diff options
| -rw-r--r-- | .SRCINFO | 44 | ||||
| -rw-r--r-- | PKGBUILD | 526 | ||||
| -rw-r--r-- | faxgetty@.service | 23 | ||||
| -rw-r--r-- | faxq.service | 11 | ||||
| -rwxr-xr-x | fmfix.pl | 71 | ||||
| -rw-r--r-- | hfaxd.service | 11 | ||||
| -rw-r--r-- | hylafax.cron.daily | 5 | ||||
| -rw-r--r-- | hylafax.install | 87 | ||||
| -rw-r--r-- | hylafax.service | 13 | ||||
| -rw-r--r-- | hylafax.timer | 11 | ||||
| -rw-r--r-- | sendfaxvsi-1.0.tgz | bin | 0 -> 6097 bytes |
11 files changed, 802 insertions, 0 deletions
diff --git a/.SRCINFO b/.SRCINFO new file mode 100644 index 000000000000..50177f2fd73c --- /dev/null +++ b/.SRCINFO @@ -0,0 +1,44 @@ +pkgbase = hylafaxplus + pkgdesc = Enterprise Fax Server + pkgver = 5.5.6 + pkgrel = 1 + url = http://hylafax.sourceforge.net/ + install = hylafax.install + arch = i686 + arch = x86_64 + license = custom:SGI + depends = dash + depends = libtiff + depends = pam + depends = ghostscript + depends = gsfonts + depends = sharutils + depends = jbigkit + depends = lcms2 + depends = smtp-server + optdepends = avantfax: manage HylaFAX+ through web browser + optdepends = t38modem: sip/voip fax modem pool interface + optdepends = fax4cups: CUPS fax printer + optdepends = faxfrontend: CUPS fax printer + optdepends = 2Fax: ascii to fax generator including pictures and fonts + provides = hylafax + conflicts = hylafax + source = http://downloads.sourceforge.net/hylafax/hylafax-5.5.6.tar.gz + source = hylafax.timer + source = hylafax.service + source = fmfix.pl + source = faxq.service + source = hfaxd.service + source = faxgetty@.service + source = sendfaxvsi-1.0.tgz + sha256sums = 15ccb66d076d1bc399eb2358291fe33b64ddeca23ccdbb691b75039b5ef5ee2e + sha256sums = ad13d5171f5a8eb55a5773fc429dcef8418db90a8742cec18484534e86198da8 + sha256sums = 7b481d783f3c18303acd7d650321313302401e780616dce1f80b71a210bb58cf + sha256sums = c9e9ad380aa50282125d2693e1ce7b65dedf4f5df22032a3fa60fbd1a75c87d9 + sha256sums = 55505ff501e36281aa2b9c85fe0609d9cd04428a4b6d36e2754919411b615d2d + sha256sums = be96cf8c5fc14fde96c7d37dc9ba2e604aeebe57ce8d5c95dd7567d7e794f3b0 + sha256sums = 3f4cddd872be106041ecc460b7d738a5612668f447c783d5c9e71d9c1b7f62bb + sha256sums = e80c6ffcb5f48bc1bf746b12d40abb94fe5ae79558edfad9c509ade6778cf2cf + +pkgname = hylafaxplus + diff --git a/PKGBUILD b/PKGBUILD new file mode 100644 index 000000000000..dca2c1f5f4fe --- /dev/null +++ b/PKGBUILD @@ -0,0 +1,526 @@ +# Maintainer: Chris Severance aur.severach aATt spamgourmet dott com +# Contributor: vicks <aur-hylafaxplus@p.lalouisianaise.com> +# Category: daemons + +# Note: These TODO may not be things I'm planning to fix. Some of them are just +# notes to be fixed by someone else who wants that functionality and warnings +# to those who are expecting that functionality. The HylaFAX+ and AvantFAX +# PKGBUILD have taken many days to get them functional on a modern OS. +# I can't spend a lot more time fixing things I don't use without help. + +# TODO: Check Arch Linux in TARGET="...unknown..." +# TODO: More systemd boot support (faxmodem). +# TODO: SendEmail/smtp-cli.pl support instead of sendmail/postfix + +# WANT: Enabled Feature List: client, server, send fax, answer fax, answer modem, answer voice +# WANT: CLI fax manager (avantfax?) +# WANT: faxstat how to show only the last n days, like tail? +# WANT: a faxmovemodem: to rename or remove modem without shutting fax system down, compatible with faxmodem and faxgetty. + +# TODO: Automatically fix font path in /usr/lib/fax/hyla.conf whenever ghostscript upgrades. +# TODO: Cover pages in PKGBUILD for ready made installs. +# TODO: faxcron timer run as uucp. faxqclean must run as root. +# TODO: find more optional dependencies + +# Setup these parameters + +_opt_AreaCode="517" +_opt_FAXNumber="+1.517.555.0001" # Default: +1.517.555.0001 +_opt_LocalIdentifier="ArchLinuxFAX" # Default: ArchLinuxFAX +_opt_RingsBeforeAnswer="1" # set to 0 to make faxgetty send only +_opt_MaintenanceTime="06:10:00" # Cleanup will run every 12 hours starting at this time + +_opt_hosts_hfaxd="192.168.[0-9]+.[0-9]+" # Default "", hosts to add to hosts.hfaxd +_opt_pagesize="Letter" # A4, Letter, Legal + +# How to install: +# Recommended build command: makepkg -scCfi + +# Before running faxsetup, let's see which daemons we want to run. +# man faxq # used only if modems are present on this system +# man hfaxd # also read the part about SNPP +# Enable the ones you want. faxsetup will start them. +# systemctl enable faxq +# systemctl enable hfaxd + +# sudo faxsetup + +# faxsetup will ask to run faxaddmodem only if there are no modems set up. +# Answer yes if you like but you might as well answer no to +# Do you want to run faxaddmodem to configure a modem [yes]? no +# because you'll need to run faxaddmodem anyways to add more modems. + +# You can run with or without faxgetty +# faxgetty makes your setup