diff options
Diffstat (limited to 'PKGBUILD')
-rw-r--r-- | PKGBUILD | 209 |
1 files changed, 100 insertions, 109 deletions
@@ -2,12 +2,21 @@ # Contributor: ### BUILD OPTIONS -# Set these variables to ANYTHING that is not null to enable them +# Set the next two variables to ANYTHING that is not null to enable them # Tweak kernel options prior to a build via nconfig _makenconfig= -_enable_gcc_more_v="y" +# Only compile active modules to VASTLY reduce the number of modules built and +# the build time. +# +# To keep track of which modules are needed for your specific system/hardware, +# give module_db a try: https://aur.archlinux.org/packages/modprobed-db +# This PKGBUILD reads the database kept if it exists +# +# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db +_localmodcfg= + # Optionally select a sub architecture by number or leave blank which will # require user interaction during the build. Note that the generic (default) # option is 32. @@ -48,16 +57,6 @@ _enable_gcc_more_v="y" # 34. AMD-Native optimizations autodetected by GCC (MNATIVE_AMD) _subarch=33 -# Only compile active modules to VASTLY reduce the number of modules built and -# the build time. -# -# To keep track of which modules are needed for your specific system/hardware, -# give module_db a try: https://aur.archlinux.org/packages/modprobed-db -# This PKGBUILD reads the database kept if it exists -# -# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db -_localmodcfg= - # Use the current kernel's .config file # Enabling this option will use the .config of the RUNNING kernel rather than # the ARCH defaults. Useful when the package gets updated and you already went @@ -67,10 +66,10 @@ _use_current= ### IMPORTANT: Do no edit below this line unless you know what you're doing -_major=5.10 -_minor=34 +_major=5.12 +_minor=1 _srcname=linux-${_major} -_clr=${_major}.32-1035 +_clr=${_major}.1-1038 pkgbase=linux-clear pkgver=${_major}.${_minor} pkgrel=1 @@ -80,7 +79,7 @@ url="https://github.com/clearlinux-pkgs/linux" license=('GPL2') makedepends=('bc' 'cpio' 'git' 'kmod' 'libelf' 'xmlto') options=('!strip') -_gcc_more_v='20210402' +_gcc_more_v='20210412' source=( "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-${_major}.tar.xz" "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-${_major}.tar.sign" @@ -99,20 +98,20 @@ prepare() { cd ${_srcname} ### Add upstream patches - echo "Add upstream patches" - patch -Np1 -i ../patch-${pkgver} + echo "Add upstream patches" + patch -Np1 -i ../patch-${pkgver} ### Setting version - echo "Setting version..." - scripts/setlocalversion --save-scmversion - echo "-$pkgrel" > localversion.10-pkgrel - echo "${pkgbase#linux}" > localversion.20-pkgname + echo "Setting version..." + scripts/setlocalversion --save-scmversion + echo "-$pkgrel" > localversion.10-pkgrel + echo "${pkgbase#linux}" > localversion.20-pkgname ### Add Clearlinux patches - for i in $(grep '^Patch' ${srcdir}/clearlinux/linux.spec | sed -n 's/.*: //p'); do + for i in $(grep '^Patch' ${srcdir}/clearlinux/linux.spec | grep -Ev '^Patch0112|^Patch0118|^Patch0121' | sed -n 's/.