diff options
Diffstat (limited to 'PKGBUILD')
-rw-r--r-- | PKGBUILD | 609 |
1 files changed, 362 insertions, 247 deletions
@@ -1,6 +1,5 @@ # Maintainer: Chris Severance aur.severach aATt spamgourmet dott com # Contributor: vicks <aur-hylafaxplus@p.lalouisianaise.com> -# Category: daemons # Note: These TODO may not be things I'm planning to fix. Some of them are just # notes to be fixed by someone else who wants that functionality and warnings @@ -17,24 +16,39 @@ # WANT: faxstat how to show only the last n days, like tail? # WANT: a faxmovemodem: to rename or remove modem without shutting fax system down, compatible with faxmodem and faxgetty. -# TODO: Automatically fix font path in /usr/lib/fax/hyla.conf whenever ghostscript upgrades. -# TODO: Cover pages in PKGBUILD for ready made installs. # TODO: faxcron timer run as uucp. faxqclean must run as root. # TODO: find more optional dependencies +# TODO: Better default font. +# TODO: Fix faxd-makefile-bug on make install +# TODO: Improve systemd code now that it's out of sed and in patch -# Setup these parameters +# Setting these skel defaults will make adding modems easier. _opt_AreaCode="517" -_opt_FAXNumber="+1.517.555.0001" # Default: +1.517.555.0001 +_opt_FAXNumber="+1.517.555.0101" # Default: +1.517.555.0101 _opt_LocalIdentifier="ArchLinuxFAX" # Default: ArchLinuxFAX _opt_RingsBeforeAnswer="1" # set to 0 to make faxgetty send only + +# Configuration parameters + _opt_MaintenanceTime="06:10:00" # Cleanup will run every 12 hours starting at this time _opt_hosts_hfaxd="192.168.[0-9]+.[0-9]+" # Default "", hosts to add to hosts.hfaxd _opt_pagesize="Letter" # A4, Letter, Legal +# Recommended modems + +# http://hylafax.sourceforge.net/howto/intro.php#ss1.4 + +# Some fax documentation recommend against Ethernet serial servers +# because of the unpredictable delays inherent in Ethernet communication. + +# Most PCI, PCIe, and USB serial ports are supported. I'm using USB. +# USB is self powered, does not compete for high performance slots, +# and does not create the highly contested /dev/ttyS* or +# /dev/ttyUSB* nodes. + # How to install: -# Recommended build command: makepkg -scCfi # Before running faxsetup, let's see which daemons we want to run. # man faxq # used only if modems are present on this system @@ -48,7 +62,7 @@ _opt_pagesize="Letter" # A4, Letter, Legal # faxsetup will ask to run faxaddmodem only if there are no modems set up. # Answer yes if you like but you might as well answer no to # Do you want to run faxaddmodem to configure a modem [yes]? no -# because you'll need to run faxaddmodem anyways to add more modems. +# because you'll need to run faxaddmodem anyways to add more than one modem. # You can run with or without faxgetty # faxgetty makes your setup more reliable and easier to manage. @@ -58,8 +72,11 @@ _opt_pagesize="Letter" # A4, Letter, Legal # and enable/start your modems. # faxmodem systemd support is incomplete. Modems will not autostart on boot. +# What modems are configured? +# ls /var/spool/hylafax/etc/config.tty* + # sudo faxaddmodem -# Add as many modems as you like. See below for some untested high speed techniques. +# Add as many modems as you like. See below for some minimally high speed techniques. # Enable one of the modems with some of the following commands. @@ -76,109 +93,78 @@ _opt_pagesize="Letter" # A4, Letter, Legal # sudo faxsetup # HylaFAX recommends you run faxsetup to restart the servers after every -# upgrade. This PKGBUILD is programmed to not require this. You need to run -# faxsetup whenever ghostscript upgrades or the fonts won't be found. This -# needs to be fixed if anyone can figure out how. +# upgrade. This PKGBUILD is programmed to not require this. # Are the services running? # systemctl status faxq # systemctl status hfaxd -# systemctl list-units "faxgetty@*.service" -# systemctl list-timers +# systemctl list-units 'faxgetty@*.service' +# systemctl list-timers 'hylafax.timer' # Once you have a modem set up with phone line unplugged -# sendfax -n -d 5175551212 /etc/passwd +# sendfax -n -d 5175550113 /etc/passwd # Once you see that the modem is trying to send, let's see the job. -# faxstat -s +# faxstat -s # Let's delete that job (change the id as necessary) -# faxrm 1 +# faxrm 1 # Be patient. This can take a minute if the job is active on a modem in faxq. # Let's see what happened to that job. -# faxstat -sd +# faxstat -sd +# Try sending a real fax. +# sendfax -n -d 5175550113 file +# If this doesn't work you'll need to modify dial rules: +# man dialrules +# dialtest -a 517 '/var/spool/hylafax/etc/dialrules' +# http://www.hylafax.org/archive/2007-10/msg00152.php +# https://www.allareacodes.com/517 +# http://localcallingguide.com/ +# dialrules modifications apply immediately, no restarting necessary. + +# To remove SGI logo and add your own see +# /var/spool/hylafax/etc/cover.templ + # After you get a few real faxes sent, let's see how we're performing. -# xferfaxstats +# xferfaxstats # Let's see a log file -# less /var/spool/hylafax/etc/xferfaxlog +# less -S '/var/spool/hylafax/etc/xferfaxlog' # Avoid restarting the daemons manually with systemctl. Too many commands, and # too tricky. Use faxsetup to restart the daemons and enable the modems. # If the skel defaults are correct and prefab modem configs are available a # large number of modems could be automatically set up this way. -# cd /dev; for i in ttyUSB[1-3]; do faxaddmodem -nointeractive -s 38400 $i; done +# cd /dev; for i in ttyUSB[1-3]; do faxaddmodem -nointeractive -s 38400 $i; done -# Once the first one is set up, a fast, loose, and untested method for a very +# Once the first one is set up, a fast, loose, and minimally tested method for a very # large number of identical modems could work like this: -# cd /dev -# mdmlist=`echo ttyUSB* ttyS* ttya[a-m]*` # example 8 USB, 4 serial, 13*16=832 Digi PortServer (dgrp). +# cd '/dev' +# mdmlist=(ttyUSB* ttyS* ttya[a-m]*) # example 8 USB, 4 serial, 13*16=832 Digi PortServer (dgrp). # # This is ridiculous of course since there's no single computer with enough # # power to run 844 fax modems. -# cd /var/spool/hylafax -# for ttymdm in $mdmlist; do -# if [ "$ttymdm" != "ttyUSB0" ]; then -# cp -p /etc/config.ttyUSB0 /etc/config.$ttymdm -# mkfifo FIFO.$ttymdm -# # faxmodem $ttymdm -# systemctl enable faxgetty@$ttymodem.service -# systemctl start faxgetty@$ttymodem.service +# cd '/var/spool/hylafax' +# for ttymdm in "${mdmlist[@]}"; do +# if [ "${ttymdm}" != 'ttyUSB0' ]; then +# cp -p 'etc/config.ttyUSB0' "etc/config.${ttymdm}" +# mkfifo "FIFO.${ttymdm}" +# chmod 600 "${ttymdm}" +# chown 'uucp:uucp' "${ttymdm}" +# # faxmodem "${ttymdm}" +# systemctl enable "faxgetty@${ttymdm}.service" +# systemctl start "faxgetty@${ttymdm}.service" # fi # done # Helpful guides # Arch Wiki: https://wiki.archlinux.org/index.php/Hylafax # Debian Wiki: https://wiki.debian.org/HylaFax -# Gentoo Wiki: http://www.gentoo-wiki.info/HylaFAX +# Gentoo Wiki: http://www.gentoo-wiki.info/HylaFAX (defunct) # Univention Wiki: http://wiki.univention.com/index.php?title=HylaFAX_setup # HylaFAX user contributions: ftp://ftp.hylafax.org/contrib/ +# http://aplawrence.com/Linux/hylafax-scripts.html # VGETTY: http://www.cril.ch/anciens_projets.html.html#vgetty_voice_mail_and_extensions Vgetty Documentation Center # VGETTY: http://alpha.greenie.net/vgetty/ -# Linux modem support is troublesome. Serial based products all create ttys -# which requires them to be kernel modules. Linux changes the kernel interface -# constantly for peak functionality and performance. This means that many -# modem products work for a while then quit working as of a certain kernel -# version. Manufacturers much prefer Windows where driver compatibility is -# maintained over many versions rather than going back to revise the driver -# each time the Linux kernel devs change something. Arch Linux as a rolling -# release is on the front lines of this constant change. Modems are a -# declining market so manufacturers have little interest in continuously -# revising drivers. The solution for us is to stick to interfaces that are -# actively maintained either by the manufacturers or by the Linux kernel devs. - -# Here are the ones that continue to work even on the latest kernels. I'm only -# listing brands with 2 or more ports and modems I've tried. Multi port serial -# products is sorted by number of lights. I'm only listing products similar -# to those I've tried. There may be other well supported products. - -# Ethernet serial: Digi PortServer dgrp -# Note: Some fax documentation recommend against Ethernet serial servers -# because of the unpredictable delays inherent in Ethernet communication. -# I don't see any other way to support hundreds of modems. -# FTDI USB Serial 2: VSCOM -# FTDI USB Serial 2: Perle Ultraport -# FTDI USB Serial 2: Sewell -# FTDI USB Serial 2: BrainBoxes US -# FTDI USB Serial 2: B&B Electronics ULINX -# FTDI USB Serial 2: Startech -# FTDI USB Serial 2: SIIG -# FTDI USB Serial 2: SerialGear -# FTDI USB Serial 2: EasySYNC -# FTDI USB Serial 2: Shentek -# FTDI USB Serial 1: SeaLevel SeaLINK -# FTDI USB Serial 0: Digi Edgeport -# FTDI USB Serial 0: Comtrol RocketPort -# FTDI USB Serial 0: Hightek HK -# ACM USB Serial: Zyxel Multitech MT5634ZBA-USB-V.92-AV -# (This modem is properly supported by usbserial & udev in Linux 4.0+. You -# don't need the mknod instructions found at the Multitech web site.) - -# I prefer USB over PCI, PCIe, or Ethernet. Ethernet has timing issues. -# No reason to compete for a limited number of high performance PCIe slots -# with low performance serial devices. ISA, EISA, VESA, PCI, PCIe are all -# temporary technologies that will be replaced eventually. USB will last -# essentially forever with no changes. - # For an interesting discussion of Hylafax vs Hylafax+ vs vsi-fax see: # http://lists.opensuse.org/opensuse/2009-09/msg00269.html # Re: [opensuse] Update