diff options
Diffstat (limited to 'sdt.h')
| -rw-r--r-- | sdt.h | 430 |
1 files changed, 0 insertions, 430 deletions
diff --git a/sdt.h b/sdt.h deleted file mode 100644 index c0c5a492cb9c..000000000000 --- a/sdt.h +++ /dev/null @@ -1,430 +0,0 @@ -/* <sys/sdt.h> - Systemtap static probe definition macros. - - This file is dedicated to the public domain, pursuant to CC0 - (https://creativecommons.org/publicdomain/zero/1.0/) -*/ - -#ifndef _SYS_SDT_H -#define _SYS_SDT_H 1 - -/* - This file defines a family of macros - - STAP_PROBEn(op1, ..., opn) - - that emit a nop into the instruction stream, and some data into an auxiliary - note section. The data in the note section describes the operands, in terms - of size and location. Each location is encoded as assembler operand string. - Consumer tools such as gdb or systemtap insert breakpoints on top of - the nop, and decode the location operand-strings, like an assembler, - to find the values being passed. - - The operand strings are selected by the compiler for each operand. - They are constrained by gcc inline-assembler codes. The default is: - - #define STAP_SDT_ARG_CONSTRAINT nor - - This is a good default if the operands tend to be integral and - moderate in number (smaller than number of registers). In other - cases, the compiler may report "'asm' requires impossible reload" or - similar. In this case, consider simplifying the macro call (fewer - and simpler operands), reduce optimization, or override the default - constraints string via: - - #define STAP_SDT_ARG_CONSTRAINT g - #include <sys/sdt.h> - - See also: - https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation - https://gcc.gnu.org/onlinedocs/gcc/Constraints.html - */ - - - -#ifdef __ASSEMBLER__ -# define _SDT_PROBE(provider, name, n, arglist) \ - _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING_1, (_SDT_DEPAREN_##n arglist)) \ - _SDT_ASM_BASE -# define _SDT_ASM_1(x) x; -# define _SDT_ASM_2(a, b) a,b; -# define _SDT_ASM_3(a, b, c) a,b,c; -# define _SDT_ASM_5(a, b, c, d, e) a,b,c,d,e; -# define _SDT_ASM_STRING_1(x) .asciz #x; -# define _SDT_DEPAREN_0() /* empty */ -# define _SDT_DEPAREN_1(a) a -# define _SDT_DEPAREN_2(a,b) a b -# define _SDT_DEPAREN_3(a,b,c) a b c -# define _SDT_DEPAREN_4(a,b,c,d) a b c d -# define _SDT_DEPAREN_5(a,b,c,d,e) a b c d e -# define _SDT_DEPAREN_6(a,b,c,d,e,f) a b c d e f -# define _SDT_DEPAREN_7(a,b,c,d,e,f,g) a b c d e f g -# define _SDT_DEPAREN_8(a,b,c,d,e,f,g,h) a b c d e f g h -# define _SDT_DEPAREN_9(a,b,c,d,e,f,g,h,i) a b c d e f g h i -# define _SDT_DEPAREN_10(a,b,c,d,e,f,g,h,i,j) a b c d e f g h i j -# define _SDT_DEPAREN_11(a,b,c,d,e,f,g,h,i,j,k) a b c d e f g h i j k -# define _SDT_DEPAREN_12(a,b,c,d,e,f,g,h,i,j,k,l) a b c d e f g h i j k l -#else -# define _SDT_PROBE(provider, name, n, arglist) \ - do { \ - __asm__ __volatile__ (_SDT_ASM_BODY(provider, name, _SDT_ASM_ARGS, (n)) \ - :: _SDT_ASM_OPERANDS_##n arglist); \ - __asm__ __volatile__ (_SDT_ASM_BASE); \ - } while (0) -# define _SDT_S(x) #x -# define _SDT_ASM_1(x) _SDT_S(x) "\n" -# define _SDT_ASM_2(a, b) _SDT_S(a) "," _SDT_S(b) "\n" -# define _SDT_ASM_3(a, b, c) _SDT_S(a) "," _SDT_S(b) "," \ - _SDT_S(c) "\n" -# define _SDT_ASM_5(a, b, c, d, e) _SDT_S(a) "," _SDT_S(b) "," \ - _SDT_S(c) "," _SDT_S(d) "," \ - _SDT_S(e) "\n" -# define _SDT_ASM_ARGS(n) _SDT_ASM_STRING(_SDT_ASM_TEMPLATE_##n) -# define _SDT_ASM_STRING_1(x) _SDT_ASM_1(.asciz #x) - -# define _SDT_ARGFMT(no) %n[_SDT_S##no]@_SDT_ARGTMPL(_SDT_A##no) - -# ifndef STAP_SDT_ARG_CONSTRAINT -# if defined __powerpc__ -# define STAP_SDT_ARG_CONSTRAINT nZr -# else -# define STAP_SDT_ARG_CONSTRAINT nor -# endif -# endif - -# define _SDT_STRINGIFY(x) #x -# define _SDT_ARG_CONSTRAINT_STRING(x) _SDT_STRINGIFY(x) -# define _SDT_ARG(n, x) \ - [_SDT_S##n] "n" ((_SDT_ARGSIGNED (x) ? 1 : -1) * (int) _SDT_ARGSIZE (x)), \ - [_SDT_A##n] _SDT_ARG_CONSTRAINT_STRING (STAP_SDT_ARG_CONSTRAINT) (_SDT_ARGVAL (x)) -#endif -#define _SDT_ASM_STRING(x) _SDT_ASM_STRING_1(x) - -#define _SDT_ARGARRAY(x) (__builtin_classify_type (x) == 14 \ - || __builtin_classify_type (x) == 5) - -#ifdef __cplusplus -# define _SDT_ARGSIGNED(x) (!_SDT_ARGARRAY (x) \ - && __sdt_type<__typeof (x)>::__sdt_signed) -# define _SDT_ARGSIZE(x) (_SDT_ARGARRAY (x) \ - ? sizeof (void *) : sizeof (x)) -# define _SDT_ARGVAL(x) (x) - -# include <cstddef> - -template<typename __sdt_T> -struct __sdt_type -{ - static const bool __sdt_signed = false; -}; - -#define __SDT_ALWAYS_SIGNED(T) \ -template<> struct __sdt_type<T> { static const bool __sdt_signed = true; }; -#define __SDT_COND_SIGNED(T,CT) \ -template<> struct __sdt_type<T> { static const bool __sdt_signed = ((CT)(-1) < 1); }; -__SDT_ALWAYS_SIGNED(signed char) -__SDT_ALWAYS_SIGNED(short) -__SDT_ALWAYS_SIGNED(int) -__SDT_ALWAYS_SIGNED(long) -__SDT_ALWAYS_SIGNED(long long) -__SDT_ALWAYS_SIGNED(volatile signed char) -__SDT_ALWAYS_SIGNED(volatile short) -__SDT_ALWAYS_SIGNED(volatile int) -__SDT_ALWAYS_SIGNED(volatile long) -__SDT_ALWAYS_SIGNED(volatile long long) -__SDT_ALWAYS_SIGNED(const signed char) -__SDT_ALWAYS_SIGNED(const short) -__SDT_ALWAYS_SIGNED(const int) -__SDT_ALWAYS_SIGNED(const long) -__SDT_ALWAYS_SIGNED(const long long) -__SDT_ALWAYS_SIGNED(const volatile signed char) -__SDT_ALWAYS_SIGNED(const volatile short) -__SDT_ALWAYS_SIGNED(const volatile int) -__SDT_ALWAYS_SIGNED(const volatile long) -__SDT_ALWAYS_SIGNED(const volatile long long) -__SDT_COND_SIGNED(char, char) -__SDT_COND_SIGNED(wchar_t, wchar_t) -__SDT_COND_SIGNED(volatile char, char) -__SDT_COND_SIGNED(volatile wchar_t, wchar_t) -__SDT_COND_SIGNED(const char, char) -__SDT_COND_SIGNED(const wchar_t, wchar_t) -__SDT_COND_SIGNED(const volatile char, char) -__SDT_COND_SIGNED(const volatile wchar_t, wchar_t) -#if defined (__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4)) -/* __SDT_COND_SIGNED(char16_t) */ -/* __SDT_COND_SIGNED(char32_t) */ -#endif - -template<typename __sdt_E> -struct __sdt_type<__sdt_E[]> : public __sdt_type<__sdt_E *> {}; - -template<typename __sdt_E, size_t __sdt_N> -struct __sdt_type<__sdt_E[__sdt_N]> : public __sdt_type<__sdt_E *> {}; - -#elif !defined(__ASSEMBLER__) -__extension__ extern unsigned long long __sdt_unsp; -# define _SDT_ARGINTTYPE(x) \ - __typeof (__builtin_choose_expr (((__builtin_classify_type (x) \ - + 3) & -4) == 4, (x), 0U)) -# define _SDT_ARGSIGNED(x) \ - (!