more reliable and easier to manage. +# faxgetty is suitable for send/receive or send only environments. +# faxgetty is not required. If using faxgetty answer "NO" to +# Should I run faxmodem for each configured modem [yes]? no +# and enable/start your modems. +# faxmodem systemd support is incomplete. Modems will not autostart on boot. + +# sudo faxaddmodem +# Add as many modems as you like. See below for some untested high speed techniques. + +# Enable one of the modems with some of the following commands. + +# sudo systemctl enable faxgetty@ttyUSB0.service +# sudo systemctl start faxgetty@ttyUSB0.service +# sudo systemctl enable faxgetty@ttyACM0.service +# sudo systemctl start faxgetty@ttyACM0.service + +# You only need to enable the first faxgetty service manually. faxsetup will +# detect that faxgetty is in use and automatically enable and start all +# configured modems. When all modems are added run faxsetup again to restart +# the servers and enable all modems. + +# sudo faxsetup + +# HylaFAX recommends you run faxsetup to restart the servers after every +# upgrade. This PKGBUILD is programmed to not require this. You need to run +# faxsetup whenever ghostscript upgrades or the fonts won't be found. This +# needs to be fixed if anyone can figure out how. + +# Are the services running? +# systemctl status faxq +# systemctl status hfaxd +# systemctl list-units "faxgetty@*.service" +# systemctl list-timers + +# Once you have a modem set up with phone line unplugged +# sendfax -n -d 5175551212 /etc/passwd +# Once you see that the modem is trying to send, let's see the job. +# faxstat -s +# Let's delete that job (change the id as necessary) +# faxrm 1 +# Be patient. This can take a minute if the job is active on a modem in faxq. +# Let's see what happened to that job. +# faxstat -sd +# After you get a few real faxes sent, let's see how we're performing. +# xferfaxstats +# Let's see a log file +# less /var/spool/hylafax/etc/xferfaxlog + +# Avoid restarting the daemons manually with systemctl. Too many commands, and +# too tricky. Use faxsetup to restart the daemons and enable the modems. + +# If the skel defaults are correct and prefab modem configs are available a +# large number of modems could be automatically set up this way. +# cd /dev; for i in ttyUSB[1-3]; do faxaddmodem -nointeractive -s 38400 $i; done + +# Once the first one is set up, a fast, loose, and untested method for a very +# large number of identical modems could work like this: +# cd /dev +# mdmlist=`echo ttyUSB* ttyS* ttya[a-m]*` # example 8 USB, 4 serial, 13*16=832 Digi PortServer (dgrp). +# # This is ridiculous of course since there's no single computer with enough +# # power to run 844 fax modems. +# cd /var/spool/hylafax +# for ttymdm in $mdmlist; do +# if [ "$ttymdm" != "ttyUSB0" ]; then +# cp -p /etc/config.ttyUSB0 /etc/config.$ttymdm +# mkfifo FIFO.$ttymdm +# # faxmodem $ttymdm +# systemctl enable faxgetty@$ttymodem.service +# systemctl start faxgetty@$ttymodem.service +# fi +# done + +# Helpful guides +# Arch Wiki: https://wiki.archlinux.org/index.php/Hylafax +# Debian Wiki: https://wiki.debian.org/HylaFax +# Gentoo Wiki: http://www.gentoo-wiki.info/HylaFAX +# Univention Wiki: http://wiki.univention.com/index.php?title=HylaFAX_setup +# HylaFAX user contributions: ftp://ftp.hylafax.org/contrib/ + +# VGETTY: http://www.cril.ch/anciens_projets.html.html#vgetty_voice_mail_and_extensions Vgetty Documentation Center +# VGETTY: http://alpha.greenie.net/vgetty/ + +# Linux modem support is troublesome. Serial based products all create ttys +# which requires them to be kernel modules. Linux changes the kernel interface +# constantly for peak functionality and performance. This means that many +# modem products work for a while then quit working as of a certain kernel +# version. Manufacturers much prefer Windows where driver compatibility is +# maintained over many versions rather than going back to revise the driver +# each time the Linux kernel devs change something. Arch Linux as a rolling +# release is on the front lines of this constant change. Modems are a +# declining market so manufacturers have little interest in continuously +# revising drivers. The solution for us is to stick to interfaces that are +# actively maintained either by the manufacturers or by the Linux kernel devs. + +# Here are the ones that continue to work even on the latest kernels. I'm only +# listing brands with 2 or more ports and modems I've tried. Multi port serial +# products is sorted by number of lights. I'm only listing products similar +# to those I've tried. There may be other well supported products. + +# Ethernet serial: Digi PortServer dgrp +# Note: Some fax documentation recommend against Ethernet serial servers +# because of the unpredictable delays inherent in Ethernet communication. +# I don't see any other way to support