diff options
Diffstat (limited to 'PKGBUILD')
| -rw-r--r-- | PKGBUILD | 334 |
1 files changed, 279 insertions, 55 deletions
@@ -6,71 +6,145 @@ # Contributor: William Rea <sillywilly@gmail.com> # Contributor: Lorenzo Nizzi Grifi Gargiolli <lorenzo.nizzi.grifi@gmail.com> # Maintainer: Ben Morgan <neembi@gmail.com> +# Maintainer: Solomon Choina <shlomochoina@gmail.com> _pkgname="pulseaudio" -pkgname="$_pkgname-git" +pkgbase="$_pkgname-git" +pkgname=( + pulseaudio-git + libpulse-git + pulseaudio-zeroconf-git + pulseaudio-jack-git + pulseaudio-bluetooth-git + pulseaudio-equalizer-git + pulseaudio-rtp-git +) pkgdesc="A featureful, general-purpose sound server (development version)" -pkgver=v12.0.309.geadd987a6 -pkgrel=2 +pkgver=17.0.r4.g5d7cd8bd0 +pkgrel=1 arch=("i686" "x86_64" "armv7h") url="http://pulseaudio.org/" -license=("GPL" "LGPL") -depends=(lib{ltdl,soxr,asyncns,cap,xtst,sm,sndfile} "rtkit" "speexdsp" "tdb" - "orc" "webrtc-audio-processing" jack2 dbus "systemd" "avahi" "openssl" - "lirc" bluez{,-libs} "sbc" python-{pyqt5,dbus,sip} "fftw") #json-c -makedepends=("git" lib{asyncns,cap,xtst,sm,sndfile,tool,soxr} "attr" "rtkit" - "speexdsp" "tdb" "systemd" jack2 dbus "avahi" bluez{,-libs} - "intltool" "sbc" "lirc" "openssl" "fftw" "orc" "gtk3" - "webrtc-audio-processing" "check" "autoconf-archive") #gconf -optdepends=("alsa-plugins: ALSA support" - "pulseaudio-alsa: ALSA configuration (recommended)" - "lirc-utils: infra-red support") -backup=(etc/pulse/{daemon.conf,default.pa,system.pa,client.conf}) -provides=(pulseaudio{,-{zeroconf,lirc,jack,bluetooth,equalizer}} "libpulse") #"pulseaudio-xen" "pulseaudio-gconf" -conflicts=(pulseaudio{,-{zeroconf,lirc,jack,bluetooth,equalizer}} "libpulse") #"pulseaudio-xen" "pulseaudio-gconf" +license=(LGPL-2.1-or-later) +install=pulseaudio.install +makedepends=( alsa-lib + attr + avahi + bluez + bluez-libs + check + dbus + doxygen + fftw + git + gst-plugins-base-libs + gtk3 + jack2 + libasyncns + libcap + libsm + libsndfile + libsoxr + libxtst + lirc + meson + openssl + orc + rtkit + sbc + speexdsp + systemd + tdb + valgrind + webrtc-audio-processing-1 + xmltoman + libwrap + libltdl + python-dbus + python-pyqt5 +) options=(!emptydirs) -source=("git+git://anongit.freedesktop.org/pulseaudio/pulseaudio") -sha256sums=('SKIP') +source=("git+https://gitlab.freedesktop.org/pulseaudio/pulseaudio.git" + "pulseaudio.install") +sha256sums=('SKIP' + '1d4890b10fadb9208c3fefbbed4aca1f22e63a0f102f4c598dc573a55e724cb2') pkgver() { cd "$srcdir/$_pkgname" - git describe --always | sed "s/-/./g" + git describe --long | sed 's/v//;s/\([^-]*-g\)/r\1/;s/-/./g' } -prepare() { - cd "$srcdir/$_pkgname" - NOCONFIGURE=1 ./bootstrap.sh +build() { + arch-meson pulseaudio build \ + -D stream-restore-clear-old-devices=true \ + -D pulsedsp-location='/usr/\$LIB/pulseaudio' \ + -D udevrulesdir=/usr/lib/udev/rules.d \ + -D elogind=disabled \ + -D consolekit=disabled + ninja -C build } -build() { - cd "$srcdir/$_pkgname" +check() { + meson test -C build --print-errorlogs + ninja -C build test-daemon +} - ./configure --prefix=/usr \ - --sysconfdir=/etc \ - --libexecdir=/usr/lib \ - --localstatedir=/var \ - --with-udev-rules-dir=/usr/lib/udev/rules.d \ - --with-pulsedsp-location='/usr/\\$$LIB/pulseaudio' \ - --with-database=tdb \ - --disable-tcpwrap \ - --disable-bluez4 \ - --disable-rpath \ - --disable-default-build-tests \ - DATADIRNAME=share - - # fight unused direct deps - sed -i -e 's/ -shared / -Wl,-O1,--as-needed\0/g' libtool - - make +_pick() { + local p="$1" f d; shift + for f; do + d="$srcdir/$p/${f#$pkgdir/}" + mkdir -p "$(dirname "$d")" + mv "$f" "$d" + rmdir -p --ignore-fail-on-non-empty "$(dirname "$f")" + done } -package() { - cd "$srcdir/$_pkgname" - make DESTDIR="$pkgdir" install bashcompletiondir=/usr/share/bash-completion/completions +package_pulseaudio-git() { + depends=( + alsa-lib + fftw + libcap + libltdl + "libpulse=$pkgver-$pkgrel" + libsm + libsoxr + libxtst + orc + rtkit + speexdsp + tdb + webrtc-audio-processing-1 + libwrap + libsndfile + dconf + ) + optdepends=( + 'pulseaudio-alsa: ALSA configuration (recommended)' + 'pulseaudio-bluetooth-git: Bluetooth support' + 'pulseaudio-equalizer-git: Graphical equalizer' + 'pulseaudio-jack-git: Jack support' + 'pulseaudio-lirc-git: IR (lirc) support' + 'pulseaudio-rtp-git: RTP and RAOP support' + 'pulseaudio-zeroconf-git: Zeroconf support' + ) + provides=("pulse-native-provider" "pulseaudio") + conflicts=("pipewire-pulse" "pulseaudio") + backup=( + etc/pulse/daemon.conf + etc/pulse/default.pa + etc/pulse/system.pa + ) + install=pulseaudio.install + replaces=( + 'pulseaudio-gconf<=11.1' + 'pulseaudio-xen<=9.0' + ) + + + + + DESTDIR="$pkgdir" meson install -C build - # Speed up pulseaudio shutdown so that it exits immediately with - # the last user session (module-systemd-login keeps it alive) - sed -e "/exit-idle-time/iexit-idle-time=0" -i "$pkgdir/etc/pulse/daemon.conf" + cd "$pkgdir" # Assumes that any volume adjustment is intended by the user, who can control # each app's volume. Misbehaving clients can trigger earsplitting volume @@ -78,21 +152,171 @@ package() { # volume control to fall below sink volume; a sink-only volume control will # suddenly be unable to make such an app loud enough. sed -e '/flat-volumes/iflat-volumes = no' \ - -i "$pkgdir/etc/pulse/daemon.conf" + -i etc/pulse/daemon.conf # Superseded by socket activation sed -e '/autospawn/iautospawn = no' \ - -i "$pkgdir/etc/pulse/client.conf" + -i etc/pulse/client.conf # Disable cork-request module, can result in e.g. media players unpausing - # when there"s a Skype call incoming - sed -e "s|/usr/bin/pactl load-module module-x11-cork-request|#&|" -i "$pkgdir/usr/bin/start-pulseaudio-x11" + # when there's a Skype call incoming + sed -e 's|/usr/bin/pactl load-module module-x11-cork-request|#&|' \ + -i usr/bin/start-pulseaudio-x11 # Required by qpaeq sed -e '/Load several protocols/aload-module module-dbus-protocol' \ - -i "$pkgdir/etc/pulse/default.pa" + -i etc/pulse/default.pa + + # Avoid warning about nonexistent dir + # https://gitlab.archlinux.org/archlinux/packaging/packages/pulseaudio/-/issues/3 + mkdir -p etc/pulse/{default,system}.pa.d + + # Split packages + _pick libpulse etc/pulse/client.conf + _pick libpulse usr/bin/pa{cat,ctl,dsp,mon,play,rec,record} + _pick libpulse usr/lib/libpulse{,-simple,-mainloop-glib}.so* + _pick libpulse usr/lib/{cmake,pkgconfig} + _pick libpulse usr/lib/pulseaudio/libpulse{dsp,common-*}.so + _pick libpulse usr/include + _pick libpulse usr/share/man/man1/pa{cat,ctl,dsp,mon,play,rec,record}.1 + _pick libpulse