upd

1 files changed, 0 insertions, 272 deletions

diff --git a/hciconfig.1 b/hciconfig.1
deleted file mode 100644
index 633ffa3ff494..000000000000
--- a/hciconfig.1
+++ /dev/null
@@ -1,272 +0,0 @@
-.TH HCICONFIG 1 "Nov 11 2002" BlueZ "Linux System Administration"
-.SH NAME
-hciconfig \- configure Bluetooth devices
-.SH SYNOPSIS
-.B hciconfig
-.B \-h
-.br
-.B hciconfig
-.RB [\| \-a \|]
-.br
-.B hciconfig
-.RB [\| \-a \|]
-.B hciX
-.RI [\| command
-.RI [\| "command parameters" \|]\|]
-
-.SH DESCRIPTION
-.LP
-.B hciconfig
-is used to configure Bluetooth devices.
-.I hciX
-is the name of a Bluetooth device installed in the system. If
-.I hciX
-is not given,
-.B hciconfig
-prints name and basic information about all the Bluetooth devices installed in
-the system. If
-.I hciX
-is given but no command is given, it prints basic information on device
-.I hciX
-only. Basic information is
-interface type, BD address, ACL MTU, SCO MTU, flags (up, init, running, raw,
-page scan enabled, inquiry scan enabled, inquiry, authentication enabled,
-encryption enabled).
-.SH OPTIONS
-.TP
-.B \-h, \-\-help
-Gives a list of possible commands.
-.TP
-.B \-a, \-\-all
-Other than the basic info, print features, packet type, link policy, link mode,
-name, class, version.
-.SH COMMANDS
-.TP
-.B up
-Open and initialize HCI device.
-.TP
-.B down
-Close HCI device.
-.TP
-.B reset
-Reset HCI device.
-.TP
-.B rstat
-Reset statistic counters.
-.TP
-.B auth
-Enable authentication (sets device to security mode 3).
-.TP
-.B noauth
-Disable authentication.
-.TP
-.B encrypt
-Enable encryption (sets device to security mode 3).
-.TP
-.B noencrypt
-Disable encryption.
-.TP
-.B secmgr
-Enable security manager (current kernel support is limited).
-.TP
-.B nosecmgr
-Disable security manager.
-.TP
-.B piscan
-Enable page and inquiry scan.
-.TP
-.B noscan
-Disable page and inquiry scan.
-.TP
-.B iscan
-Enable inquiry scan, disable page scan.
-.TP
-.B pscan
-Enable page scan, disable inquiry scan.
-.TP
-\fBptype\fP [\fItype\fP]
-With no
-.I type
-, displays the current packet types. Otherwise, all the packet types specified
-by
-.I type
-are set.
-.I type
-is a comma-separated list of packet types, where the possible packet types are
-.BR DM1 ,
-.BR DM3 ,
-.BR DM5 ,
-.BR DH1 ,
-.BR DH3 ,
-.BR DH5 ,
-.BR HV1 ,
-.BR HV2 ,
-.BR HV3 .
-.TP
-.BI name " [name]"
-With no
-.IR name ,
-prints local name. Otherwise, sets local name to
-.IR name .
-.TP
-.BI class " [class]"
-With no
-.IR class ,
-prints class of device. Otherwise, sets class of device to
-.IR class .
-.I
-class
-is a 24-bit hex number describing the class of device, as specified in section
-1.2 of the Bluetooth Assigned Numers document.
-.TP
-.BI voice " [voice]"
-With no
-.IR voice ,
-prints voice setting. Otherwise, sets voice setting to
-.IR voice .
-.I voice
-is a 16-bit hex number describing the voice setting.
-.TP
-.BI iac " [iac]"
-With no
-.IR iac ,
-prints the current IAC setting. Otherwise, sets the IAC to
-.IR iac .
-.TP
-.BI inqtpl " [level]"
-With no
-.IR level ,
-prints out the current inquiry transmit power level. Otherwise, sets
-inquiry transmit power level to
-.IR level .
-.TP
-.BI inqmode " [mode]"
-With no
-.IR mode ,
-prints out the current inquiry mode. Otherwise, sets inquiry mode to
-.IR mode .
-.TP
-.BI inqdata " [data]"
-With no
-.IR name ,
-prints out the current inquiry data. Otherwise, sets inquiry data to
-.IR data .
-.TP
-.BI inqtype " [type]"
-With no
-.IR type ,
-prints out the current inquiry scan type. Otherwise, sets inquiry scan type to
-.IR type .
-.TP
-\fBinqparams\fP [\fIwin\fP:\fIint\fP]
-With no
-.IR win : int ,
-prints inquiry scan window and interval. Otherwise, sets inquiry scan window
-to
-.I win
-slots and inquiry scan interval to
-.I int
-slots.
-.TP
-\fBpageparms\fP [\fIwin\fP:\fIint\fP]
-With no
-.IR win : int ,
-prints page scan window and interval. Otherwise, sets page scan window to
-.I win
-slots and page scan interval to
-.I int
-slots.
-.TP
-.BI pageto " [to]"
-With no
-.IR to ,
-prints page timeout. Otherwise, sets page timeout
-to .I
-to
-slots.
-.TP
-.BI afhmode " [mode]"
-With no
-.IR mode ,
-prints out the current AFH mode. Otherwise, sets AFH mode to
-.IR mode .
-.TP
-.BI sspmode " [mode]"
-With no
-.IR mode ,
-prints out the current Simple Pairing mode. Otherwise, sets Simple Pairing mode to
-.IR mode .
-.TP
-\fBaclmtu\fP \fImtu\fP:\fIpkt\fP
-Sets ACL MTU to
-to
-.I mtu
-bytes and ACL buffer size to
-.I pkt
-packets.
-.TP
-\fBscomtu\fP \fImtu\fP:\fIpkt\fP
-Sets SCO MTU to
-.I mtu
-bytes and SCO buffer size to
-.I pkt
-packets.
-.TP
-.BI delkey " <bdaddr>"
-This command deletes the stored link key for
-.I bdaddr
-from the device.
-.TP
-.BI oobdata
-Get local OOB data (invalidates previously read data).
-.TP
-.BI commands
-Display supported commands.
-.TP
-.BI features
-Display device features.
-.TP
-.BI version
-Display version information.
-.TP
-.BI revision
-Display revision information.
-.TP
-.BI lm " [mode]"
-With no
-.I mode
-, prints link mode.
-.B MASTER
-or
-.B SLAVE
-mean, respectively, to ask to become master or to remain slave when a
-connection request comes in. The additional keyword
-.B ACCEPT
-means that baseband  connections will be accepted even if there are no
-listening
-.I AF_BLUETOOTH
-sockets.
-.I mode
-is
-.B NONE
-or a comma-separated list of keywords, where possible keywords are
-.B MASTER
-and
-.B "ACCEPT" .
-.B NONE
-sets link policy to the default behaviour of remaining slave and not accepting
-baseband connections when there are no listening
-.I AF_BLUETOOTH
-sockets. If
-.B MASTER
-is present, the device will ask to become master if a connection request comes
-in. If
-.B ACCEPT
-is present, the device will accept baseband connections even when there are no
-listening
-.I AF_BLUETOOTH
-sockets.
-.SH AUTHORS
-Written by Maxim Krasnyansky <maxk@qualcomm.com> and Marcel Holtmann <marcel@holtmann.org>
-.PP
-man page by Fabrizio Gennari <fabrizio.gennari@philips.com>