hundreds of modems. +# FTDI USB Serial 2: VSCOM +# FTDI USB Serial 2: Perle Ultraport +# FTDI USB Serial 2: Sewell +# FTDI USB Serial 2: BrainBoxes US +# FTDI USB Serial 2: B&B Electronics ULINX +# FTDI USB Serial 2: Startech +# FTDI USB Serial 2: SIIG +# FTDI USB Serial 2: SerialGear +# FTDI USB Serial 2: EasySYNC +# FTDI USB Serial 2: Shentek +# FTDI USB Serial 1: SeaLevel SeaLINK +# FTDI USB Serial 0: Digi Edgeport +# FTDI USB Serial 0: Comtrol RocketPort +# FTDI USB Serial 0: Hightek HK +# ACM USB Serial: Zyxel Multitech MT5634ZBA-USB-V.92-AV +# (This modem is properly supported by usbserial & udev in Linux 4.0+. You +# don't need the mknod instructions found at the Multitech web site.) + +# I prefer USB over PCI, PCIe, or Ethernet. Ethernet has timing issues. +# No reason to compete for a limited number of high performance PCIe slots +# with low performance serial devices. ISA, EISA, VESA, PCI, PCIe are all +# temporary technologies that will be replaced eventually. USB will last +# essentially forever with no changes. + +# For an interesting discussion of Hylafax vs Hylafax+ vs vsi-fax see: +# http://lists.opensuse.org/opensuse/2009-09/msg00269.html +# Re: [opensuse] Update Hylafax 4.4 to 6.03 with src.rpm on OpenSuSE 10.3 + +set -u +pkgname='hylafaxplus' +_pkgnick='hylafax' +pkgver='5.5.6' +pkgrel='1' +pkgdesc='Enterprise Fax Server' +arch=('i686' 'x86_64') +install='hylafax.install' +license=('custom:SGI') +depends=('dash' 'libtiff' 'pam' 'ghostscript' 'gsfonts' 'sharutils' 'jbigkit' 'lcms2' 'smtp-server') # 'cron' +# BASE64 is the default so HylaFAX+ doesn't need uuencode but I put it in anyways to placate configure and the bin finder in faxsetup! +url='http://hylafax.sourceforge.net/' +provides=('hylafax') +conflicts=('hylafax') +# backup=(var/spool/hylafax/bin/{faxrcvd,notify}) +# 'var/spool/hylafax/etc/hosts.hfaxd') # This is better handled with a .default file. +source=("http://downloads.sourceforge.net/hylafax/${_pkgnick}-${pkgver}.tar.gz" + hylafax.{timer,service} + 'fmfix.pl' + 'faxq.service' + 'hfaxd.service' + 'faxgetty@.service' + 'sendfaxvsi-1.0.tgz') +sha256sums=('15ccb66d076d1bc399eb2358291fe33b64ddeca23ccdbb691b75039b5ef5ee2e' + 'ad13d5171f5a8eb55a5773fc429dcef8418db90a8742cec18484534e86198da8' + '7b481d783f3c18303acd7d650321313302401e780616dce1f80b71a210bb58cf' + 'c9e9ad380aa50282125d2693e1ce7b65dedf4f5df22032a3fa60fbd1a75c87d9' + '55505ff501e36281aa2b9c85fe0609d9cd04428a4b6d36e2754919411b615d2d' + 'be96cf8c5fc14fde96c7d37dc9ba2e604aeebe57ce8d5c95dd7567d7e794f3b0' + '3f4cddd872be106041ecc460b7d738a5612668f447c783d5c9e71d9c1b7f62bb' + 'e80c6ffcb5f48bc1bf746b12d40abb94fe5ae79558edfad9c509ade6778cf2cf') +optdepends=('avantfax: manage HylaFAX+ through web browser' + #'HERMESfax: manage HylaFAX+ through web browser' # Way too old + 't38modem: sip/voip fax modem pool interface' + 'fax4cups: CUPS fax printer' # http://vigna.di.unimi.it/fax4CUPS/ + 'faxfrontend: CUPS fax printer' # https://www.vitki.net/book/page/integrating-hylafax-cups + '2Fax: ascii to fax generator including pictures and fonts' # http://www.atbas.org/2fax/ascii.php + #'cypheus: (Windows) manage HylaFAX+' # Pretty old +# Too ad like... We'll leave them here for avid readers. + #'Winprint-HylaFAX-Reloaded: (Windows) print to fax' # http://nerdvittles.com/?p=738 Incredible Fax: Free Faxing Returns to Incredible PBX 1.8 + #'WinPrint-Hylafax-for-Windows: (Windows) print to fax' + #'Hylafax-support: iFax Solutions can help configure your fax system' +) +# 'sambafax' +# 'gfax: fax from Gnome (X)' + +# The HylaFAX binaries work very well. The scripts need major fixes! +# HylaFAX+ is pretty much completely broken for any Linux install, +# and some parts are broken for other Unix too. The original HylaFAX +# is even more broken. I scanned some other package builds: +# [x] dpkg .deb: Debian, Ubuntu +# [x] RPM/YUM spec: RHEL, Redhat, SUSE, CentOS, Fedora, Yellow Dog +# [x] Slackbuild tgz: Slackware +# [x] Pacman PKGBUILD: Arch Linux +# [x] Portage ebuild: Gentoo, Sabayon +# [ ] Ports: FreeBSD +# These have a few well chosen ./configure options but no substantial sed hacks +# of any kind. I'm wondering how anyone gets HylaFAX running. +# HylaFAX was designed to be an easy install, +# and with a little sedery, it can be again. +# -CJS + +# Note: I only send faxes. Fax receiving might need a bunch more patches. + +_pkginit() { + if [ "${SOURCEONLY:-0}" -ne 0 ]; then # see makepkg -S if this var changes + if [ "${_opt_FAXNumber}" != '+1.517.555.0001' -o "${_opt_LocalIdentifier}" != 'ArchLinuxFAX' ]; then + echo 'Our fax info must be removed from the PKGBUILD' 1>&2 + echo 'to produce a source package.' 