*: //p'); do echo "Applying patch ${i}..." patch -Np1 -i "$srcdir/clearlinux/${i}" - done + done local src for src in "${source[@]}"; do @@ -124,77 +123,72 @@ prepare() { done ### Setting config - echo "Setting config..." - cp -Tf $srcdir/clearlinux/config ./.config + echo "Setting config..." + cp -Tf $srcdir/clearlinux/config ./.config ### Enable extra stuff from arch kernel - echo "Enable extra stuff from arch kernel..." - - # General setup - scripts/config --enable IKCONFIG \ - --enable-after IKCONFIG IKCONFIG_PROC \ - --undefine RT_GROUP_SCHED - - # Power management and ACPI options - scripts/config --enable ACPI_REV_OVERRIDE_POSSIBLE \ - --enable ACPI_TABLE_UPGRADE - - # Enable loadable module support - scripts/config --undefine MODULE_SIG_FORCE \ - --enable MODULE_COMPRESS \ - --enable-after MODULE_COMPRESS MODULE_COMPRESS_XZ - - # Networking support - scripts/config --enable NETFILTER_INGRESS - - # Device Drivers - scripts/config --enable FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER \ - --enable DELL_SMBIOS_SMM \ - --enable NET_VENDOR_AQUANTIA \ - --module PATA_JMICRON \ - --enable-after SOUND SOUND_OSS_CORE \ - --enable SND_OSSEMUL \ - --module-after SND_OSSEMUL SND_MIXER_OSS \ - --module-after SND_MIXER_OSS SND_PCM_OSS \ - --enable-after SND_PCM_OSS SND_PCM_OSS_PLUGINS \ - --module AGP --module-after AGP AGP_INTEL --module-after AGP_INTEL AGP_VIA - - # Kernel hacking -> Compile-time checks and compiler options -> Make section mismatch errors non-fatal - scripts/config --enable SECTION_MISMATCH_WARN_ONLY - - # Security options - scripts/config --enable SECURITY_SELINUX \ - --enable-after SECURITY_SELINUX SECURITY_SELINUX_BOOTPARAM \ - --enable SECURITY_SMACK \ - --enable-after SECURITY_SMACK SECURITY_SMACK_BRINGUP \ - --enable-after SECURITY_SMACK_BRINGUP SECURITY_SMACK_NETFILTER \ - --enable-after SECURITY_SMACK_NETFILTER SECURITY_SMACK_APPEND_SIGNALS \ - --enable SECURITY_TOMOYO \ - --enable SECURITY_APPARMOR \ - --enable SECURITY_YAMA - - # Library routines - scripts/config --enable FONT_TER16x32 - - make olddefconfig - - ### Patch source to unlock additional gcc CPU optimizations - # https://github.com/graysky2/kernel_gcc_patch - if [ "${_enable_gcc_more_v}" = "y" ]; then - echo "Patching to enable GCC optimization for other uarchs..." - patch -Np1 -i "$srcdir/kernel_gcc_patch-$_gcc_more_v/more-uarches-for-kernel-5.8+.patch" - fi - - ### Get kernel version - if [ "${_enable_gcc_more_v}" = "y" ] || [ -n "${_subarch}" ]; then + echo "Enable extra stuff from arch kernel..." + + # General setup + scripts/config --enable IKCONFIG \ + --enable-after IKCONFIG IKCONFIG_PROC \ + --undefine RT_GROUP_SCHED + + # Power management and ACPI options + scripts/config --enable ACPI_REV_OVERRIDE_POSSIBLE \ + --enable ACPI_TABLE_UPGRADE + + # Enable loadable module support + scripts/config --undefine MODULE_SIG_FORCE \ + --enable MODULE_COMPRESS \ + --enable-after MODULE_COMPRESS MODULE_COMPRESS_XZ + + # Networking support + scripts/config --enable NETFILTER_INGRESS + + # Device Drivers + scripts/config --enable FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER \ + --enable DELL_SMBIOS_SMM \ + --enable NET_VENDOR_AQUANTIA \ + --module PATA_JMICRON \ + --enable-after SOUND SOUND_OSS_CORE \ + --enable SND_OSSEMUL \ + --module-after SND_OSSEMUL SND_MIXER_OSS \ + --module-after SND_MIXER_OSS SND_PCM_OSS \ + --enable-after SND_PCM_OSS SND_PCM_OSS_PLUGINS \ + --module AGP --module-after AGP AGP_INTEL --module-after AGP_INTEL AGP_VIA + + # Kernel hacking -> Compile-time