__extension__ \ - (__builtin_constant_p ((((unsigned long long) \ - (_SDT_ARGINTTYPE (x)) __sdt_unsp) \ - & ((unsigned long long)1 << (sizeof (unsigned long long) \ - * __CHAR_BIT__ - 1))) == 0) \ - || (_SDT_ARGINTTYPE (x)) -1 > (_SDT_ARGINTTYPE (x)) 0)) -# define _SDT_ARGSIZE(x) \ - (_SDT_ARGARRAY (x) ? sizeof (void *) : sizeof (x)) -# define _SDT_ARGVAL(x) (x) -#endif - -#if defined __powerpc__ || defined __powerpc64__ -# define _SDT_ARGTMPL(id) %I[id]%[id] -#elif defined __i386__ -# define _SDT_ARGTMPL(id) %w[id] /* gcc.gnu.org/PR80115 */ -#else -# define _SDT_ARGTMPL(id) %[id] -#endif - -#ifdef __LP64__ -# define _SDT_ASM_ADDR .8byte -#else -# define _SDT_ASM_ADDR .4byte -#endif - -/* The ia64 and s390 nop instructions take an argument. */ -#if defined(__ia64__) || defined(__s390__) || defined(__s390x__) -#define _SDT_NOP nop 0 -#else -#define _SDT_NOP nop -#endif - -#define _SDT_NOTE_NAME "stapsdt" -#define _SDT_NOTE_TYPE 3 - -/* If the assembler supports the necessary feature, then we can play - nice with code in COMDAT sections, which comes up in C++ code. - Without that assembler support, some combinations of probe placements - in certain kinds of C++ code may produce link-time errors. */ -#include "sdt-config.h" -#if _SDT_ASM_SECTION_AUTOGROUP_SUPPORT -# define _SDT_ASM_AUTOGROUP "?" -#else -# define _SDT_ASM_AUTOGROUP "" -#endif - -#define _SDT_ASM_BODY(provider, name, pack_args, args) \ - _SDT_ASM_1(990: _SDT_NOP) \ - _SDT_ASM_3( .pushsection .note.stapsdt,_SDT_ASM_AUTOGROUP,"note") \ - _SDT_ASM_1( .balign 4) \ - _SDT_ASM_3( .4byte 992f-991f, 994f-993f, _SDT_NOTE_TYPE) \ - _SDT_ASM_1(991: .asciz _SDT_NOTE_NAME) \ - _SDT_ASM_1(992: .balign 4) \ - _SDT_ASM_1(993: _SDT_ASM_ADDR 990b) \ - _SDT_ASM_1( _SDT_ASM_ADDR _.stapsdt.base) \ - _SDT_SEMAPHORE(provider,name) \ - _SDT_ASM_STRING(provider) \ - _SDT_ASM_STRING(name) \ - pack_args args \ - _SDT_ASM_1(994: .balign 4) \ - _SDT_ASM_1( .popsection) - -#define _SDT_ASM_BASE \ - _SDT_ASM_1(.ifndef _.stapsdt.base) \ - _SDT_ASM_5( .pushsection .stapsdt.base,"aG","progbits", \ - .stapsdt.base,comdat) \ - _SDT_ASM_1( .weak _.stapsdt.base) \ - _SDT_ASM_1( .hidden _.stapsdt.base) \ - _SDT_ASM_1( _.stapsdt.base: .space 1) \ - _SDT_ASM_2( .size _.stapsdt.base, 1) \ - _SDT_ASM_1( .popsection) \ - _SDT_ASM_1(.endif) - -#if defined _SDT_HAS_SEMAPHORES -#define _SDT_SEMAPHORE(p,n) _SDT_ASM_1( _SDT_ASM_ADDR p##_##n##_semaphore) -#else -#define _SDT_SEMAPHORE(p,n) _SDT_ASM_1( _SDT_ASM_ADDR 0) -#endif - -#define _SDT_ASM_TEMPLATE_0 /* no arguments */ -#define _SDT_ASM_TEMPLATE_1 _SDT_ARGFMT(1) -#define _SDT_ASM_TEMPLATE_2 _SDT_ASM_TEMPLATE_1 _SDT_ARGFMT(2) -#define _SDT_ASM_TEMPLATE_3 _SDT_ASM_TEMPLATE_2 _SDT_ARGFMT(3) -#define _SDT_ASM_TEMPLATE_4 _SDT_ASM_TEMPLATE_3 _SDT_ARGFMT(4) -#define _SDT_ASM_TEMPLATE_5 _SDT_ASM_TEMPLATE_4 _SDT_ARGFMT(5) -#define _SDT_ASM_TEMPLATE_6 _SDT_ASM_TEMPLATE_5 _SDT_ARGFMT(6) -#define _SDT_ASM_TEMPLATE_7 _SDT_ASM_TEMPLATE_6 _SDT_ARGFMT(7) -#define _SDT_ASM_TEMPLATE_8 _SDT_ASM_TEMPLATE_7 _SDT_ARGFMT(8) -#define _SDT_ASM_TEMPLATE_9 _SDT_ASM_TEMPLATE_8 _SDT_ARGFMT(9) -#define _SDT_ASM_TEMPLATE_10 _SDT_ASM_TEMPLATE_9 _SDT_ARGFMT(10) -#define _SDT_ASM_TEMPLATE_11 _SDT_ASM_TEMPLATE_10 _SDT_ARGFMT(11) -#define _SDT_ASM_TEMPLATE_12 _SDT_ASM_TEMPLATE_11 _SDT_ARGFMT(12) -#define _SDT_ASM_OPERANDS_0() [__sdt_dummy] "g" (0) -#define _SDT_ASM_OPERANDS_1(arg1) _SDT_ARG(1, arg1) -#define _SDT_ASM_OPERANDS_2(arg1, arg2) \ - _SDT_ASM_OPERANDS_1(arg1), _SDT_ARG(2, arg2) -#define _SDT_ASM_OPERANDS_3(arg1, arg2, arg3) \ - _SDT_ASM_OPERANDS_2(arg1, arg2), _SDT_ARG(3, arg3) -#define _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4) \ - _SDT_ASM_OPERANDS_3(arg1, arg2, arg3), _SDT_ARG(4, arg4) -#define _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5) \ - _SDT_ASM_OPERANDS_4(arg1, arg2, arg3, arg4), _SDT_ARG(5, arg5) -#define _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6) \ - _SDT_ASM_OPERANDS_5(arg1, arg2, arg3, arg4, arg5), _SDT_ARG(6, arg6) -#define _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7) \ - _SDT_ASM_OPERANDS_6(arg1, arg2, arg3, arg4, arg5, arg6), _SDT_ARG(7, arg7) -#define _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) \ - _SDT_ASM_OPERANDS_7(arg1, arg2, arg3, arg4, arg5, arg6, arg7), \ - _SDT_ARG(8, arg8) -#define _SDT_ASM_OPERANDS_9(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9) \ - _SDT_ASM_OPERANDS_8(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8), \ - _SDT_ARG(9, arg9) -#define _SDT_ASM_OPERANDS_10(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \ - _SDT_ASM_OPERANDS_9(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9), \ - _SDT_ARG(10, arg10) -#define _SDT_ASM_OPERANDS_11(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \ - _SDT_ASM_OPERANDS_10(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10), \ - _SDT_ARG(11, arg11) -#define _SDT_ASM_OPERANDS_12(arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \ - _SDT_ASM_OPERANDS_11(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10, arg11), \ - _SDT_ARG(12, arg12) - -/* These macros can be used in C, C++, or assembly code. - In assembly code the arguments should use normal assembly operand syntax. */ - -#define STAP_PROBE(provider, name) \ - _SDT_PROBE(provider, name, 0, ()) -#define STAP_PROBE1(provider, name, arg1) \ - _SDT_PROBE(provider, name, 1, (arg1)) -#define STAP_PROBE2(provider, name, arg1, arg2) \ - _SDT_PROBE(provider, name, 2, (arg1, arg2)) -#define STAP_PROBE3(provider, name, arg1, arg2, arg3) \ - _SDT_PROBE(provider, name, 3, (arg1, arg2, arg3)) -#define STAP_PROBE4(provider, name, arg1, arg2, arg3, arg4) \ - _SDT_PROBE(provider, name, 4, (arg1, arg2, arg3, arg4)) -#define STAP_PROBE5(provider, name, arg1, arg2, arg3, arg4, arg5) \ - _SDT_PROBE(provider, name, 5, (arg1, arg2, arg3, arg4, arg5)) -#define STAP_PROBE6(provider, name, arg1, arg2, arg3, arg4, arg5, arg6) \ - _SDT_PROBE(provider, name, 