1>&2 + exit 1 + fi + fi +} +_pkginit + +build() { + set -u + cd "${srcdir}/${_pkgnick}-${pkgver}" + + # sbin is deprecated and should not be used. We'll obliterate + # all uses of /sbin. Some /sbin not applicable to our OS are left alone. + sed -i -e 's:^\(DIR_SBIN=/usr/local/\)sbin$:\1bin:g' \ + -e 's|:/sbin:\($PATH\)|:\1|g' \ + -e 's|\(findApp [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ + -e 's|\(findAppDef [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ + -e 's|^\(PATH=$PATH:/bin:/usr/bin\)\(:/etc\)$|\1 # \2 # it was an insanely stupid choice for some UNIX systems to put /etc in the path!|g' \ + -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ + -e 's:^#!/bin/sh$:#!/usr/bin/dash:g' \ + 'configure' + + # Eliminate all uses of /bin/sh which on Arch Linux is bash. configure gets + # some of them. dash is partly for performance on high volume fax servers + # and partly to ensure my changes to scripts conform to strict POSIX. + # Upstream is more likely to accept the patches if they don't need to + # remove bashishms. + sed -i -e 's:^#! */bin/sh$:#!/usr/bin/dash:g' \ + 'config.'{guess,sub} faxmail/mailfax.sh* dist/new* + sed -i -e 's:execl("/bin/sh":execl("/usr/bin/dash":g' \ + faxd/{faxApp.c++,faxGettyApp.c++} + + # apply PKGBUILD defaults to default etc/skel for hands free multi modem setup + sed -i -e 's/^\(AreaCode:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_AreaCode}\2/g" \ + -e 's/^\(FAXNumber:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_FAXNumber}\2/g" \ + -e 's/^\(LocalIdentifier:\s\+\)[^#\t]\+\(.*\)$'"/\1\"${_opt_LocalIdentifier}\"\2/g" \ + -e 's/^\(RingsBeforeAnswer:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_RingsBeforeAnswer}\2/g" \ + 'config/skel' + + sed -i -e '# More sbin fixes' \ + -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ + -e "# Add crude systemd support. faxmodem init on boot is still missing but I'm using faxgetty so I don't care" \ + -e 's/^\(DIR_SYSVINIT\)=@SYSVINITDIR@$/\1="systemd"/g' \ + -e 's:^\(\s\+\)if \[ -f ${DIR_SYSVINIT}/hylafax \]; then$:\1ishylaInit ()\n\1{\n\1if [ "${DIR_SYSVINIT}" = "systemd" ]; then\n\1 systemctl -q is-active hfaxd.service\n\1else\n\1 [ -f ${DIR_SYSVINIT}/hylafax ]\n\1fi\n\1}\n\n\1if ishylaInit; then:g' \ + -e 's/^\(\s\+\)\(if kill $HFAXD; then\)$/\1if [ "${DIR_SYSVINIT}" = "systemd" ]; then\n\1 systemctl stop hfaxd.service\n\1el\2/g' \ + -e 's:^\(\s\+\)\($DIR_SBIN/faxquit >/dev/null 2>&1\)$:\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 systemctl stop faxq.service\n\1else\n\1 \2\n\1fi:g' \ + -e 's/^\( \)\(kill $HFAXD\)$/\1\2 (SysV)\nor\n\1systemctl stop hfaxd.service (systemd)\n/g' \ + -e 's:^\(\s\+\)\(if \[ -x ${DIR_SYSVINIT}/hylafax \]; then\)$:\1# The systemd code does not adequately duplicate the functionality of SysV\n\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 if isOK "$FAXQ_SERVER"; then systemctl start faxq.service; fi\n\1 if isOK "$HFAXD_SNPP_SERVER"; then\n\1 sed -i -e '"'"'s|^\\(ExecStart=/usr/bin/hfaxd -i hylafax\\)\\(.*\\)$|\\1 -s snpp|g'"'"' /usr/lib/systemd/system/hfaxd.service\n\1 else\n\1 sed -i -e '"'"'s|^\\(ExecStart=/usr/bin/hfaxd -i hylafax\\)\\(.*\\)$|\\1|g'"'"' /usr/lib/systemd/system/hfaxd.service\n\1 fi\n\1 systemctl daemon-reload\n\1 if isOK "$HFAXD_SERVER"; then systemctl start hfaxd.service; fi\n\1el\2:g' \ + -e '# Fix FAXD= typo' \ + -e 's:^\(\s\+\)\(FAXD="`findproc hfaxd`"\)$:\1H\2:g' \ + -e "# Remove ' for mcedit syntax highlighter" \ + -e 's:\([dD]on\)'"'"'t:\1t:g' \ + -e "# This would have been easier to fix if the error wasn't hidden" \ + -e 's:^\(\s\+\)\($DIR_SBIN/faxmodem $devid\)\( >/dev/null 2>&1\)$:\1\2 #\3 # Hiding these errors is counter productive!:g' \ + -e '# Fix LN for anyone who has LN in their environment' \ + -e 's:^\(LN=\):unset LN\n\1:g' \ + -e '# vgetty and egetty are not readily available on Arch Linux so kill the warning.' \ + -e '# Supress warning: /bin/vgetty does not exist or is not an executable program!' \ + -e '# Supress warning: /bin/egetty does not exist or is not an executable program!' \ + -e 's|^\(\s\+\)\(test -x $PATH_\)\([VE]GETTY\)\(.\+\)$|\1echo "\3 not available for Arch Linux" # \2\3\4 # http://www.hylafax.org/site2/HylaFAQ/Q360.html Q360: The truth about egetty/vgetty|g' \ + -e '# The gsfonts are likely to never be again placed in this folder.' \ + -e '# Why does gs report the folder in the search path?' \ + -e '# Supress warning: /usr/share/ghostscript/fonts does not exist or is not a directory!' \ + -e 's|^\(\s\+\)\(if \[ -d $FDIR \]; then\)$|\1if [ ! -d "$FDIR" -a "$FDIR" = "/usr/share/ghostscript/fonts" ]; then\n\1 echo -n ""\n\1el\2|g' \ + -e '# Branding' \ + -e 's|^\(Note "Setup program for HylaFAX (tm) $VERSION\)."$|\1-Arch Linux."