1 files changed, 106 insertions, 0 deletions
diff --git a/00-vdr.conf b/00-vdr.conf
new file mode 100644
index 000000000000..80a25245f0a8
--- /dev/null
+++ b/00-vdr.conf
@@ -0,0 +1,106 @@
+[vdr]
+#--audio=cmd
+#    Send Dolby Digital audio to stdin of command cmd.
+
+#--cachedir=dir
+#    Save cache files in dir (default is /var/cache/vdr).
+
+--chartab=ISO-8859-15
+#    set the character table to use for strings in the
+#    DVB data stream that don't begin with a character
+#    table indicator, but don't use the standard default
+#    character table (for instance ISO-8859-9)
+
+#--config=dir
+#    Read config files from directory dir (default is /var/lib/vdr).
+
+#--daemon
+#    Run in daemon mode (implies --no-kbd).
+
+#--device=num
+#    Use only the given DVB device (num = 0, 1, 2...).  There may be several -D options (by default all
+#    DVB devices will be used).
+
+#--dirnames=path[,name[,enc]]
+#    Set  the  maximum  directory path length to path (default is the maximum value allowed on the sys‐
+#    tem). If name is also given, it defines the maximum directory name length (default is the  maximum
+#    value  allowed on the system).  The optional enc can be 0 or 1, and controls whether special char‐
+#    acters in directory names are encoded as hex values (default: 0).  If path or name are left  empty
+#    (as  in  ",,1"  to  only set enc), the defaults apply.  The length of the video directory name and
+#    that of the actual recording directory is subtracted from path, to make sure  the  directory  path
+#    will never become too long.
+
+#--epgfile=file
+#    Write the EPG data into the given file (default is epg.data in the cache directory).  Use  -E-  to
+#    disable this.  If file is a directory, the file epg.data will be created in that directory.
+
+#--filesize=size
+#    Limit  video  files  to  size bytes (default is 2000M).  This option is only useful in conjunction
+#    with --edit, and must precede that option to have an effect.  size is an integer number and may be
+#    followed by one of the letters K, M, G or T to abbreviate Kilo-, Mega-, Giga- or Terabyte, respec‐
+#    tively.  The given value is silently limited to the program's internal minimum and maximum values.
+
+--grab=/tmp
+#    Write images from the SVDRP command GRAB into the given directory dir. dir must be the  full  path
+#    name  of an existing directory, without any "..", double '/' or symlinks. By default, or if -g- is
+#    given, grabbing images to disk is disabled.
+
+#--instance=instance
+#    Use instance as the id of this VDR instance (default is  0).   In  an  environment  where  several
+#    instances  of  VDR  use  the same video directory, this parameter can be set to a positive integer
+#    value that's unique for each instance, so that they won't interfere with each other in  case  they
+#    record  exactly  the  same broadcast.  The number given here will be part of the directory name in
+#    which the recordings will be stored.
+
+--log=2
+#    Set logging to level.  0 = no logging, 1 = errors only, 2 = errors and info, 3 = errors, info  and
+#    debug.   The  default  logging  level  is  3.   If logging should be done to LOG_LOCALn instead of
+#    LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
+
+#--lib=dir
+#    Search for plugins in directory dir (default is /usr/lib/vdr/plugins).  There can be several  -L  options
+#    with different dir values.  Each of them will apply to the -P options following it.
+
+#--lirc[=path]
+#    Use a LIRC remote control device.  If path is omitted, vdr uses /var/run/lirc/lircd.
+
+#--localedir=dir
+#    Search for locale files in dir (default is /usr/share/locale).
+
+#--mute
+#    Mute audio of the primary DVB device at startup.
+
+#--no-kbd
+#    Don't use the keyboard as an input device.
+
+#--port=port
+#    Use  port  for  SVDRP. A value of 0 turns off SVDRP.  The default SVDRP port is 6419.  You need to
+#    edit the file svdrphosts.conf in order to enable access to the SVDRP port.
+#
+
+#--record=cmd
+#    Call cmd before and after a recording. See the file INSTALL for more information.
+
+#--resdir=dir
+#    Read resource files from dir (default is /usr/share/vdr).
+
+--shutdown=/usr/lib/vdr/bin/shutdown-wrapper
+#    Call cmd to shutdown the computer. See the file INSTALL for more information.
+
+#--terminal=tty
+#    Set the controlling terminal.
+
+#--user=user
+#    Run as user user in case vdr was started as user 'root'.  Starting vdr as 'root' is  necessary  if
+#    the system time shall be set from the transponder data, but for security reasons vdr can switch to
+#    a lesser privileged user id during normal operation. The default is 'vdr'
+
+#--userdump
+#    Allow coredumps if -u is given (only for debugging).
+
+#--video=dir
+#    Use dir as video directory.  The default is /srv/vdr/video.
+
+--watchdog=90
+#    Activate the watchdog timer with a timeout of sec seconds.  A value of 0  (default)  disables  the
+#    watchdog.