Hylafax 4.4 to 6.03 with src.rpm on OpenSuSE 10.3 @@ -187,12 +173,13 @@ set -u pkgname='hylafaxplus' _pkgnick='hylafax' pkgver='5.5.9' -pkgrel='1' +pkgrel='2' +_sendfaxvsicommit='18fabc74490362cd26690331d546d727c727db25' pkgdesc='Enterprise Fax Server' arch=('i686' 'x86_64') url='http://hylafax.sourceforge.net/' -license=('custom:SGI') -depends=('dash' 'libtiff' 'pam' 'ghostscript' 'gsfonts' 'sharutils' 'jbigkit' 'lcms2' 'smtp-server') # 'cron' +license=('custom') +depends=('dash' 'libtiff' 'pam' 'ghostscript' 'sharutils' 'jbigkit' 'lcms2' 'smtp-server' 'gsfonts-type1') # 'cron' # BASE64 is the default so HylaFAX+ doesn't need uuencode but I put it in anyways to placate configure and the bin finder in faxsetup! optdepends=('avantfax: manage HylaFAX+ through web browser' #'HERMESfax: manage HylaFAX+ through web browser' # Way too old @@ -201,35 +188,37 @@ optdepends=('avantfax: manage HylaFAX+ through web browser' 'faxfrontend: CUPS fax printer' # https://www.vitki.net/book/page/integrating-hylafax-cups '2Fax: ascii to fax generator including pictures and fonts' # http://www.atbas.org/2fax/ascii.php #'cypheus: (Windows) manage HylaFAX+' # Pretty old -# Too ad like... We'll leave them here for avid readers. +# Too ad like and will show in red as not found packages... We'll leave them here for avid readers. #'Winprint-HylaFAX-Reloaded: (Windows) print to fax' # http://nerdvittles.com/?p=738 Incredible Fax: Free Faxing Returns to Incredible PBX 1.8 #'WinPrint-Hylafax-for-Windows: (Windows) print to fax' #'Hylafax-support: iFax Solutions can help configure your fax system' +# 'sambafax' +# 'gfax: fax from Gnome (X)' ) -provides=('hylafax') +provides=("hylafax=${pkgver}") conflicts=('hylafax') # backup=(var/spool/hylafax/bin/{faxrcvd,notify}) -install='hylafax.install' +install="${_pkgnick}.install" # 'var/spool/hylafax/etc/hosts.hfaxd') # This is better handled with a .default file. _verwatch=("${url}" 'news/\([0-9\.]\+\)\.php' 'l') -source=("https://downloads.sourceforge.net/hylafax/${_pkgnick}-${pkgver}.tar.gz" - hylafax.{timer,service} - 'fmfix.pl' - 'faxq.service' - 'hfaxd.service' - 'faxgetty@.service' - 'sendfaxvsi-1.0.tgz') +source=( + "https://downloads.sourceforge.net/hylafax/${_pkgnick}-${pkgver}.tar.gz" + "sendfaxvsi-1.0.0.tgz::https://github.com/severach/sendfaxvsi/archive/${_sendfaxvsicommit}.tar.gz" + 'fmfix.pl' + 'localnxxtoregex.sh' + '0001-dialrules.7-10.digits.USA.patch' + '0002-typerules.vertical.margins.patch' + '0003-graphic.logo.instructions.patch' + '0004-hylafaxplus-systemd.patch' +) sha256sums=('22e6b98ae008a37b44136b4d08c85bdc2ef8f90629de424e06ec308063a47e30' - 'ad13d5171f5a8eb55a5773fc429dcef8418db90a8742cec18484534e86198da8' - '7b481d783f3c18303acd7d650321313302401e780616dce1f80b71a210bb58cf' - 'cff7250310dd278554be61ca25539a9ee6da663e14562bdbc9914df4527ff14b' - '55505ff501e36281aa2b9c85fe0609d9cd04428a4b6d36e2754919411b615d2d' - 'be96cf8c5fc14fde96c7d37dc9ba2e604aeebe57ce8d5c95dd7567d7e794f3b0' - '3f4cddd872be106041ecc460b7d738a5612668f447c783d5c9e71d9c1b7f62bb' - 'e80c6ffcb5f48bc1bf746b12d40abb94fe5ae79558edfad9c509ade6778cf2cf') -# 'sambafax' -# 'gfax: fax from Gnome (X)' - + '0aed186ab30fdb7cf36895a0ff50b03bd4a68db63cf4f19763995dabd9caffb0' + '613140010f9373998b441eaf7408b59877d00e1f4edb379740d27ccb93250272' + '80d2e28ee7a7d8f93501e32c96e9895e242409da1326761d36dbf28e5a0e3677' + 'dd4728f8204d0bba2a026768f0e0216778ed26583c3f799f6266554e21b48fe2' + '0a24bee3159a74440a00783c5da1ee2a5e529e46a26a9a91b6be72a5167f40f3' + 'b4b93c149164ed7c96f4f04373c32198c1e19c89ca9e2ab6e92e17c0a48bd1af' + '989d6f71a8cfe99a3ca983981f8d8e9368776e2fc7667a809755d8d7292d52ad') # The HylaFAX binaries work very well. The scripts need major fixes! # HylaFAX+ is pretty much completely broken for any Linux install, # and some parts are broken for other Unix too. The original HylaFAX @@ -250,7 +239,7 @@ sha256sums=('22e6b98ae008a37b44136b4d08c85bdc2ef8f90629de424e06ec308063a47e30' _pkginit() { if [ "${SOURCEONLY:-0}" -ne 0 ]; then # see makepkg -S if this var changes - if [ "${_opt_FAXNumber}" != '+1.517.555.0001' -o "${_opt_LocalIdentifier}" != 'ArchLinuxFAX' ]; then + if [ "${_opt_FAXNumber}" != '+1.517.555.0113' ] || [ "${_opt_LocalIdentifier}" != 'ArchLinuxFAX' ]; then echo 'Our fax info must be removed from the PKGBUILD' 1>&2 echo 'to produce a source package.' 1>&2 exit 1 @@ -258,84 +247,66 @@ _pkginit() { fi } _pkginit +unset -f _pkginit prepare() { set -u - cd "${srcdir}/${_pkgnick}-${pkgver}" + cd "${_pkgnick}-${pkgver}" # sbin is deprecated and should not be used. We'll obliterate # all uses of /sbin. Some /sbin not applicable to our OS are left alone. - sed -i -e 's:^\(DIR_SBIN=/usr/local/\)sbin$:\1bin:g' \ - -e 's|:/sbin:\($PATH\)|:\1|g' \ - -e 's|\(findApp [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ - -e 's|\(findAppDef [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ - -e 's|^\(PATH=$PATH:/bin:/usr/bin\)\(:/etc\)$|\1 # \2 # it was an insanely stupid choice for some UNIX systems to put /etc in the path!