diff options
Diffstat (limited to 'PKGBUILD')
| -rw-r--r-- | PKGBUILD | 189 |
1 files changed, 105 insertions, 84 deletions
@@ -1,106 +1,127 @@ -# Maintainer: Matthias Blaicher <matthias at blaicher dot com> -# Co-Maintainer: Danny Dutton <duttondj@vt.edu> +# Maintainer: Gabriel Souza Franco <Z2FicmllbGZyYW5jb3NvdXphQGdtYWlsLmNvbQ==> +# Contributor: Matthias Blaicher <matthias at blaicher dot com> +# Contributor: Danny Dutton <duttondj@vt.edu> # # NOTE: If you plan on using the usbblaster make sure you are member of the plugdev group. -# NOTE: Altera has dramatically changed their packing in regards to version 12. This -# PKGBUILD will install the full Altera suite now. Be aware that the space requirement -# for installation is around 14GB but packaging may require up to 54GB of space. # pkgname=quartus-free -pkgver=16.0.0.211 -pkgrel=2 +_mainver=18.0 +# Keep dot in _patchver +_patchver=.0 +_buildver=614 +_basever=.0.614 +pkgver=${_mainver}${_patchver}.${_buildver} +pkgrel=1 pkgdesc="Quartus Prime Lite Edition design software for Altera FPGA's" -arch=('i686' 'x86_64') +arch=('x86_64') url="https://dl.altera.com/?edition=lite" license=('custom') -_build_nr=$(echo ${pkgver} | cut -d '.' -f4) -_alteradir="/opt/altera/${pkgver%.*.*}" - -# Change this to "ae" if using ModelSim Subscription Edition -_modelsimver="ase" +_alteradir="/opt/altera/${_mainver}" # According to the installer script, these dependencies are needed for the installer -if [[ $CARCH = i686 ]] -then - depends=('desktop-file-utils' 'expat' 'fontconfig' 'freetype2' - 'glibc' 'gtk2' 'libcanberra' 'libpng' 'libpng12' 'libice' 'libsm' - 'util-linux' 'ncurses' 'ncurses5-compat-libs' 'tcl' 'tcllib' - 'zlib' 'libx11' 'libxau' 'libxdmcp' 'libxext' 'libxft' - 'libxrender' 'libxt' 'libxtst') -fi - -if [[ $CARCH = x86_64 ]] -then - depends=('desktop-file-utils' 'expat' 'fontconfig' 'freetype2' - 'glibc' 'gtk2' 'libcanberra' 'libpng' 'libpng12' 'libice' 'libsm' - 'util-linux' 'ncurses' 'tcl' 'tcllib' 'zlib' 'libx11' 'libxau' - 'libxdmcp' 'libxext' 'libxft' 'libxrender' 'libxt' 'libxtst' - - 'lib32-expat' 'lib32-fontconfig' 'lib32-freetype2' 'lib32-glibc' - 'lib32-gtk2' 'lib32-libcanberra' 'lib32-libpng' 'lib32-libpng12' - 'lib32-libice' 'lib32-libsm' 'lib32-util-linux' 'lib32-ncurses' - 'lib32-ncurses5-compat-libs' 'lib32-zlib' 'lib32-libx11' - 'lib32-libxau' 'lib32-libxdmcp' 'lib32-libxext' 'lib32-libxft' - 'lib32-libxrender' 'lib32-libxt' 'lib32-libxtst') -fi - -makedepends=('bash') - -# A more permanent source for lib32-freetype2-2.5.0.1-1-x86-64 should be found -source=("https://download.altera.com/akdlm/software/acdsinst/${pkgver%.*.*}/${_build_nr}/ib_tar/Quartus-lite-${pkgver}-linux.tar" - "https://gaming.jhu.edu/mirror/archlinux/multilib/os/x86_64/lib32-freetype2-2.5.0.1-1-x86_64.pkg.tar.xz" # Used for a freetype bugfix HACK - "quartus.sh" "quartus.desktop" "51-usbblaster.rules" "quartus.install" "modelsim-ase.desktop" "modelsim-ae.desktop") -md5sums=('A3AD9370D0773F4E6AC41D1EAC4C85EE' - 'd3b3b7cdf874b6dd0b60c40d84dd9128' - '067c444cae7fe31d3608245712b43ce8' - '32b17cb8b992fc2dccd33d87f0dcd8ce' - 'f5744dc4820725b93917e3a24df13da9' - 'a331a81c44aed062a7af6d28542c3d82' - 'bb11a542139ea8ded899ea42588ec0f7' - 'eb4fbf2b7b3a2ffa59ccac57fff968e5') - -options=('!strip' '!upx') # Stripping and UPX will takes ages, I'd avoid it. -install='quartus.install' -PKGEXT=".pkg.tar" - -# Need to patch some Quartus/ModelSim files -prepare() { - cd "${srcdir}" - - echo "Notice: May require up to 54GB of free space during package building!" +depends=('lib32-expat' 