|g' \ + -e '# Improve display for 25 line screens. I skipped one that would take too much regex to get.' \ + -e 's|^\(\t\t\)\(Note ""\)$|\1# \2|g' \ + -e 's|^\(\t \)\(Note ""\)$|\1# \2|g' \ + -e '# Fix genfontmap output to get rid of glyph metric error.' \ + -e 's:\($DIR_SPOOL/bin/genfontmap.ps\) \(> $DIR_SPOOL/etc/Fontmap.HylaFAX\):\1 | $DIR_SPOOL/bin/fmfix.pl \2:g' \ + -e '# Fix some typos. Clarify SNPP.' \ + -e 's|\(\[2\] Init script starts hfaxd\)|\1:|g' \ + -e 's|\(\[3\] Start paging protocol\):\t|\1 (SNPP):|g' \ + -e '# systemd handling of faxgetty. Using sed limits how nice I can make the hacks.' \ + -e 's|^\(\s\+\)\(echo $DIR_SBIN/faxquit $devid\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 systemctl enable "faxgetty@$devid.service"\n\1 systemctl restart "faxgetty@$devid.service"\n\1else\n\1 \2|g' \ + -e 's|^\(\s\+\)\($DIR_SBIN/faxquit $devid >/dev/null 2>&1\)$|\1 \2\n\1fi|g' \ + -e 's|^\(\s\+\)\(if \[ -f /etc/inittab \]; then\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 FAXGETTY="`cd /etc/systemd/system/multi-user.target.wants; echo faxgetty@*.service`"; test "$FAXGETTY" = "faxgetty@*.service" \&\& unset FAXGETTY\n\1el\2|g' \ + -e 's|^\(\s\+\)\(if \[ "$init" \]; then\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 for x in $DEVS; do\n\1 devid="`expr $x : '"'"'config.\\(.*\\)'"'"'`"\n\1 if [ -w $DIR_SPOOL/FIFO.$devid ]; then\n\1 systemctl enable "faxgetty@$devid.service"\n\1 systemctl restart "faxgetty@$devid.service"\n\1 fi\n\1 done\n\1el\2|g' \ + -e '# Remove /etc from path' \ + -e 's|^\(PATH\)=.\+$|\1=/usr/bin:/usr/local/sbin|g' \ + -e '# Apply default area code for easier setup' \ + -e 's|^\(AREACODE\)=.\+$'"|\1=${_opt_AreaCode}|g" \ + 'etc/faxsetup.sh.in' + + # Var $TTY clashes with the Arch Linux environment and likely all other Linux + # too. $TTY contains the terminal device from `tty`. With this already set + # to a known valid terminal, faxaddmodem never asks for a modem device and + # immedately tests the terminal for a modem. We haven't used modems for + # terminals for a long time and even when we did, you can't test a modem + # while it's "off hook" actively running a terminal. This bug blocks the + # to add modems interactively by running faxaddmodem or faxsetup leaving + # big hole of complexity in setting up HylaFAX+. + # Until we fix this, automatic modem setup in faxsetup must be skipped. + # Modems can only be added with "faxaddmodem ttyUSB0". Then you need to run + # faxsetup again to start all the modems. + + # We change TTY -> MDMTTY instead of -> TTYMDM to prevent sed recursive replace. + + # "faxaddmodem /dev/ttyUSB0" adds the device as "config._dev_ttyUSB0". This + # would be clever if the scripts could handle this, but they can't. We'll trim + # /dev/ off so the scripts work. It is too much to ask installing admins to + # remember to leave /dev/ off when no screens specify such. If the device + # is outside of /dev/ then we leave the folder intact resulting in a device + # like "config._proc_stuff". I'm certain this won't work but + # until someone finds a use for a device outside of /dev + # this set of bugs will stay the way they are. + # Fix bugs in /dev/tty* handling. Make faxaddmodem /dev/ttyUSB0 behave the + # same as faxaddmodem ttyUSB0. + # With all these bugs fixed you can install HylaFAX+ the way it was + # originally designed, and it's not very hard. + sed -s -i -e 's:$TTY\>:$MDMTTY:g' \ + -e 's:\<TTY=:MDMTTY=:g' \ + -e 's:\<read TTY\>:read MDMTTY:g' \ + -e 's:^\(DEVPATH="/dev/"\)$:\1\ncleanMDM () {\n if [ "$1" = "`dirname "$2"`/" ]; then\n MDMTTY="`basename $2`"\n else\n MDMTTY="$2"\n fi\n case "$MDMTTY" in\n /*)SHOWTTY="$MDMTTY";;\n "")SHOWTTY=;;\n *)SHOWTTY="$1$MDMTTY";;\n esac\n}\ncleanMDM "$DEVPATH" "$MDMTTY"\n:g' \ + -e 's?^\(\s\+\)\(prompt "Serial port that modem is connected to .\+\)$?\1echo ""\n\1echo "Leave /dev off if your device is in /dev"\n\1echo "Examples: ttyUSB0, ttyACM0, ttyS0"\n\1\2\n\1test "$MDMTTY" || (cd /dev; ls tty[^0-9]*)\n\1cleanMDM "$DEVPATH" "$MDMTTY"?g' \ + -e 's?$DEVPATH$MDMTTY?$SHOWTTY?g' \ + etc/{faxaddmodem,probemodem}.sh.in + # It is not necessary to add faster baud rates to the 2 modem scripts. + # 38400 is only the speed at which the script will test the modem. + # The modem config will set the proper speed during use. + + # quick grammar error fix + sed -i -e 's:^a \(modem device \):\1:g' 'man/ondelay.1m' + + #exit 1 + unset LN # On my system this has something in it. The script should + # probably be fixed to prefix _var_ on all variables. Like TTY in Linux, + # given enough systems and enough time eventually a variable conflict will + # occur. Prefixing should prevent this. The idea is to pick a prefix so obtuse + # that no sane person would ever pick it. What does that make us? + if [ ! -s 'Makefile' ]; then + ./configure --nointeractive --with-OPTIMIZER="${CFLAGS}" \ + --target="${CARCH}-arch-linux" \ + --nointeractive \ + --with-DIR_BIN='/usr/bin' \ + --with-DIR_LIB='/usr/lib' \ + --with-DIR_LIBDATA='/usr/lib/fax' \ + --with-DIR_LIBEXEC='/usr/bin' \ + --with-DIR_MAN='/usr/share/man' \ + --with-DIR_SBIN='/usr/bin' \ + --with-SYSVINIT='no' \ + --with-PAGESIZE="${_opt_pagesize}" \ + --with-SCRIPT_SH='/usr/bin/dash' + fi + +# --with-PATH_AFM='/usr/share/fonts/Type1' gs ignores this + + # unknown isn't good enough for me. Let's brand! + # We don't brand any of the build files which just get deleted anyways. + #sed -s -i -e 's:-unknown-linux-:-arch-linux-:g' \ + # etc/{faxaddmodem,probemodem,faxsetup}.sh + # This crude branding was eliminated by the configure option above. + + # A patch from the Gentoo hylafaxplus ebuild. hostname -f produces a useless result on my system + # sed -i -e "s:hostname:hostname -f:g" util/{faxrcvd,pollrcvd}.sh.in + # More patches from the Gentoo hylafaxplus ebuild + # Respect LDFLAGS(at least partially) + # sed -i -e "/^LDFLAGS/s/LDOPTS}/LDOPTS} ${LDFLAGS}/" defs.in + # sed -i -e "s|-fpic|-fPIC|g" configure + + # A serious error that needs a bit more explanation before somebody gets fired. + sed -s -i -e 's|\(emsg = fxStr::format("Unable to open scheduler FIFO: %s\)\(",\)$|\1 (try running faxsetup)\2|g' \ + 'hfaxd/FIFO.c++' + #exit 1 + make -s # -j $(nproc) # hylafax is not multi threaded make compatible + cd "${srcdir}/sendfaxvsi-1.0" + sh -u make.sh + set +u +} + +package() { + set -u + cd "${srcdir}/${_pkgnick}-${pkgver}" + make INSTALLROOT="${pkgdir}" install + + # My crude VSI-FAX tag support + install -D -m 755 "${srcdir}/sendfaxvsi-1.0/sendfaxvsi" "${pkgdir}/usr/bin/sendfaxvsi" + + # Thanks to mc I can see that these files have the wrong permissions. + chmod 644 "${pkgdir}/var/spool/hylafax/bin/"*.ps + + # Remove files that are not needed on Linux (from RPM .spec) + rm -f "${pkgdir}/usr/bin/"{faxsetup.irix,faxsetup.bsdi} + rm -f "${pkgdir}/usr/bin/"{ps2fax.imp,ps2fax.dps} + rm -f "${pkgdir}/usr/share/man/man1/sgi2fax.1" + + # Huge screwup! We don't want to lose this log file on every upgrade. + rm -f "${pkgdir}/var/spool/hylafax/etc/xferfaxlog" + + # Leaving this FIFO in the package makes it so that an accidental upgrade to + # a live production system immediately shuts down all fax traffic + # therby forcing the admin to quickly run faxsetup to restore operation, + # and that's only if the admin knows what to do because the errors on + # sendfax don't reveal much about the problem. +# 460 Failed to submit job 6: Unable to open scheduler FIFO: No such file or directory. + # See above for where we amend this error. + # Removing the FIFO ensures that the system will continue to run + # after an upgrade until it is convenient to run faxsetup to restart the + # daemons. Besides, the package doesn't create the FIFO correctly anyways. + rm -f "${pkgdir}/var/spool/hylafax/FIFO" || : + + # My fixer tool to get rid of the glyph metrics warning. Look above for where sed hacks this in. + # Alternate solution: ftp://ftp.hylafax.org/contrib/fontmap/fontmap.pl + # Alternate solution: configure --with-AFM=no (seems supported only in HylaFAX, not HylaFAX+) + install -D -m 744 "${srcdir}/fmfix.pl" "${pkgdir}/var/spool/hylafax/bin" + # install -D -m 744 "${srcdir}/hylafax.cron.daily" "${pkgdir}/etc/cron.daily/hylafax" # all systemd now + + # Install user selected hosts. Duplicate Samba's technique of making + # foo.default as part of the package leaving foo to be user modified. + # foo.default is copied to foo during the first install and removed or + # upgraded automatically if same as original. + # This fixes many problems and enables a lot of functionality. + # * The Arch Linux Pacman file backup technique isn't friendly to reinstalls. + # * Whether and what user changes can be easily found with any diff tool. + # * You can start over with a new copy preserving only the crufty + # user mods you still want. + # * Related installers can add their own foo.superbar.default files without + # calously overwriting user mods preventing the problem where + # "Installing superbar will fubar your server" and the apps can be installed + # in any order. Diff can be used to determine which variant is in use + # and more diff can be used to switch user mods from one variant to another. + # * Installers can automatically remove or upgrade unchanged files. + # * Users are encouraged to make their own defaults like foo.central.default + # complete with their own installers. + # * Eventually this leads to the proper use where the master script sources + # bunches of addons to obtain the desired result. + # * When you see a .default file you know the related file is supposed to be + # modifed. + + local _outfile="${pkgdir}/var/spool/hylafax/etc/hosts.hfaxd.default" + mv "${pkgdir}/var/spool/hylafax/etc/hosts.hfaxd" "${_outfile}" + local _host_first=1 + for _host in ${_opt_hosts_hfaxd}; do + if [ "${_host_first}" -ne 0 ]; then + _host_first=0 + cat >> "${_outfile}" << EOF +# The .default of this file will always be overwritten by upgrades. Modify the non .default copies! +# The following hosts were added by an install option in the ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# http://aur.archlinux.org/ +EOF + fi + echo "${_host}" >> "${_outfile}" + done + + # More user customizable files from the Slackbuild + cd "${pkgdir}/var/spool/hylafax/etc" + for _outfile in dialrules* 'cover.templ' 'dpsprinter.ps'; do + mv "${_outfile}" "${_outfile}.default" + done + + cd "${srcdir}/${_pkgnick}-${pkgver}" + # Extended name .default for these files allowing AvantFAX and others + # to Install their own versions. + for _outfile in 'archive' 'faxrcvd' 'notify' 'pollrcvd'; do + mv "${pkgdir}/var/spool/hylafax/bin/${_outfile}" "${pkgdir}/var/spool/hylafax/bin/${_outfile}.hylafaxplus.default" + done + + # add systemd files + install -D -m644 "${srcdir}/hfaxd.service" "${pkgdir}/usr/lib/systemd/system/hfaxd.service" + install -D -m644 "${srcdir}/faxq.service" "${pkgdir}/usr/lib/systemd/system/faxq.service" + install -D -m644 "${srcdir}/faxgetty@.service" "${pkgdir}/usr/lib/systemd/system/faxgetty@.service" + install -D -m644 'COPYRIGHT' "${pkgdir}/usr/share/licenses/${_pkgnick}/COPYRIGHT" + # systemd timer (from the HylaFAX PKGBUILD). No need to install cron. This should be split into two timers. + install -D -m644 "${srcdir}/hylafax.timer" "${pkgdir}/usr/lib/systemd/system/hylafax.timer" + # insert the selected maintenance time + sed -i -e 's/^\(OnCalendar\)=.\+$'"/\1=*-*-* ${_opt_MaintenanceTime}/g" "${pkgdir}/usr/lib/systemd/system/hylafax.timer" + install -D -m644 "${srcdir}/hylafax.service" "${pkgdir}/usr/lib/systemd/system/hylafax.service" + install -d -m755 "${pkgdir}/usr/lib/systemd/system/multi-user.target.wants" + # ln -s '../hylafax.timer' "${pkgdir}/usr/lib/systemd/system/multi-user.target.wants/hylafax.timer" # better done in install with systemctl enable + set +u +} +set +u diff --git a/faxgetty@.service b/faxgetty@.service new file mode 100644 index 000000000000..e025eb6f655b --- /dev/null +++ b/faxgetty@.service @@ -0,0 +1,23 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +[Unit] +Description=HylaFAX+ faxgetty on %i +Documentation=man:faxgetty(8) +After=faxq.service hfaxd.service + +[Service] +ExecStart=/usr/bin/faxgetty %i +Type=simple +Restart=always +RestartSec=0 +KillMode=process + +KillSignal=SIGTERM + +[Install] +WantedBy=multi-user.target diff --git a/faxq.service b/faxq.service new file mode 100644 index 000000000000..378aa25f8120 --- /dev/null +++ b/faxq.service @@ -0,0 +1,11 @@ +[Unit] +Description=HylaFAX+ queue manager +Documentation=man:faxq(8) + +[Service] +Type=forking +ExecStart=/usr/bin/faxq +ExecReload=/bin/kill -HUP $MAINPID + +[Install] +WantedBy=multi-user.target diff --git a/fmfix.pl b/fmfix.pl new file mode 100755 index 000000000000..c3571b412190 --- /dev/null +++ b/fmfix.pl @@ -0,0 +1,71 @@ +#!/usr/bin/perl +require 5.008; + +# fmfix.pl v1.0 + +# Copyright 2015 by Chris Severance aur.severach aATt spamgourmet dott com +# May be distributed under the terms of the GNU Public Licence, V2 or any later version. + +# For HylaFAX+, 2015/05/11 Chris Severance for Arch Linux + +# Usage: gs -q -sDEVICE=tiffg3 -sFONTPATH=/usr/share/fonts/Type1 /var/spool/hylafax/bin/genfontmap.ps | fmfix.pl > Fontmap.HylaFAX +# Note: gs requires a FONTPATH but completely ignores any fonts contained within. +# All you get is a lousy copy of /usr/share/ghostscript/0.00/Resource/Init/Fontmap.GS mangled by genfontmap.ps +# which could have been obtained much less obtusely with the likes of sed, awk, cut, expr, +# or a crufty perl script similar to this one. + +# gsfontmap.ps used to produce all lines with filenames: +# (Hershey-Script-Simplex-Bold) (hrscsb.gsf) ; +# but now for some fonts it just puts the name: +# (Courier) /NimbusMon-Reg ; +# figuring that gs will know how to find them. This totally borks HylaFAX+ TextFormat.c++ +# ability to find the associated .afm metrics file so you get an error: +# NimbusMon-Bol: No glyph metric table located... +# To fix this we quit using the new URWfonts which don't have metrics +# and use the old "35" gsfonts which do. They're already in the FONTPATH. +# To make HylaFAX use them specifically we sub in +# the filename instead of the new font name. This change only happens in +# a HylaFAX+ config file so other apps that use ghostscript are not affected. + +# Hack-n-slash our way through the "35" Type 1 font files to get the names. +# The .pfb files are of the form: +# 6 hex codes, mostly consistent but might contain a \n +# %!PS-AdobeFont-...: MyFontName ...\n + +use strict; +use warnings; +my $gsfolder="/usr/share/fonts/Type1"; # Arch Linux package 'gsfonts' +opendir(GSFONTS, $gsfolder) or die "Can't open directory: $!\n"; +my $liner; +my $file; +my %fontxlat; +while ($file = readdir(GSFONTS)) { + if ($file =~ m/[^.]+\.pfb/ ) { + open(FONT,"<",$gsfolder."/".