|g' \ - -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ - -e 's:^#!/bin/sh$:#!/usr/bin/dash:g' \ - 'configure' + sed -e 's:^\(DIR_SBIN=/usr/local/\)sbin$:\1bin:g' \ + -e 's|:/sbin:\($PATH\)|:\1|g' \ + -e 's|\(findApp [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ + -e 's|\(findAppDef [^ ]\+ \)/sbin:\($PATH\)|\1\2|g' \ + -e 's|^\(PATH=$PATH:/bin:/usr/bin\)\(:/etc\)$|\1 # \2 # it was an insanely stupid choice for some UNIX systems to put /etc in the path!|g' \ + -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ + -e 's:^#!/bin/sh$:#!/usr/bin/dash:g' \ + -i 'configure' # Eliminate all uses of /bin/sh which on Arch Linux is bash. configure gets # some of them. dash is partly for performance on high volume fax servers # and partly to ensure my changes to scripts conform to strict POSIX. # Upstream is more likely to accept the patches if they don't need to # remove bashishms. - sed -i -e 's:^#! */bin/sh$:#!/usr/bin/dash:g' \ - 'config.'{guess,sub} faxmail/mailfax.sh* dist/new* - sed -i -e 's:execl("/bin/sh":execl("/usr/bin/dash":g' \ - faxd/{faxApp.c++,faxGettyApp.c++} - - # apply PKGBUILD defaults to default etc/skel for hands free multi modem setup - sed -i -e 's/^\(AreaCode:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_AreaCode}\2/g" \ - -e 's/^\(FAXNumber:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_FAXNumber}\2/g" \ - -e 's/^\(LocalIdentifier:\s\+\)[^#\t]\+\(.*\)$'"/\1\"${_opt_LocalIdentifier}\"\2/g" \ - -e 's/^\(RingsBeforeAnswer:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_RingsBeforeAnswer}\2/g" \ - 'config/skel' - - sed -i -e '# More sbin fixes' \ - -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ - -e "# Add crude systemd support. faxmodem init on boot is still missing but I'm using faxgetty so I don't care" \ - -e 's/^\(DIR_SYSVINIT\)=@SYSVINITDIR@$/\1="systemd"/g' \ - -e 's:^\(\s\+\)if \[ -f ${DIR_SYSVINIT}/hylafax \]; then$:\1ishylaInit ()\n\1{\n\1if [ "${DIR_SYSVINIT}" = "systemd" ]; then\n\1 systemctl -q is-active hfaxd.service\n\1else\n\1 [ -f ${DIR_SYSVINIT}/hylafax ]\n\1fi\n\1}\n\n\1if ishylaInit; then:g' \ - -e 's/^\(\s\+\)\(if kill $HFAXD; then\)$/\1if [ "${DIR_SYSVINIT}" = "systemd" ]; then\n\1 systemctl stop hfaxd.service\n\1el\2/g' \ - -e 's:^\(\s\+\)\($DIR_SBIN/faxquit >/dev/null 2>&1\)$:\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 systemctl stop faxq.service\n\1else\n\1 \2\n\1fi:g' \ - -e 's/^\( \)\(kill $HFAXD\)$/\1\2 (SysV)\nor\n\1systemctl stop hfaxd.service (systemd)\n/g' \ - -e 's:^\(\s\+\)\(if \[ -x ${DIR_SYSVINIT}/hylafax \]; then\)$:\1# The systemd code does not adequately duplicate the functionality of SysV\n\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 if isOK "$FAXQ_SERVER"; then systemctl start faxq.service; fi\n\1 if isOK "$HFAXD_SNPP_SERVER"; then\n\1 sed -i -e '"'"'s|^\\(ExecStart=/usr/bin/hfaxd -i hylafax\\)\\(.*\\)$|\\1 -s snpp|g'"'"' /usr/lib/systemd/system/hfaxd.service\n\1 else\n\1 sed -i -e '"'"'s|^\\(ExecStart=/usr/bin/hfaxd -i hylafax\\)\\(.*\\)$|\\1|g'"'"' /usr/lib/systemd/system/hfaxd.service\n\1 fi\n\1 systemctl daemon-reload\n\1 if isOK "$HFAXD_SERVER"; then systemctl start hfaxd.service; fi\n\1el\2:g' \ - -e '# Fix FAXD= typo' \ - -e 's:^\(\s\+\)\(FAXD="`findproc hfaxd`"\)$:\1H\2:g' \ - -e "# Remove ' for mcedit syntax highlighter" \ - -e 's:\([dD]on\)'"'"'t:\1t:g' \ - -e "# This would have been easier to fix if the error wasn't hidden" \ - -e 's:^\(\s\+\)\($DIR_SBIN/faxmodem $devid\)\( >/dev/null 2>&1\)$:\1\2 #\3 # Hiding these errors is counter productive!:g' \ - -e '# Fix LN for anyone who has LN in their environment' \ - -e 's:^\(LN=\):unset LN\n\1:g' \ - -e '# vgetty and egetty are not readily available on Arch Linux so kill the warning.' \ - -e '# Supress warning: /bin/vgetty does not exist or is not an executable program!' \ - -e '# Supress warning: /bin/egetty does not exist or is not an executable program!' \ - -e 's|^\(\s\+\)\(test -x $PATH_\)\([VE]GETTY\)\(.\+\)$|\1echo "\3 not available for Arch Linux" # \2\3\4 # http://www.hylafax.org/site2/HylaFAQ/Q360.html Q360: The truth about egetty/vgetty|g' \ - -e '# The gsfonts are likely to never be again placed in this folder.' \ - -e '# Why does gs report the folder in the search path?' \ - -e '# Supress warning: /usr/share/ghostscript/fonts does not exist or is not a directory!' \ - -e 's|^\(\s\+\)\(if \[ -d $FDIR \]; then\)$|\1if [ ! -d "$FDIR" -a "$FDIR" = "/usr/share/ghostscript/fonts" ]; then\n\1 echo -n ""\n\1el\2|g' \ - -e '# Branding' \ - -e 's|^\(Note "Setup program for HylaFAX (tm) $VERSION\)."$|\1-Arch Linux."