apply to ScriptAlias
-    # directives as to Alias.
-    #
-    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
-
-</IfModule>
-
-<IfModule cgid_module>
-    #
-    # ScriptSock: On threaded servers, designate the path to the UNIX
-    # socket used to communicate with the CGI daemon of mod_cgid.
-    #
-    #Scriptsock cgisock
-</IfModule>
-
-#
-# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/srv/http/cgi-bin">
-    AllowOverride None
-    Options None
-    Require all granted
-</Directory>
-
-<IfModule mime_module>
-    #
-    # TypesConfig points to the file containing the list of mappings from
-    # filename extension to MIME-type.
-    #
-    TypesConfig conf/mime.types
-
-    #
-    # AddType allows you to add to or override the MIME configuration
-    # file specified in TypesConfig for specific file types.
-    #
-    #AddType application/x-gzip .tgz
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    #
-    #AddEncoding x-compress .Z
-    #AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    AddType application/x-compress .Z
-    AddType application/x-gzip .gz .tgz
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers":
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action directive (see below)
-    #
-    # To use CGI scripts outside of ScriptAliased directories:
-    # (You will also need to add "ExecCGI" to the "Options" directive.)
-    #
-    #AddHandler cgi-script .cgi
-
-    # For type maps (negotiated resources):
-    #AddHandler type-map var
-
-    #
-    # Filters allow you to process content before it is sent to the client.
-    #
-    # To parse .shtml files for server-side includes (SSI):
-    # (You will also need to add "Includes" to the "Options" directive.)
-    #
-    #AddType text/html .shtml
-    #AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-#MIMEMagicFile conf/magic
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# MaxRanges: Maximum number of Ranges in a request before
-# returning the entire resource, or one of the special
-# values 'default', 'none' or 'unlimited'.
-# Default setting is to accept 200 Ranges.
-#MaxRanges unlimited
-
-#
-# EnableMMAP and EnableSendfile: On systems that support it, 
-# memory-mapping or the sendfile syscall may be used to deliver
-# files.  This usually improves server performance, but must
-# be turned off when serving from networked-mounted 
-# filesystems or if support for these functions is otherwise
-# broken on your system.
-# Defaults: EnableMMAP On, EnableSendfile Off
-#
-#EnableMMAP off
-#EnableSendfile on
-
-# Supplemental configuration
-#
-# The configuration files in the conf/extra/ directory can be 
-# included to add extra features or to modify the default configuration of 
-# the server, or you may simply copy their contents here and change as 
-# necessary.
-
-# Server-pool management (MPM specific)
-Include conf/extra/httpd-mpm.conf
-
-# Multi-language error messages
-Include conf/extra/httpd-multilang-errordoc.conf
-
-# Fancy directory listings
-Include conf/extra/httpd-autoindex.conf
-
-# Language settings
-Include conf/extra/httpd-languages.conf
-
-# User home directories
-Include conf/extra/httpd-userdir.conf
-
-# Real-time info on requests and configuration
-#Include conf/extra/httpd-info.conf
-
-# Virtual hosts
-#Include conf/extra/httpd-vhosts.conf
-
-# Local access to the Apache HTTP Server Manual
-#Include conf/extra/httpd-manual.conf
-
-# Distributed authoring and versioning (WebDAV)
-#Include conf/extra/httpd-dav.conf
-
-# Various default settings
-Include conf/extra/httpd-default.conf
-
-# Configure mod_proxy_html to understand HTML4/XHTML1
-<IfModule proxy_html_module>
-Include conf/extra/proxy-html.conf
-</IfModule>
-
-# PHP
-Include conf/extra/php5_module.conf
-Include /etc/httpd/conf/extra/httpd-zoneminder.conf
-# Secure (SSL/TLS) connections
-#Include conf/extra/httpd-ssl.conf
-#
-# Note: The following must must be present to support
-#       starting without SSL on platforms with no /dev/random equivalent
-#       but a statically compiled-in mod_ssl.
-#
-<IfModule ssl_module>
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
-</IfModule>
-#
-# uncomment out the below to deal with user agents that deliberately
-# violate open standards by misusing DNT (DNT *must* be a specific
-# end-user choice)
-#
-#<IfModule setenvif_module>
-#BrowserMatch "MSIE 10.0;" bad_DNT
-#</IfModule>
-#<IfModule headers_module>
-#RequestHeader unset DNT env=bad_DNT
-#</IfModule>
-