diff options
Diffstat (limited to 'drpadmin.1')
-rw-r--r-- | drpadmin.1 | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/drpadmin.1 b/drpadmin.1 new file mode 100644 index 000000000000..3dfd0bc3c831 --- /dev/null +++ b/drpadmin.1 @@ -0,0 +1,143 @@ +. Copyright (c) 1998 Digi International, All Rights Reserved. +. +. $Id: drpadmin.1m,v 1.4 2001/08/08 20:42:08 jamesp Exp $ +. +.TH DRPADMIN 1M "November 1, 1998" +.SH NAME +drpadmin - Digi Realport Configuration Utility +.SH SYNOPSIS +.TP 14 +drpadmin +.SH DESCRIPTION +The drpadmin utility is invoked by the system administrator to +view, add, remove, or change the configuration of RealPort-enabled +Products used with the +.B dgrp +driver. When invoked by a non root user the current configuration +is displayed along with any kernel warning messages. Configuration +is not available to a non root user. +.PP +When invoked, drpadmin begins a question-and-answer +terminal conversation with the user. The user may +.B add +a RealPort-enabled product, +.B show +the current configuration and other details provided by the kernel driver, +.B remove +a previously configured unit, or +.B reset +a previously configured unit +.PP +In the +.B show +operation, the program simply displays the contents of the +.I /etc/dgrp.backing.store +file with the +.B less +program. +.PP +The show operations are safe to run any time. +The remaining operations may cause +temporary or permanent service interruptions to your Realport devices. +.PP +In the +.B add +operation, the user is asked for: +.TP 8 +Remote node name or IP address +The TCP/IP node name, or the numeric dot-address of the Digi ethernet-based +serial device. +.TP +Number of ports +The number of tty devices to be created for this unit. +If this number is less than the number of physical ports, +only the entered number will be available to the Realport Driver. +The unassigned ports will be available for other connection types. +Some Digi products and drivers accept other connection types to assigned ports +so long as there are no active Realport connections. +If this number is greater, the additional devices will not be usable +unless/until the hardware is expanded. +.TP +Realport tty device id +This one or two character alphanumeric string is used to generate +the +.BI /dev/tty XN, +.BI /dev/pr XN +and +.BI /dev/cu XN +device names for this unit. +Here +.I X +is the entered string, and +.I N +is the automatically generated 2 digit port number in the range 01 to 64. +.TP +Encryption +The encryption setting for this unit. If your device does not support +encryption then encryption should not be enabled or the device will +not function. Check your device specifications to see if encryption +is supported. +.TP +Network link speed +This parameter should be specified only when the network connection from +the system to the remote device includes a WAN link slower +than 1 MBit/second. +The user may enter either simply the WAN speed +(eg 56000 for a 56K Frame Relay link) +or may enter a complete WAN speed string as documented +in the +.BR drpd (1m) +manual page. +.PP +When all data is entered, the +.B add +command calls +.B dgrp_cfg_node init +to load the kernel module if not already loaded and +activate the device. The new device is then immediately available. +.PP +drpadmin only configures the most +common options. Please see the +.BR dgrp_cfg_node (1m) +manual page for all available options. +.PP +In the +.B remove +operation, the user is first asked for the unit ID +to delete as displayed by the +.B show +option. The command then calls +.B dgrp_cfg_node uninit +to deactivate the device with the kernel module. +When the last device is deactivated the kernel module is unloaded +.PP +The configuration changes take effect immediately. +.PP +In the +.B reset +operation, the user is first asked for the unit ID +to reset as displayed by the +.B show +option. The command then calls +.B dgrp_cfg_node stop +then +.B dgrp_cfg_node start +to reset the device with the kernel module. +.PP +When the +.B reset +operation is complete all connections using the device will be reset. +.PP +To change the configuration of a remote device, +the unit must first be removed and then added back +into the configuration. +.PP +.B dgrp_cfg_node stop +and +.B dgrp_cfg_node start +can be used to change the IP address of a configured unit. +.PP +.SH "SEE ALSO" +.BR ditty (1), +.BR drpd (1m), +.BR dgrp_cfg_node (1m) |