usr/share/man/man5/pulse-client.conf.5 + _pick libpulse usr/share/bash-completion/completions/pa{cat,ctl,dsp,play,rec,record} + _pick libpulse usr/share/bash-completion/completions/pulseaudio + _pick libpulse usr/share/vala + _pick libpulse usr/share/zsh + + local moddir=usr/lib/pulseaudio/modules + + _pick zeroconf $moddir/libavahi-wrap.so + _pick zeroconf $moddir/module-zeroconf-{publish,discover}.so + _pick zeroconf $moddir/module-raop-discover.so + + _pick lirc $moddir/module-lirc.so + + _pick jack $moddir/module-jack-{sink,source}.so + _pick jack $moddir/module-jackdbus-detect.so + + _pick bluetooth $moddir/libbluez5-util.so + _pick bluetooth $moddir/module-bluetooth-{discover,policy}.so + _pick bluetooth $moddir/module-bluez5-{discover,device}.so + + _pick equalizer $moddir/module-equalizer-sink.so + _pick equalizer usr/bin/qpaeq + + _pick rtp $moddir/lib{rtp,raop}.so + _pick rtp $moddir/module-rtp-{send,recv}.so + _pick rtp $moddir/module-raop-sink.so +} + +package_libpulse-git() { + pkgdesc="$pkgdesc (client library) (development)" + depends=( + dbus + libasyncns + libsndfile + libxcb + systemd + ) + optdepends=( + 'glib2: mainloop integration' + 'pulse-native-provider: PulseAudio backend' + ) + provides=( + libpulse-mainloop-glib.so + libpulse-simple.so + libpulse.so + ) + license=(LGPL) + backup=(etc/pulse/client.conf) + provides=(libpulse) + conflicts=(libpulse) - rm "$pkgdir/etc/dbus-1/system.d/pulseaudio-system.conf" + mv libpulse/* "$pkgdir" +} + +package_pulseaudio-zeroconf-git() { + pkgdesc="Zeroconf support for PulseAudio (development)" + depends=( + avahi + "pulseaudio-git=$pkgver-$pkgrel" + ) + provides=(pulseaudio-zeroconf) + conflicts=(pulseaudio-zeroconf) + + mv zeroconf/* "$pkgdir" +} + +package_pulseaudio-lirc() { + pkgdesc="IR (lirc) support for PulseAudio (development)" + depends=( + lirc + "pulseaudio-git=$pkgver-$pkgrel" + ) + provides=(pulseaudio-lirc) + conflicts=(pulseaudio-lirc) - install -Dm644 shell-completion/zsh/_pulseaudio "$pkgdir/usr/share/zsh/site-functions/_pulseaudio" + mv lirc/* "$pkgdir" } + +package_pulseaudio-jack-git() { + pkgdesc="Jack support for PulseAudio (development)" + depends=( + jack + "pulseaudio-git=$pkgver-$pkgrel" + ) + provides=(pulseaudio-jack) + conflicts=(pulseaudio-jack) + + mv jack/* "$pkgdir" +} + +package_pulseaudio-bluetooth-git() { + pkgdesc="Bluetooth support for PulseAudio (development)" + depends=( + bluez + bluez-libs + gst-plugins-base-libs + "pulseaudio-git=$pkgver-$pkgrel" + sbc + ) + conflicts=(pulseaudio-bluetooth) + provides=(pulseaudio-bluetooth) + optdepends=('gst-plugins-bad: AptX and LDAC support') + + mv bluetooth/* "$pkgdir" +} + +package_pulseaudio-equalizer-git() { + pkgdesc="Graphical equalizer for PulseAudio (development)" + depends=( + "pulseaudio-git=$pkgver-$pkgrel" + python-dbus + python-pyqt5 + fftw + python + glibc + dbus + ) + conflicts=(pulseaudio-equalizer) + provides=(pulseaudio-equalizer) + + mv equalizer/* "$pkgdir" +} + +package_pulseaudio-rtp-git() { + pkgdesc="RTP and RAOP support for PulseAudio (development)" + provides=(pulseaudio-rtp) + conflicts=(pulseaudio-rtp) + depends=( + gst-plugins-base + gst-plugins-base-libs + gst-plugins-good + openssl + "pulseaudio-git=$pkgver-$pkgrel" + ) + + mv rtp/* "$pkgdir" +} + +# vim:set sw=2 et: + |