|g' \ - -e '# Improve display for 25 line screens. I skipped one that would take too much regex to get.' \ - -e 's|^\(\t\t\)\(Note ""\)$|\1# \2|g' \ - -e 's|^\(\t \)\(Note ""\)$|\1# \2|g' \ - -e '# Fix genfontmap output to get rid of glyph metric error.' \ - -e 's:\($DIR_SPOOL/bin/genfontmap.ps\) \(> $DIR_SPOOL/etc/Fontmap.HylaFAX\):\1 | $DIR_SPOOL/bin/fmfix.pl \2:g' \ - -e '# Fix some typos. Clarify SNPP.' \ - -e 's|\(\[2\] Init script starts hfaxd\)|\1:|g' \ - -e 's|\(\[3\] Start paging protocol\):\t|\1 (SNPP):|g' \ - -e '# systemd handling of faxgetty. Using sed limits how nice I can make the hacks.' \ - -e 's|^\(\s\+\)\(echo $DIR_SBIN/faxquit $devid\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 systemctl enable "faxgetty@$devid.service"\n\1 systemctl restart "faxgetty@$devid.service"\n\1else\n\1 \2|g' \ - -e 's|^\(\s\+\)\($DIR_SBIN/faxquit $devid >/dev/null 2>&1\)$|\1 \2\n\1fi|g' \ - -e 's|^\(\s\+\)\(if \[ -f /etc/inittab \]; then\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 FAXGETTY="`cd /etc/systemd/system/multi-user.target.wants; echo faxgetty@*.service`"; test "$FAXGETTY" = "faxgetty@*.service" \&\& unset FAXGETTY\n\1el\2|g' \ - -e 's|^\(\s\+\)\(if \[ "$init" \]; then\)$|\1if [ "$DIR_SYSVINIT" = "systemd" ]; then\n\1 for x in $DEVS; do\n\1 devid="`expr $x : '"'"'config.\\(.*\\)'"'"'`"\n\1 if [ -w $DIR_SPOOL/FIFO.$devid ]; then\n\1 systemctl enable "faxgetty@$devid.service"\n\1 systemctl restart "faxgetty@$devid.service"\n\1 fi\n\1 done\n\1el\2|g' \ - -e '# Remove /etc from path' \ - -e 's|^\(PATH\)=.\+$|\1=/usr/bin:/usr/local/sbin|g' \ - -e '# Apply default area code for easier setup' \ - -e 's|^\(AREACODE\)=.\+$'"|\1=${_opt_AreaCode}|g" \ - 'etc/faxsetup.sh.in' + sed -e 's:^#! */bin/sh$:#!/usr/bin/dash:g' -i 'config.'{guess,sub} faxmail/mailfax.sh* dist/new* + sed -e 's:execl("/bin/sh":execl("/usr/bin/dash":g' -i faxd/{faxApp.c++,faxGettyApp.c++} + + #cp -p 'etc/faxsetup.sh.in'{,.Arch} + # diff -pNau5 'etc/faxsetup.sh.in'{.Arch,} > '0004-hylafaxplus-systemd.patch' + patch -Nup0 < "${srcdir}/0004-hylafaxplus-systemd.patch" + + sed -e '# Fix FAXD= typo' \ + -e 's:^\(\s\+\)\(FAXD="`findproc hfaxd`"\)$:\1H\2:g' \ + -e "# Remove ' for mcedit syntax highlighter" \ + -e 's:\([dD]on\)'"'"'t:\1t:g' \ + -e "# This would have been easier to fix if the error wasn't hidden" \ + -e 's:^\(\s\+\)\($DIR_SBIN/faxmodem $devid\)\( >/dev/null 2>&1\)$:\1\2 #\3 # Hiding these errors is counter productive!:g' \ + -e '# Fix LN for anyone who has LN in their environment' \ + -e 's:^\(LN=\):unset LN\n\1:g' \ + -e '# vgetty and egetty are not readily available on Arch Linux so kill the warning.' \ + -e '# Supress warning: /bin/vgetty does not exist or is not an executable program!' \ + -e '# Supress warning: /bin/egetty does not exist or is not an executable program!' \ + -e 's|^\(\s\+\)\(test -x $PATH_\)\([VE]GETTY\)\(.\+\)$|\1echo "\3 not available for Arch Linux" # \2\3\4 # http://www.hylafax.org/site2/HylaFAQ/Q360.html Q360: The truth about egetty/vgetty|g' \ + -e '# The gsfonts are likely to never be again placed in this folder.' \ + -e '# Why does gs report the folder in the search path?' \ + -e '# Supress warning: /usr/share/ghostscript/fonts does not exist or is not a directory!' \ + -e 's|^\(\s\+\)\(if \[ -d $FDIR \]; then\)$|\1if [ ! -d "$FDIR" -a "$FDIR" = "/usr/share/ghostscript/fonts" ]; then\n\1 echo -n ""\n\1el\2|g' \ + -e '# Branding' \ + -e 's|^\(Note "Setup program for HylaFAX (tm) $VERSION\)."$|\1-Arch Linux."|g' \ + -e '# Improve display for 25 line screens. I skipped one that would take too much regex to get.' \ + -e 's|^\(\t\t\)\(Note ""\)$|\1# \2|g' \ + -e 's|^\(\t \)\(Note ""\)$|\1# \2|g' \ + -e '# Fix genfontmap output to get rid of glyph metric error.' \ + -e 's:\($DIR_SPOOL/bin/genfontmap.ps\) \(> $DIR_SPOOL/etc/Fontmap.HylaFAX\):\1 | $DIR_SPOOL/bin/fmfix.pl \2:g' \ + -e '# Fix some typos. Clarify SNPP.' \ + -e 's|\(\[2\] Init script starts hfaxd\)|\1:|g' \ + -e 's|\(\[3\] Start paging protocol\):\t|\1 (SNPP):|g' \ + -e '# More sbin fixes' \ + -e 's:^\(test -d /usr/sbin &&\):#\1:g' \ + -e '# Remove /etc from path' \ + -e 's|^\(PATH\)=.\+$|\1=/usr/bin:/usr/local/sbin|g' \ + -i 'etc/faxsetup.sh.in' # Var $TTY clashes with the Arch Linux environment and likely all other Linux # too. $TTY contains the terminal device from `tty`. With this already set @@ -363,102 +334,114 @@ prepare() { # same as faxaddmodem ttyUSB0. # With all these bugs fixed you can install HylaFAX+ the way it was # originally designed, and it's not very hard. - sed -s -i -e 's:$TTY\>:$MDMTTY:g' \ - -e 's:\<TTY=:MDMTTY=:g' \ - -e 's:\<read TTY\>:read MDMTTY:g' \ - -e 's:^\(DEVPATH="/dev/"\)$:\1\ncleanMDM () {\n if [ "$1" = "`dirname "$2"`/" ]; then\n MDMTTY="`basename $2`"\n else\n MDMTTY="$2"\n fi\n case "$MDMTTY" in\n /*)SHOWTTY="$MDMTTY";;\n "")SHOWTTY=;;\n *)SHOWTTY="$1$MDMTTY";;\n esac\n}\ncleanMDM "$DEVPATH" "$MDMTTY"\n:g' \ - -e 's?^\(\s\+\)\(prompt "Serial port that modem is connected to .\+\)$?\1echo ""\n\1echo "Leave /dev off if your device is in /dev"\n\1echo "Examples: ttyUSB0, ttyACM0, ttyS0"\n\1\2\n\1test "$MDMTTY" || (cd /dev; ls tty[^0-9]*)\n\1cleanMDM "$DEVPATH" "$MDMTTY"?g' \ - -e 's?$DEVPATH$MDMTTY?