'lib32-fontconfig' 'lib32-freetype2' 'lib32-glibc' + 'lib32-gtk2' 'lib32-libcanberra' 'lib32-libpng' 'lib32-libice' 'lib32-libsm' + 'lib32-util-linux' 'lib32-ncurses' 'lib32-ncurses5-compat-libs' 'lib32-zlib' + 'lib32-libx11' 'lib32-libxau' 'lib32-libxdmcp' 'lib32-libxext' 'lib32-libxft' + 'lib32-libxrender' 'lib32-libxt' 'lib32-libxtst') + +makedepends=('unzip' 'metakit' 'tcl-cookfs' 'tdom' 'patchelf') + +source=("http://download.altera.com/akdlm/software/acdsinst/${_mainver}std${_patchver/.0//}/${_buildver}/ib_tar/Quartus-lite-${pkgver}-linux.tar" + 'quartus.sh' 'quartus.desktop' 'modelsim-ase.desktop' '51-usbblaster.rules' 'installFiles.tcl') +sha256sums=('25d40a57c1c2e66a36f18fd7545b5ba39e75e7db6201bb0c86da8e909d5a8915' + '2a3d61e6f01aa16c9d3ddd40e9741b9fd080496db5437530b4e38faf6771c1ed' + 'f8ba2a84c6f7551bb4ab62d17f77e2814c70871ddb15f0276f1bf89cc6c674b8' + '1092f7fe1e6471f2f6fe12177ecb8781c26ec1fededd10f9e65de921debb8696' + 'dd9d33fa2698a0ec11ae86f4508f77e2e12bf4a21224f5b16640bc41d6c0999b' + 'e91f5fceffe9220f15edd6fc403c578ad260ba81debf27a4978d0c07fcd8649e') + +options=(!strip !debug) # Stripping will takes ages, I'd avoid it +PKGEXT=".pkg.tar" # Same for compression + +package() { + echo "Notice: Requires around 34GB of free space during package building!" echo "Extracting install binaries and scripts from downloaded tar..." - # Run setup.sh to extract Quartus, ModelSim, and device/help files - DISPLAY="" bash ./setup.sh --mode unattended --unattendedmodeui none --installdir "${srcdir}${_alteradir}" + + # Quartus installer deadlocks when using recent glibc + # Work around it by doing the install ourselves + + echo "==> Installing QuartusLiteSetup" + ./installFiles.tcl components/QuartusLiteSetup-${_mainver}${_basever}-linux.run "${pkgdir}${_alteradir}" + + echo "==> Installing QuartusHelpSetup" + ./installFiles.tcl components/QuartusHelpSetup-${_mainver}${_basever}-linux.run "${pkgdir}${_alteradir}" + unzip -qq -o "${pkgdir}${_alteradir}/quartus/common/help/webhelp.zip" -d "${pkgdir}${_alteradir}/quartus/common/help/" + rm -f "${pkgdir}${_alteradir}/quartus/common/help/webhelp.zip" + + echo "==> Installing ModelSimSetup" + ./installFiles.tcl components/ModelSimSetup-${_mainver}${_basever}-linux.run "${pkgdir}${_alteradir}" "product_key modelsim_ase" + unzip -qq -o "${pkgdir}${_alteradir}/modelsim_ase/altera/modelsim_altera_verilog.zip" -d "${pkgdir}${_alteradir}/modelsim_ase/altera" + rm -f "${pkgdir}${_alteradir}/modelsim_ase/altera/modelsim_altera_verilog.zip" + unzip -qq -o "${pkgdir}${_alteradir}/modelsim_ase/altera/modelsim_altera_vhdl.zip" -d "${pkgdir}${_alteradir}/modelsim_ase/altera" + rm -f "${pkgdir}${_alteradir}/modelsim_ase/altera/modelsim_altera_vhdl.zip" + + for dev in arria_lite cyclone10lp cyclone cyclonev max10 max; do + echo "=> Installing component files for ${dev} devices" + unzip -qq -o components/${dev}-${_mainver}${_basever}.qdz -d "${pkgdir}${_alteradir}" + done + + #echo "=> Installing update file QuartusSetup-${pkgver}" + #./installFiles.tcl components/QuartusSetup-${pkgver}-linux.run "${pkgdir}${_alteradir}" echo "Finished extracting binaries and scripts." - # Remove uninstaller and install logs since we have a working package management - rm -r "${srcdir}${_alteradir}/uninstall" - rm -r "${srcdir}${_alteradir}/logs" - + # Remove useless unzip binaries + find "${pkgdir}${_alteradir}" -name "unzip" -or -name "unzip32" -delete + # Remove not installed folder + rmdir "${pkgdir}${_alteradir}/modelsim_ae" + + # vlib needs this folder for some reason + ln -s ${_alteradir}/modelsim_ase/linuxaloem "${pkgdir}${_alteradir}/modelsim_ase/linuxpe" + + # Fix interpreter for the license manager + for prog in quartus/linux64/{lmutil,lmgrd}; do + patchelf --set-interpreter /lib64/ld-linux-x86-64.so.2 "${pkgdir}${_alteradir}/${prog}" + done + for prog in ip/altera/mentor_vip_ae/common/linux{,_x86_64}/mgls/bin/lmgrd modelsim_ase/linuxaloem/{mgls/bin/,}{lmutil,lmgrd}; do + patchelf --set-interpreter /lib/ld-linux.so.2 "${pkgdir}${_alteradir}/${prog}" + done + + # Create Lite "license" files + touch "${pkgdir}${_alteradir}/quartus/linux64/qvweid.fil" + touch "${pkgdir}${_alteradir}/modelsim_ase/lib/.awe" + + # This file is removed for some reason + rm -f "${pkgdir}${_alteradir}/quartus/linux64/libsys_tb2_base.so" + + # The installer creates this file + mkdir -p "${pkgdir}${_alteradir}/quartus/sopc_builder" + cat > "${pkgdir}${_alteradir}/quartus/sopc_builder/.sopc_builder" <<EOF +# .sopc_builder configuration file: +sopc_builder = "${_alteradir}/quartus/sopc_builder"; +sopc_legacy_dir = ""; +sopc_quartus_dir = "${_alteradir}/quartus/"; +sopc_modelsim_dir = ""; +sopc_ui_debug = "0"; +EOF + # Replace altera directory in integration files - sed -i.bak "s,_alteradir,$_alteradir,g" quartus.sh - sed -i.bak "s,_alteradir,$_alteradir,g" quartus.desktop - sed -i.bak "s,_alteradir,$_alteradir,g" "modelsim-${_modelsimver}.desktop" + sed -i "s,_alteradir,${_alteradir},g" quartus.sh + sed -i "s,_alteradir,${_alteradir},g" quartus.desktop + sed -i "s,_alteradir,${_alteradir},g" modelsim-ase.desktop # Fix modelsim startup code for Linux Kernel >=4.0 # see https://wiki.archlinux.org/index.php/Altera_Design_Software - sed -i.bak "s,linux_rh60,linux,g" "${srcdir}${_alteradir}/modelsim_${_modelsimver}/vco" + sed -i 's,linux_rh60,linux,g' "${pkgdir}${_alteradir}/modelsim_ase/vco" - # Tell ModelSim where to find the specific lib32-freetype2 libraries it requires - # see https://wiki.archlinux.org/index.php/Altera_Design_Software#With_freetype2_2.5.0.1-1 - sed -i.bak2 "10s,^,export LD_LIBRARY_PATH=${_alteradir}/modelsim_${_modelsimver}/lib \n,g" "${srcdir}${_alteradir}/modelsim_${_modelsimver}/vco" -} + # Modelsim bundles a copy of tkImg linked to old versions of libs + # Replace by system version + rm -rf "${pkgdir}${_alteradir}/modelsim_ase/linuxaloem/Img1.3" + ln -s /usr/lib32/Img[0-9]* "${pkgdir}${_alteradir}/modelsim_ase/linuxaloem/Img" -package() { - # Copy Quartus over to pkgdir for installation - mkdir -p "${pkgdir}${_alteradir}" - cp -r "${srcdir}${_alteradir}"/* "${pkgdir}${_alteradir}" + # Suppress spurious warning about linux-gate.so.1 + sed -i '/msg_system/a suppress = 3116' "${pkgdir}${_alteradir}/modelsim_ase/modelsim.ini" - # Place the lib32-freetype2 libraries where ModelSim is now expecting them to be - # see https://wiki.archlinux.org/index.php/Altera_Design_Software#With_freetype2_2.5.0.1-1 - install -D -m755 usr/lib32/libfreetype.so* "${pkgdir}${_alteradir}/modelsim_${_modelsimver}/lib" - # Copy license file install -D -m644 "${pkgdir}${_alteradir}/licenses/license.txt" "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE" @@ -108,5 +129,5 @@ package() { install -D -m755 quartus.sh "${pkgdir}/etc/profile.d/quartus.sh" install -D -m644 51-usbblaster.rules "${pkgdir}/etc/udev/rules.d/51-usbblaster.rules" install -D -m644 quartus.desktop "${pkgdir}/usr/share/applications/quartus.desktop" - install -D -m644 modelsim-${_modelsimver}.desktop "${pkgdir}/usr/share/applications/modelsim-${_modelsimver}.desktop" + install -D -m644 modelsim-ase.desktop "${pkgdir}/usr/share/applications/modelsim-ase.desktop" } |