$file) or die; + read (FONT, $liner,6, 0); + $liner = <FONT>; + if ( $liner =~ m/%!PS-AdobeFont[^:]+: ([^ ]+) /) { + #print "$file = $1\n" + $fontxlat{$1}=$file; + } + close(FONT); + } +} +closedir(GSFONTS); + +#open(FONTMAP,"<","Fontmap.HylaFAX") or die; + +# Convert all lines of the form +# (BoringFontName)\t/AnotherBoringFontName ; +# to +# (BoringFontName)\t(InterestingFileName.pfb) ; + +while($liner = <STDIN>) { + if ($liner =~ m:^[(]([^)]+)[)]\t/([^ ]+) ;: and $fontxlat{$2} ) { + print "($1)\t($fontxlat{$2}) ;\n"; # % fixed by HylaFAX+ $0! + } else { + print $liner; + } +} + +#close(FONTMAP); diff --git a/hfaxd.service b/hfaxd.service new file mode 100644 index 000000000000..31bd999b5152 --- /dev/null +++ b/hfaxd.service @@ -0,0 +1,11 @@ +[Unit] +Description=HylaFAX+ client-server protocol server +Documentation=man:hfaxd(8) + +[Service] +Type=forking +ExecStart=/usr/bin/hfaxd -i hylafax +ExecReload=/bin/kill -HUP $MAINPID + +[Install] +WantedBy=multi-user.target diff --git a/hylafax.cron.daily b/hylafax.cron.daily new file mode 100644 index 000000000000..49ea9af51efb --- /dev/null +++ b/hylafax.cron.daily @@ -0,0 +1,5 @@ +#!/bin/sh +# HylaFAX+ + +/usr/bin/faxqclean +/usr/bin/faxcron -rcv 30 diff --git a/hylafax.install b/hylafax.install new file mode 100644 index 000000000000..695c97bb1604 --- /dev/null +++ b/hylafax.install @@ -0,0 +1,87 @@ +_print_install() { + printf "\n" + echo "Run faxsetup to configure and be sure to set..." + echo " The device to configure is usually ttyS0, ttyUSB0, or ttyACM0" + echo " The number of pages to accept to more than 25" + echo " The country code and area code" + echo " The faxclass to 2.0" + echo " Most other defaults are OK" + printf "\n" +} + +_print_remove() { + printf "\n\n" + echo "You may manually remove /var/spool/hylafax and /usr/lib/fax if you do not need anything." + echo "You may also remove any aliases added to /etc/mail/aliases." + printf "\n" +} + +post_install() { + groupadd -g 14 'uucp' &>/dev/null + useradd -u 10 -g 'uucp' -d '/' -s '/bin/false' 'uucp' &>/dev/null + #useradd -u 69 -g 'daemon' -d '/' -s '/bin/false' 'fax' &>/dev/null + post_upgrade + usermod -d '/' 'uucp' &>/dev/null + #usermod -d '/' 'fax' &>/dev/null + _print_install + mandb -q +} + +# define _clean_or_copy_doit() to tell this what to do +_clean_or_copy() { + for _outfile in 'archive' 'faxrcvd' 'notify' 'pollrcvd'; do + _clean_or_copy_doit "/var/spool/hylafax/bin/${_outfile}.hylafaxplus.default" "/var/spool/hylafax/bin/${_outfile}" + done + for _outfile in /var/spool/hylafax/etc/*.default; do + _clean_or_copy_doit "${_outfile}" "`expr "${_outfile}" : '^\(.\+\).default$'`" + done +} + +post_upgrade() { + # Only some of the files and folders are chown uucp + chown 'uucp' '/var/spool/hylafax'/{,archive,bin,client,config,dev,docq,doneq,etc} + chown 'uucp' '/var/spool/hylafax'/{FIFO,info,log,pollq,recvq,sendq,status,tmp} + _clean_or_copy_doit() { + cp -np "$1" "$2" + chmod 'u+w' "$2" + } + _clean_or_copy + + cp -n /dev/null "/var/spool/hylafax/etc/xferfaxlog" # This doesn't modify the timestamp of an existing file + chown 'uucp:uucp' '/var/spool/hylafax/etc/'{hosts.hfaxd,lutRS18.pcf,xferfaxlog} + #chown -R uucp /var/spool/hylafax/etc/templates + systemctl daemon-reload + systemctl enable 'hylafax.timer' + systemctl start 'hylafax.timer' + if [ ! -z "`command -v 'avantfaxsetup.sh'`" ]; then + avantfaxsetup.sh 2 'install' + fi +} + +pre_upgrade() { + _clean_or_copy_doit() { + if [ "`md5sum < "$1"`" = "`md5sum < "$2"`" ]; then + rm -f "$2" + fi + } + _clean_or_copy +} + +pre_remove() { + pre_upgrade + userdel 'uucp' &>/dev/null + ##groupdel 'uucp' &>/dev/null + #userdel 'fax' &>/dev/null + # we could put this into pre_upgrade() but I'd rather let the admin restart when convenient. + systemctl stop 'hfaxd.service' + systemctl stop 'faxq.service' + systemctl stop 'faxgetty@*.service' + systemctl stop 'hylafax.timer' + #rm -f '/var/spool/hylafax/bin/'{pdf2fax,ps2fax} '/var/spool/hylafax/dev/null' + _print_remove +} + +post_remove() { + systemctl daemon-reload + mandb -q +} diff --git a/hylafax.service b/hylafax.service new file mode 100644 index 000000000000..97f58aa90381 --- /dev/null +++ b/hylafax.service @@ -0,0 +1,13 @@ +[Unit] +Description=HylaFAX+ daily fax queue cleanup and deletion of 30 days old faxes +Documentation=man:faxqclean(8) man:faxcron(8) + +[Service] +Type=oneshot +ExecStart=/usr/bin/faxqclean +ExecStart=/usr/bin/faxcron -rcv 30 +Nice=19 +IOSchedulingClass=best-effort +IOSchedulingPriority=7 +#User= +#Group= diff --git a/hylafax.timer b/hylafax.timer new file mode 100644 index 000000000000..796463acb2ce --- /dev/null +++ b/hylafax.timer @@ -0,0 +1,11 @@ +[Unit] +Description=HylaFAX+ daily fax queue cleanup and deletion of 30 days old faxes +Documentation=man:faxqclean(8) man:faxcron(8) + +[Timer] +OnCalendar=daily +AccuracySec=3h +Persistent=true + +[Install] +WantedBy=multi-user.target diff --git a/sendfaxvsi-1.0.tgz b/sendfaxvsi-1.0.tgz Binary files differnew file mode 100644 index 000000000000..38214bef11ae --- /dev/null +++ b/sendfaxvsi-1.0.tgz |