checks and compiler options -> Make section mismatch errors non-fatal + scripts/config --enable SECTION_MISMATCH_WARN_ONLY + + # Security options + scripts/config --enable SECURITY_SELINUX \ + --enable-after SECURITY_SELINUX SECURITY_SELINUX_BOOTPARAM \ + --enable SECURITY_SMACK \ + --enable-after SECURITY_SMACK SECURITY_SMACK_BRINGUP \ + --enable-after SECURITY_SMACK_BRINGUP SECURITY_SMACK_NETFILTER \ + --enable-after SECURITY_SMACK_NETFILTER SECURITY_SMACK_APPEND_SIGNALS \ + --enable SECURITY_TOMOYO \ + --enable SECURITY_APPARMOR \ + --enable SECURITY_YAMA + + # Library routines + scripts/config --enable FONT_TER16x32 + + make olddefconfig + + # https://github.com/graysky2/kernel_gcc_patch + # make sure to apply after olddefconfig to allow the next section + echo "Patching to enable GCC optimization for other uarchs..." + patch -Np1 -i "$srcdir/kernel_gcc_patch-$_gcc_more_v/more-uarches-for-kernel-5.8+.patch" + + if [ -n "$_subarch" ]; then + # user wants a subarch so apply choice defined above interactively via 'yes' yes "$_subarch" | make oldconfig - else - make prepare - fi - - ### Prepared version - make -s kernelrelease > version - echo "Prepared $pkgbase version $(<version)" + else + # no subarch defined so allow user to pick one + make oldconfig + fi ### Optionally use running kernel's config # code originally by nous; http://aur.archlinux.org/packages.php?ID=40191 @@ -212,32 +206,29 @@ prepare() { fi ### Optionally load needed modules for the make localmodconfig - # See https://aur.archlinux.org/packages/modprobed-db - if [ -n "$_localmodcfg" ]; then - if [ -e $HOME/.config/modprobed.db ]; then + # See https://aur.archlinux.org/packages/modprobed-db + if [ -n "$_localmodcfg" ]; then + if [ -e $HOME/.config/modprobed.db ]; then echo "Running Steven Rostedt's make localmodconfig now" make LSMOD=$HOME/.config/modprobed.db localmodconfig - else + else echo "No modprobed.db data found" exit - fi fi + fi - ### do not run `make olddefconfig` as it sets default options - yes "" | make config >/dev/null - - ### Running make nconfig + make -s kernelrelease > version + echo "Prepared $pkgbase version $(<version)" - [[ -z "$_makenconfig" ]] || make nconfig + [[ -z "$_makenconfig" ]] || make nconfig ### Save configuration for later reuse - - cp -Tf ./.config "${startdir}/config-${pkgver}-${pkgrel}${pkgbase#linux}" + cp -Tf ./.config "${startdir}/config-${pkgver}-${pkgrel}${pkgbase#linux}" } build() { cd ${_srcname} - make -j$(nproc) bzImage modules + make bzImage modules } _package() { @@ -352,13 +343,13 @@ for _p in "${pkgname[@]}"; do }" done -sha256sums=('dcdf99e43e98330d925016985bfbc7b83c66d367b714b2de0cbbfcbf83d8ca43' +sha256sums=('7d0df6f2bf2384d68d0bd8e1fe3e071d64364dcdc6002e7b5c87c92d48fac366' 'SKIP' - 'ca4e6b6f69a5ac75b0deebd67d1b1eb111ed6e874fe765b450ddaa7d97cd0c41' + 'd90692a8c4bc8d4ea20a21e30927ba4d01bc772c3ff537059303f01a0bfaa813' 'SKIP' - '8aea0d8a9999b0510fa128d79af8a8dc94d25f0a193fd698ebfdf09808472d2e' + 'f1f62b6d2cd89d0ab15f8d7311f5bb775dfc97ff39f93bc77f6f733f75fa7558' '2c98de0814366b041aeee4cbf82b82620c7834bc33752d50f089e8bd7ea5cf5e' - '261574aeee09864929d44a5f9896ad2645fe4539d9ee8a86575bd19a07eed865') + 'f3eb1e857f60a96a0c8d4f25f55a64ddf4aa4b3a33e9fcc6886430cf4789cb1c') validpgpkeys=( 'ABAF11C65A2970B130ABE3C479BE3E4300411886' # Linus Torvalds |