6, (arg1, arg2, arg3, arg4, arg5, arg6)) -#define STAP_PROBE7(provider, name, arg1, arg2, arg3, arg4, arg5, arg6, arg7) \ - _SDT_PROBE(provider, name, 7, (arg1, arg2, arg3, arg4, arg5, arg6, arg7)) -#define STAP_PROBE8(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8) \ - _SDT_PROBE(provider, name, 8, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8)) -#define STAP_PROBE9(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9)\ - _SDT_PROBE(provider, name, 9, (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9)) -#define STAP_PROBE10(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10) \ - _SDT_PROBE(provider, name, 10, \ - (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10)) -#define STAP_PROBE11(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11) \ - _SDT_PROBE(provider, name, 11, \ - (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11)) -#define STAP_PROBE12(provider,name,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12) \ - _SDT_PROBE(provider, name, 12, \ - (arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9,arg10,arg11,arg12)) - -/* This STAP_PROBEV macro can be used in variadic scenarios, where the - number of probe arguments is not known until compile time. Since - variadic macro support may vary with compiler options, you must - pre-#define SDT_USE_VARIADIC to enable this type of probe. - - The trick to count __VA_ARGS__ was inspired by this post by - Laurent Deniau <laurent.deniau@cern.ch>: - http://groups.google.com/group/comp.std.c/msg/346fc464319b1ee5 - - Note that our _SDT_NARG is called with an extra 0 arg that's not - counted, so we don't have to worry about the behavior of macros - called without any arguments. */ - -#ifdef SDT_USE_VARIADIC -#define _SDT_NARG(...) __SDT_NARG(__VA_ARGS__, 12,11,10,9,8,7,6,5,4,3,2,1,0) -#define __SDT_NARG(_0,_1,_2,_3,_4,_5,_6,_7,_8,_9,_10,_11,_12, N, ...) N -#define _SDT_PROBE_N(provider, name, N, ...) \ - _SDT_PROBE(provider, name, N, (__VA_ARGS__)) -#define STAP_PROBEV(provider, name, ...) \ - _SDT_PROBE_N(provider, name, _SDT_NARG(0, ##__VA_ARGS__), ##__VA_ARGS__) -#endif - -/* These macros are for use in asm statements. You must compile - with -std=gnu99 or -std=c99 to use the STAP_PROBE_ASM macro. - - The STAP_PROBE_ASM macro generates a quoted string to be used in the - template portion of the asm statement, concatenated with strings that - contain the actual assembly code around the probe site. - - For example: - - asm ("before\n" - STAP_PROBE_ASM(provider, fooprobe, %eax 4(%esi)) - "after"); - - emits the assembly code for "before\nafter", with a probe in between. - The probe arguments are the %eax register, and the value of the memory - word located 4 bytes past the address in the %esi register. Note that - because this is a simple asm, not a GNU C extended asm statement, these - % characters do not need to be doubled to generate literal %reg names. - - In a GNU C extended asm statement, the probe arguments can be specified - using the macro STAP_PROBE_ASM_TEMPLATE(n) for n arguments. The paired - macro STAP_PROBE_ASM_OPERANDS gives the C values of these probe arguments, - and appears in the input operand list of the asm statement. For example: - - asm ("someinsn %0,%1\n" // %0 is output operand, %1 is input operand - STAP_PROBE_ASM(provider, fooprobe, STAP_PROBE_ASM_TEMPLATE(3)) - "otherinsn %[namedarg]" - : "r" (outvar) - : "g" (some_value), [namedarg] "i" (1234), - STAP_PROBE_ASM_OPERANDS(3, some_value, some_ptr->field, 1234)); - - This is just like writing: - - STAP_PROBE3(provider, fooprobe, some_value, some_ptr->field, 1234)); - - but the probe site is right between "someinsn" and "otherinsn". - - The probe arguments in STAP_PROBE_ASM can be given as assembly - operands instead, even inside a GNU C extended asm statement. - Note that these can use operand templates like %0 or %[name], - and likewise they must write %%reg for a literal operand of %reg. */ - -#if __STDC_VERSION__ >= 199901L -# define STAP_PROBE_ASM(provider, name, ...) \ - _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING, (__VA_ARGS__)) \ - _SDT_ASM_BASE -# define STAP_PROBE_ASM_OPERANDS(n, ...) _SDT_ASM_OPERANDS_##n(__VA_ARGS__) -#else -# define STAP_PROBE_ASM(provider, name, args) \ - _SDT_ASM_BODY(provider, name, _SDT_ASM_STRING, (args)) \ - _SDT_ASM_BASE -#endif -#define STAP_PROBE_ASM_TEMPLATE(n) _SDT_ASM_TEMPLATE_##n - - -/* DTrace compatible macro names. */ -#define DTRACE_PROBE(provider,probe) \ - STAP_PROBE(provider,probe) -#define DTRACE_PROBE1(provider,probe,parm1) \ - STAP_PROBE1(provider,probe,parm1) -#define DTRACE_PROBE2(provider,probe,parm1,parm2) \ - STAP_PROBE2(provider,probe,parm1,parm2) -#define DTRACE_PROBE3(provider,probe,parm1,parm2,parm3) \ - STAP_PROBE3(provider,probe,parm1,parm2,parm3) -#define DTRACE_PROBE4(provider,probe,parm1,parm2,parm3,parm4) \ - STAP_PROBE4(provider,probe,parm1,parm2,parm3,parm4) -#define DTRACE_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5) \ - STAP_PROBE5(provider,probe,parm1,parm2,parm3,parm4,parm5) -#define DTRACE_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6) \ - STAP_PROBE6(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6) -#define DTRACE_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7) \ - STAP_PROBE7(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7) -#define DTRACE_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8) \ - STAP_PROBE8(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8) -#define DTRACE_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9) \ - STAP_PROBE9(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9) -#define DTRACE_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10) \ - STAP_PROBE10(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10) -#define DTRACE_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11) \ - STAP_PROBE11(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11) -#define DTRACE_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12) \ - STAP_PROBE12(provider,probe,parm1,parm2,parm3,parm4,parm5,parm6,parm7,parm8,parm9,parm10,parm11,parm12) - - -#endif /* sys/sdt.h */ |