summarylogtreecommitdiffstats
path: root/rfcomm.1
diff options
context:
space:
mode:
authorSergej Pupykin2017-05-29 20:58:36 +0300
committerSergej Pupykin2017-05-29 20:59:59 +0300
commit69646cb00f4daf9c1900a024f2c114824f75d651 (patch)
tree1758590b5d8242035f4d796682c2bf1d66b0d29e /rfcomm.1
downloadaur-69646cb00f4daf9c1900a024f2c114824f75d651.tar.gz
init
Diffstat (limited to 'rfcomm.1')
-rw-r--r--rfcomm.1113
1 files changed, 113 insertions, 0 deletions
diff --git a/rfcomm.1 b/rfcomm.1
new file mode 100644
index 00000000000..a10860984f6
--- /dev/null
+++ b/rfcomm.1
@@ -0,0 +1,113 @@
+.\"
+.\" This program is free software; you can redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as published by
+.\" the Free Software Foundation; either version 2 of the License, or
+.\" (at your option) any later version.
+.\"
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License
+.\" along with this program; if not, write to the Free Software
+.\" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+.\"
+.\"
+.TH RFCOMM 1 "APRIL 28, 2002" "" ""
+
+.SH NAME
+rfcomm \- RFCOMM configuration utility
+.SH SYNOPSIS
+.BR "rfcomm
+[
+.I options
+] <
+.I command
+> <
+.I dev
+>
+.SH DESCRIPTION
+.B rfcomm
+is used to set up, maintain, and inspect the RFCOMM configuration
+of the Bluetooth subsystem in the Linux kernel. If no
+.B command
+is given, or if the option
+.B -a
+is used,
+.B rfcomm
+prints information about the configured RFCOMM devices.
+.SH OPTIONS
+.TP
+.BI -h
+Gives a list of possible commands.
+.TP
+.BI -a
+Prints information about all configured RFCOMM devices.
+.TP
+.BI -r
+Switch TTY into raw mode (doesn't work with "bind").
+.TP
+.BI -i " <hciX> | <bdaddr>"
+The command is applied to device hciX, which must be the name or the address of
+an installed Bluetooth device. If not specified, the command will be use the
+first available Bluetooth device.
+.TP
+.BI -A
+Enable authentification
+.TP
+.BI -E
+Enable encryption
+.TP
+.BI -S
+Secure connection
+.TP
+.BI -M
+Become the master of a piconet
+.TP
+.BI -L " <seconds>"
+Set linger timeout
+.SH COMMANDS
+.TP
+.BI show " <dev>"
+Display the information about the specified device.
+.TP
+.BI connect " <dev> [bdaddr] [channel]"
+Connect the RFCOMM device to the remote Bluetooth device on the
+specified channel. If no channel is specified, it will use the
+channel number 1. This command can be terminated with the key
+sequence CTRL-C.
+.TP
+.BI listen " <dev> [channel] [cmd]"
+Listen on a specified RFCOMM channel for incoming connections.
+If no channel is specified, it will use the channel number 1, but
+a channel must be specified before cmd. If cmd is given, it will be
+executed as soon as a client connects. When the child process
+terminates or the client disconnect, the command will terminate.
+Occurrences of {} in cmd will be replaced by the name of the device
+used by the connection. This command can be terminated with the key
+sequence CTRL-C.
+.TP
+.BI watch " <dev> [channel] [cmd]"
+Watch is identical to
+.B listen
+except that when the child process terminates or the client
+disconnect, the command will restart listening with the same
+parameters.
+.TP
+.BI bind " <dev> [bdaddr] [channel]"
+This binds the RFCOMM device to a remote Bluetooth device. The
+command does not establish a connection to the remote device, it
+only creates the binding. The connection will be established right
+after an application tries to open the RFCOMM device. If no channel
+number is specified, it uses the channel number 1.
+.TP
+.BI release " <dev>"
+This command releases a defined RFCOMM binding.
+
+If
+.B all
+is specified for the RFCOMM device, then all bindings will be removed.
+.SH AUTHOR
+Written by Marcel Holtmann <marcel@holtmann.org>.
+.br