$SHOWTTY?g' \ - etc/{faxaddmodem,probemodem}.sh.in + sed -e 's:$TTY\>:$MDMTTY:g' \ + -e 's:\<TTY=:MDMTTY=:g' \ + -e 's:\<read TTY\>:read MDMTTY:g' \ + -e 's:^\(DEVPATH="/dev/"\)$:\1\ncleanMDM () {\n if [ "$1" = "`dirname "$2"`/" ]; then\n MDMTTY="`basename $2`"\n else\n MDMTTY="$2"\n fi\n case "$MDMTTY" in\n /*)SHOWTTY="$MDMTTY";;\n "")SHOWTTY=;;\n *)SHOWTTY="$1$MDMTTY";;\n esac\n}\ncleanMDM "$DEVPATH" "$MDMTTY"\n:g' \ + -e 's?^\(\s\+\)\(prompt "Serial port that modem is connected to .\+\)$?\1echo ""\n\1echo "Leave /dev off if your device is in /dev"\n\1echo "Examples: ttyUSB0, ttyACM0, ttyS0"\n\1\2\n\1test "$MDMTTY" || (cd /dev; ls tty[^0-9]*)\n\1cleanMDM "$DEVPATH" "$MDMTTY"?g' \ + -e 's?$DEVPATH$MDMTTY?$SHOWTTY?g' \ + -i etc/{faxaddmodem,probemodem}.sh.in + # It is not necessary to add faster baud rates to the 2 modem scripts. # 38400 is only the speed at which the script will test the modem. # The modem config will set the proper speed during use. # quick grammar error fix - sed -i -e 's:^a \(modem device \):\1:g' 'man/ondelay.1m' - - #exit 1 - unset LN # On my system this has something in it. The script should - # probably be fixed to prefix _var_ on all variables. Like TTY in Linux, - # given enough systems and enough time eventually a variable conflict will - # occur. Prefixing should prevent this. The idea is to pick a prefix so obtuse - # that no sane person would ever pick it. What does that make us? - if [ ! -s 'Makefile' ]; then - ./configure --nointeractive --with-OPTIMIZER="${CFLAGS}" \ - --target="${CARCH}-arch-linux" \ - --nointeractive \ - --with-DIR_BIN='/usr/bin' \ - --with-DIR_LIB='/usr/lib' \ - --with-DIR_LIBDATA='/usr/lib/fax' \ - --with-DIR_LIBEXEC='/usr/bin' \ - --with-DIR_MAN='/usr/share/man' \ - --with-DIR_SBIN='/usr/bin' \ - --with-SYSVINIT='no' \ - --with-PAGESIZE="${_opt_pagesize}" \ - --with-SCRIPT_SH='/usr/bin/dash' - fi - -# --with-PATH_AFM='/usr/share/fonts/Type1' gs ignores this + sed -e 's:^a \(modem device \):\1:g' -i 'man/ondelay.1m' # unknown isn't good enough for me. Let's brand! # We don't brand any of the build files which just get deleted anyways. - #sed -s -i -e 's:-unknown-linux-:-arch-linux-:g' \ - # etc/{faxaddmodem,probemodem,faxsetup}.sh + # sed -e 's:-unknown-linux-:-arch-linux-:g' -s -i etc/{faxaddmodem,probemodem,faxsetup}.sh.in # This crude branding was eliminated by the configure option above. # A patch from the Gentoo hylafaxplus ebuild. hostname -f produces a useless result on my system - # sed -i -e "s:hostname:hostname -f:g" util/{faxrcvd,pollrcvd}.sh.in + # sed -e 's:hostname:hostname -f:g' -i util/{faxrcvd,pollrcvd}.sh.in # More patches from the Gentoo hylafaxplus ebuild # Respect LDFLAGS(at least partially) - # sed -i -e "/^LDFLAGS/s/LDOPTS}/LDOPTS} ${LDFLAGS}/" defs.in - # sed -i -e "s|-fpic|-fPIC|g" configure + # sed -e "/^LDFLAGS/s/LDOPTS}/LDOPTS} ${LDFLAGS}/" -i 'defs.in' + # sed -e 's|-fpic|-fPIC|g' -i 'configure' + + # A serious error that needs a bit more explanation before somebody gets fired for crashing the fax server. + sed -e 's|\(emsg = fxStr::format("Unable to open scheduler FIFO: %s\)\(",\)$|\1 (try running faxsetup)\2|g' \ + -i 'hfaxd/FIFO.c++' + + # Provide clear instructions to remove and replace the SGI logo + # diff -pNau5 cover.templ{.default,} > '0003-graphic.logo.instructions.patch' + patch -d 'util' -Nup0 < "${srcdir}/0003-graphic.logo.instructions.patch" - # A serious error that needs a bit more explanation before somebody gets fired. - sed -s -i -e 's|\(emsg = fxStr::format("Unable to open scheduler FIFO: %s\)\(",\)$|\1 (try running faxsetup)\2|g' \ - 'hfaxd/FIFO.c++' - #exit 1 set +u + + echo 'Checking for fonts missing from fmfix.pl' + ! grep -o $'\t/[A-Z].*;$' <(gs -q -sDEVICE='tiffg3' -sFONTPATH='/usr/share/fonts/Type1' 'util/genfontmap.ps' | perl '../fmfix.pl') } build() { set -u - cd "${srcdir}/${_pkgnick}-${pkgver}" - make -s # -j $(nproc) # hylafax is not multi threaded make compatible - cd "${srcdir}/sendfaxvsi-1.0" - sh -u 'make.sh' + cd "${_pkgnick}-${pkgver}" + if [ ! -s 'Makefile' ]; then + # On my system LN has something in it. Short variable names should be avoided in scripts. + LN= \ + ./configure \ + --nointeractive \ + --with-OPTIMIZER="${CFLAGS}" \ + --target="${CARCH}-arch-linux" \ + --with-DIR_BIN='/usr/bin' \ + --with-DIR_LIB='/usr/lib' \ + --with-DIR_LIBDATA='/usr/lib/fax' \ + --with-DIR_LIBEXEC='/usr/bin' \ + --with-DIR_MAN='/usr/share/man' \ + --with-DIR_SBIN='/usr/bin' \ + --with-SYSVINIT='no' \ + --with-PAGESIZE="${_opt_pagesize}" \ + --with-SCRIPT_SH='/usr/bin/dash' +# --with-PATH_AFM='/usr/share/fonts/Type1' gs ignores this + fi + + make -s -j1 # hylafax is not multi threaded make compatible + make -C "${srcdir}/sendfaxvsi-${_sendfaxvsicommit}" -j1 set +u } package() { set -u - cd "${srcdir}/${_pkgnick}-${pkgver}" - make INSTALLROOT="${pkgdir}" install + cd "${_pkgnick}-${pkgver}" + make -j1 INSTALLROOT="${pkgdir}" install # My crude VSI-FAX tag support - install -Dpm755 "${srcdir}/sendfaxvsi-1.0/sendfaxvsi" "${pkgdir}/usr/bin/sendfaxvsi" + make -C "${srcdir}/sendfaxvsi-${_sendfaxvsicommit}" -j1 install DESTDIR="${pkgdir}" BINDIR='/usr/bin' - # Thanks to mc I can see that these files have the wrong permissions. + # Thanks to looking at everything in mc I can see that these files have the wrong permissions. chmod 644 "${pkgdir}/var/spool/hylafax/bin/"*.ps # Remove files that are not needed on Linux (from RPM .spec) - rm -f "${pkgdir}/usr/bin/"{faxsetup.irix,faxsetup.bsdi} + rm "${pkgdir}/usr/bin/"{faxsetup.irix,faxsetup.bsdi} rm -f "${pkgdir}/usr/bin/"{ps2fax.imp,ps2fax.dps} - rm -f "${pkgdir}/usr/share/man/man1/sgi2fax.1" + rm "${pkgdir}/usr/share/man/man1/sgi2fax.1" # Huge screwup! We don't want to lose this log file on every upgrade. - rm -f "${pkgdir}/var/spool/hylafax/etc/xferfaxlog" + rm "${pkgdir}/var/spool/hylafax/etc/xferfaxlog" + + # apply PKGBUILD defaults to default etc/skel for hands free multi modem setup + sed -e 's/^\(AreaCode:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_AreaCode}\2/g" \ + -e 's/^\(FAXNumber:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_FAXNumber}\2/g" \ + -e 's/^\(LocalIdentifier:\s\+\)[^#\t]\+\(.*\)$'"/\1\"${_opt_LocalIdentifier}\"\2/g" \ + -e 's/^\(RingsBeforeAnswer:\s\+\)[^#\t]\+\(.*\)$'"/\1${_opt_RingsBeforeAnswer}\2/g" \ + -i "${pkgdir}/var/spool/hylafax/config/skel" + sed -e '# Apply default area code for easier setup' \ + -e 's|^\(AREACODE\)=.\+$'"|\1=${_opt_AreaCode}|g" \ + -i "${pkgdir}/usr/bin/faxsetup" # Leaving this FIFO in the package makes it so that an accidental upgrade to # a live production system immediately shuts down all fax traffic - # therby forcing the admin to quickly run faxsetup to restore operation, + # thereby forcing the admin to quickly run faxsetup to restore operation, # and that's only if the admin knows what to do because the errors on # sendfax don't reveal much about the problem. # 460 Failed to submit job 6: Unable to open scheduler FIFO: No such file or directory. - # See above for where we amend this error. - # Removing the FIFO ensures that the system will continue to run + # See above for where we amend this error to give the poor admin a chance. + # Removing the FIFO here ensures that the system will continue to run # after an upgrade until it is convenient to run faxsetup to restart the - # daemons. Besides, the package doesn't create the FIFO correctly anyways. - rm -f "${pkgdir}/var/spool/hylafax/FIFO" || : + # daemons. Besides, the FIFO from the package is not made correctly. + rm -f "${pkgdir}/var/spool/hylafax/FIFO" # My fixer tool to get rid of the glyph metrics warning. Look above for where sed hacks this in. # Alternate solution: ftp://ftp.hylafax.org/contrib/fontmap/fontmap.pl @@ -497,48 +480,180 @@ package() { cat >> "${_outfile}" << EOF # The .default of this file will always be overwritten by upgrades. Modify the non .default copies! # The following hosts were added by an install option in the ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR -# http://aur.archlinux.org/ +# https://aur.archlinux.org/ EOF fi echo "${_host}" >> "${_outfile}" done + # Add dial rules for USA 7 and 10 digit numbers. The posted examples have them in the wrong order. + # diff -pNau5 dialrules{.default,} > '0001-dialrules.7-10.digits.USA.patch' + patch -d "${pkgdir}/var/spool/hylafax/etc" -Nup0 < "${srcdir}/0001-dialrules.7-10.digits.USA.patch" + install -Dpm755 "${srcdir}/localnxxtoregex.sh" -t "${pkgdir}/usr/bin" + + # top and bottom margin patch because fax doesn't do page layout like a regular printer + # http://aplawrence.com/Linux/hylafax-scripts.html + # diff -pNau5 typerules{.orig,} > '0002-typerules.vertical.margins.patch' + patch -d "${pkgdir}/usr/lib/fax" -Nup0 < "${srcdir}/0002-typerules.vertical.margins.patch" + # More user customizable files from the Slackbuild - cd "${pkgdir}/var/spool/hylafax/etc" + pushd "${pkgdir}/var/spool/hylafax/etc" > /dev/null for _outfile in dialrules* 'cover.templ' 'dpsprinter.ps'; do mv "${_outfile}" "${_outfile}.default" done + popd > /dev/null - cd "${srcdir}/${_pkgnick}-${pkgver}" - # Extended name .default for these files allowing AvantFAX and others + # Extended name .default for these files allowing AvantFAX and others # to Install their own versions. for _outfile in 'archive' 'faxrcvd' 'notify' 'pollrcvd'; do mv "${pkgdir}/var/spool/hylafax/bin/${_outfile}" "${pkgdir}/var/spool/hylafax/bin/${_outfile}.hylafaxplus.default" done + # Don't want a fax cover at two different places. Modified versions are preserved in install. + ln -sf '/var/spool/hylafax/etc/cover.templ' "${pkgdir}/usr/lib/fax/faxcover.ps" + # add systemd files - install -D -m644 "${srcdir}/hfaxd.service" "${pkgdir}/usr/lib/systemd/system/hfaxd.service" - install -D -m644 "${srcdir}/faxq.service" "${pkgdir}/usr/lib/systemd/system/faxq.service" - install -D -m644 "${srcdir}/faxgetty@.service" "${pkgdir}/usr/lib/systemd/system/faxgetty@.service" - install -D -m644 'COPYRIGHT' "${pkgdir}/usr/share/licenses/${_pkgnick}/COPYRIGHT" + install -Dm644 <(cat << EOF +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Unit] +Description=HylaFAX+ client-server protocol server +Documentation=man:hfaxd(8) + +[Service] +Type=forking +ExecStart=/usr/bin/hfaxd -i hylafax +ExecReload=/bin/kill -HUP \$MAINPID + +[Install] +WantedBy=multi-user.target +EOF + ) "${pkgdir}/usr/lib/systemd/system/hfaxd.service" + install -Dm644 <(cat << EOF +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Unit] +Description=HylaFAX+ queue manager +Documentation=man:faxq(8) + +[Service] +Type=forking +ExecStart=/usr/bin/faxq +ExecReload=/bin/kill -HUP \$MAINPID + +[Install] +WantedBy=multi-user.target +EOF + ) "${pkgdir}/usr/lib/systemd/system/faxq.service" + install -Dm644 <(cat << EOF +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. + +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Unit] +Description=HylaFAX+ faxgetty on %i +Documentation=man:faxgetty(8) +After=faxq.service hfaxd.service + +[Service] +ExecStart=/usr/bin/faxgetty %i +Type=simple +Restart=always +RestartSec=0 +KillMode=process + +KillSignal=SIGTERM + +[Install] +WantedBy=multi-user.target +EOF + ) "${pkgdir}/usr/lib/systemd/system/faxgetty@.service" # systemd timer (from the HylaFAX PKGBUILD). No need to install cron. This should be split into two timers. - install -D -m644 "${srcdir}/hylafax.timer" "${pkgdir}/usr/lib/systemd/system/hylafax.timer" + install -Dm644 <(cat << EOF +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Unit] +Description=HylaFAX+ daily fax queue cleanup and deletion of 30 days old faxes +Documentation=man:faxqclean(8) man:faxcron(8) + +[Timer] +OnCalendar=*-*-* ${_opt_MaintenanceTime} +AccuracySec=3h +Persistent=true + +[Install] +WantedBy=multi-user.target +EOF + ) "${pkgdir}/usr/lib/systemd/system/hylafax.timer" # insert the selected maintenance time - sed -i -e 's/^\(OnCalendar\)=.\+$'"/\1=*-*-* ${_opt_MaintenanceTime}/g" "${pkgdir}/usr/lib/systemd/system/hylafax.timer" - install -D -m644 "${srcdir}/hylafax.service" "${pkgdir}/usr/lib/systemd/system/hylafax.service" - install -d -m755 "${pkgdir}/usr/lib/systemd/system/multi-user.target.wants" - # ln -s '../hylafax.timer' "${pkgdir}/usr/lib/systemd/system/multi-user.target.wants/hylafax.timer" # better done in install with systemctl enable + install -Dm644 <(cat << EOF +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Unit] +Description=HylaFAX+ daily fax queue cleanup and deletion of 30 days old faxes +Documentation=man:faxqclean(8) man:faxcron(8) + +[Service] +Type=oneshot +ExecStart=/usr/bin/faxqclean +ExecStart=/usr/bin/faxcron -rcv 30 +Nice=19 +IOSchedulingClass=best-effort +IOSchedulingPriority=7 +#User=uucp +#Group=uucp +EOF + ) "${pkgdir}/usr/lib/systemd/system/hylafax.service" + + # pacman hook for automatic folder change on ghostscript upgrade + install -Dm644 <(cat << EOF +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +[Trigger] +Operation = Upgrade +Type = Package +Target = ghostscript + +[Action] +Description = HylaFax+: Check for changed ghostscript font folder +When = PostTransaction +Exec = /usr/bin/bash /var/spool/hylafax/bin/ghostscript-upgrade.sh +EOF + ) "${pkgdir}/usr/share/libalpm/hooks/hylafax-ghostscript.hook" + install -Dm744 <(cat << EOF +#!/usr/bin/bash + +# Automatically generated by ${pkgname}-${pkgver} PKGBUILD from Arch Linux AUR +# https://aur.archlinux.org/ + +set -e +set -u + +newfolder=(/usr/share/ghostscript/*/Resource/) +if [ "\${EUID}" -eq 0 ]; then + if [ "\${#newfolder[@]}" -ne 1 ]; then + echo "\$0: unable to upgrade ghostscript folder" + else + newfolder="\${newfolder%/}" + newfolder="\${newfolder%/*}/" + sed -e "s:/usr/share/ghostscript/[^/]\+/:\${newfolder}:g" -i '/usr/lib/fax/hyla.conf' '/var/spool/hylafax/etc/setup.cache' + fi +fi +EOF + ) "${pkgdir}/var/spool/hylafax/bin/ghostscript-upgrade.sh" + + install -Dpm644 'COPYRIGHT' "${pkgdir}/usr/share/licenses/${_pkgnick}/COPYRIGHT" set +u - # Ensure there are no forbidden paths. Place at the end of package() and comment out as you find or need exceptions. (git-aurcheck) - ! test -d "${pkgdir}/bin" || { echo "Line ${LINENO} Forbidden: /bin"; false; } - ! test -d "${pkgdir}/sbin" || { echo "Line ${LINENO} Forbidden: /sbin"; false; } - ! test -d "${pkgdir}/lib" || { echo "Line ${LINENO} Forbidden: /lib"; false; } - ! test -d "${pkgdir}/share" || { echo "Line ${LINENO} Forbidden: /share"; false; } - ! test -d "${pkgdir}/usr/sbin" || { echo "Line ${LINENO} Forbidden: /usr/sbin"; false; } - ! test -d "${pkgdir}/usr/local" || { echo "Line ${LINENO} Forbidden: /usr/local"; false; } - #! grep -lr "/sbin" "${pkgdir}" || { echo "Line ${LINENO} Forbidden: /sbin"; false; } - ! grep -lr "/usr/tmp" "${pkgdir}" || { echo "Line ${LINENO} Forbidden: /usr/tmp"; false; } - #! grep -lr "/usr/local" "${pkgdir}" || { echo "Line ${LINENO} Forbidden: /usr/local"; false; } - #! pcre2grep -Ilr "(?<!/usr)/bin" "${pkgdir}" || { echo "Line ${LINENO} Forbidden: /bin"; false; } } set +u |