diff options
Diffstat (limited to '0010-usb-core-add-power-sequence-handling-for-USB-devices.patch')
| -rw-r--r-- | 0010-usb-core-add-power-sequence-handling-for-USB-devices.patch | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch b/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch deleted file mode 100644 index ddebef4f0ae3..000000000000 --- a/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch +++ /dev/null @@ -1,164 +0,0 @@ -From 1358757f34c7feff4aab541814c73f6cf3e83b69 Mon Sep 17 00:00:00 2001 -From: Peter Chen <peter.chen@nxp.com> -Date: Wed, 21 Jun 2017 14:42:05 +0800 -Subject: [PATCH 10/14] usb: core: add power sequence handling for USB devices - -Some hard-wired USB devices need to do power sequence to let the -device work normally, the typical power sequence like: enable USB -PHY clock, toggle reset pin, etc. But current Linux USB driver -lacks of such code to do it, it may cause some hard-wired USB devices -works abnormal or can't be recognized by controller at all. - -In this patch, it calls power sequence library APIs to finish -the power sequence events. It will do power on sequence at hub's -probe for all devices under this hub (includes root hub). -At hub_disconnect, it will do power off sequence which is at powered -on list. - -Signed-off-by: Peter Chen <peter.chen@nxp.com> -Tested-by Joshua Clayton <stillcompiling@gmail.com> -Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> -Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com> -Acked-by: Alan Stern <stern@rowland.harvard.edu> ---- - drivers/usb/Kconfig | 1 + - drivers/usb/core/hub.c | 49 ++++++++++++++++++++++++++++++++++++++---- - drivers/usb/core/hub.h | 1 + - 3 files changed, 47 insertions(+), 4 deletions(-) - -diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig -index 987fc5ba6321..bd09fc8ff763 100644 ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -45,6 +45,7 @@ config USB - tristate "Support for Host-side USB" - depends on USB_ARCH_HAS_HCD - select USB_COMMON -+ select POWER_SEQUENCE - select NLS # for UTF-8 strings - ---help--- - Universal Serial Bus (USB) is a specification for a serial bus -diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c -index fcae521df29b..0c708d3ef179 100644 ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -28,6 +28,7 @@ - #include <linux/mutex.h> - #include <linux/random.h> - #include <linux/pm_qos.h> -+#include <linux/power/pwrseq.h> - - #include <linux/uaccess.h> - #include <asm/byteorder.h> -@@ -1654,6 +1655,7 @@ static void hub_disconnect(struct usb_interface *intf) - hub->error = 0; - hub_quiesce(hub, HUB_DISCONNECT); - -+ of_pwrseq_off_list(&hub->pwrseq_list); - mutex_lock(&usb_port_peer_mutex); - - /* Avoid races with recursively_mark_NOTATTACHED() */ -@@ -1700,11 +1702,41 @@ static bool hub_descriptor_is_sane(struct usb_host_interface *desc) - return true; - } - -+#ifdef CONFIG_OF -+static int hub_of_pwrseq_on(struct usb_hub *hub) -+{ -+ struct device *parent; -+ struct usb_device *hdev = hub->hdev; -+ struct device_node *np; -+ int ret; -+ -+ if (hdev->parent) -+ parent = &hdev->dev; -+ else -+ parent = bus_to_hcd(hdev->bus)->self.sysdev; -+ -+ for_each_child_of_node(parent->of_node, np) { -+ ret = of_pwrseq_on_list(np, &hub->pwrseq_list); -+ /* Maybe no power sequence library is chosen */ -+ if (ret && ret != -ENOENT) -+ return ret; -+ } -+ -+ return 0; -+} -+#else -+static int hub_of_pwrseq_on(struct usb_hub *hub) -+{ -+ return 0; -+} -+#endif -+ - static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - { - struct usb_host_interface *desc; - struct usb_device *hdev; - struct usb_hub *hub; -+ int ret = -ENODEV; - - desc = intf->cur_altsetting; - hdev = interface_to_usbdev(intf); -@@ -1795,6 +1827,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - INIT_DELAYED_WORK(&hub->leds, led_work); - INIT_DELAYED_WORK(&hub->init_work, NULL); - INIT_WORK(&hub->events, hub_event); -+ INIT_LIST_HEAD(&hub->pwrseq_list); - usb_get_intf(intf); - usb_get_dev(hdev); - -@@ -1808,11 +1841,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) - hub->quirk_check_port_auto_suspend = 1; - -- if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) -- return 0; -+ if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { -+ ret = hub_of_pwrseq_on(hub); -+ if (!ret) -+ return 0; -+ } - - hub_disconnect(intf); -- return -ENODEV; -+ return ret; - } - - static int -@@ -3653,14 +3689,19 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) - - /* stop hub_wq and related activity */ - hub_quiesce(hub, HUB_SUSPEND); -- return 0; -+ return pwrseq_suspend_list(&hub->pwrseq_list); - } - - static int hub_resume(struct usb_interface *intf) - { - struct usb_hub *hub = usb_get_intfdata(intf); -+ int ret; - - dev_dbg(&intf->dev, "%s\n", __func__); -+ ret = pwrseq_resume_list(&hub->pwrseq_list); -+ if (ret) -+ return ret; -+ - hub_activate(hub, HUB_RESUME); - return 0; - } -diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h -index 4accfb63f7dc..abe71c5e84cb 100644 ---- a/drivers/usb/core/hub.h -+++ b/drivers/usb/core/hub.h -@@ -70,6 +70,7 @@ struct usb_hub { - struct delayed_work init_work; - struct work_struct events; - struct usb_port **ports; -+ struct list_head pwrseq_list; /* powered pwrseq node list */ - }; - - /** --- -2.18.0 - |