aboutsummarylogtreecommitdiffstats
path: root/config.def.h
AgeCommit message (Collapse)Author
2014-03-06Add sequence for printing the current selectionRoberto E. Vargas Caballero
This is very usefull in order to can select what is sent to the plumber.
2014-03-06Add key definition for printer sequencesRoberto E. Vargas Caballero
These new combinations generate the same behaviour (basically) of vt102. It is a good way of communicating st with other programs. [0] http://www.vt100.net/docs/vt102-ug/chapter2.html
2014-02-02Make Shift+Home equal to CLS in ascii modeRoberto E. Vargas Caballero
2014-02-02Make CONTROL + DELETE delete a lineRoberto E. Vargas Caballero
If CONTROL + INSERT inserts a line then it seems natural CONTROL + DELETE removes a line.
2014-01-31Fix SHIFT+DEL definitionRoberto E. Vargas Caballero
The AppMode and AsciiMode were inverted in the definition of this combination. Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-12-18Replace alignment tabs with spaces.Mark Edgar
2013-12-18Fix comments in config.def.h to match field names.Mark Edgar
2013-12-18Fix definition of F28 key.Mark Edgar
Shitf modifier adds 12 to the function number of the function keys, while Control adds 24, so Control + F4 generates F28
2013-10-20Ignore numlock (Mod2Mask) for button events too.Mark Edgar
Conflicts: config.def.h st.c
2013-09-12Default volume of the bell is 0.Christoph Lohmann
2013-09-12Add audible bellRoberto E. Vargas Caballero
\a is the character for bell, and st is only marking the window as urgent if it is not active. This patch adds an audible bell which can be disable with bellvolume variable. Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-09-04Correctly initialize altscreen when defaultbg is not 0.Mark Edgar
The alternate screen is not properly initialized when st starts. To see this, set defaultbg in config.h to anything other than 0 (for example, swap defaultfg and defaultbg), and run: ./st -e sh -c 'tput smcup; read' You should see that the top-left 80x24 rectangle is black (or whatever colorname[0] is), while the rest of the screen (if any) has the desired colorname[defaultbg] color. The attached patch fixes this by initializing term.c.attr in tnew() before calling tresize(). It also removes the unnecessary xcalloc() calls, which misled me on this bug hunt since it is really tclearregion() which initializes term.lines and term.alt in tresize().
2013-08-05Use character size scaling factorsEric Pruitt
The bounding boxes for characters can be scaled using "cwscale" and "chscale" to scale the width and height respectively.
2013-07-04fix: whitespaceMarkus Teich
2013-06-22fix PageUp Modifier Mask in config.def.hMarkus Teich
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2013-06-01Bumping up the xfps so mouse motion won't reap the CPU.Christoph Lohmann
2013-05-04Allow more complex delimiters for word selections.Christoph Lohmann
Thanks Alexander Rezinsky <alexrez@gmail.com>!
2013-04-28Explaining blinking for the dummies.Christoph Lohmann
2013-04-28Add a possibility to modify the string sent by mouse buttons.Christoph Lohmann
Thanks Alexander Rezinsky <alexrez@gmail.com> for the suggestion!
2013-04-26Enable blinking in st.Christoph Lohmann
2013-04-13Drawing a more visible rectangle as cursor on unfocus.Christoph Lohmann
To have a more visible cursor on unfocused windows this patch makes st draw a rectangle around the terminal cell. Thanks Mark Hills <mark@xwax.org> for the suggestion!
2013-04-03Add an option to disable alternative screens.Christoph Lohmann
2013-03-29Add the possibility to have default highlight colors.Christoph Lohmann
Thanks to stargrave@stargrave.org for the suggestion!
2013-03-29Adding PgUp + Ctrl.Christoph Lohmann
Thanks stargrave@stargrave.org!
2013-03-29Adding PgUp and PgDown + Ctrl to config.def.hChristoph Lohmann
Thanks stargrave@stargrave.org!
2013-02-23Add insert for the primary clipboard to MOD + Shift + Ins.Christoph Lohmann
Thanks Mantas Mikulėnas <grawity@gmail.com> for the patch!
2013-02-19Implement rectangular mouse selection.Christoph Lohmann
Thanks Alexander Sedov <alex0player@gmail.com>!
2013-02-16Adding a way to ignore bits in the state.Christoph Lohmann
2013-02-15The refresh rate for the action needs to be high too.Christoph Lohmann
2013-02-15Changing the fps to something reasonable high.Christoph Lohmann
2013-02-15Doing it like the new run() was proposed.Christoph Lohmann
2013-02-15Adding a more efficient drawing code.Christoph Lohmann
Thanks Mihail Zenkov <mihail.zenkov@gmail.com> for giving the hint!
2012-12-10Be careful about mar77i's patches.Christoph Lohmann
2012-12-10Applying the patch of mar771 right.Christoph Lohmann
2012-12-09Applying the change of the Del key assingment. Thanks Martti Kühne!Christoph Lohmann
2012-11-25Add support for End keyRoberto E. Vargas Caballero
- Shift + End : Delete until end of line. - Control + End : Delete until end of screen. When the End key is pressed without any modifier is not generated the correct sequence for it (going to the end of the screen), because the size of the terminal is not known, so it is not possible write a sequence for this purpouse. --- config.def.h | 10 ++++++++-- st.info | 2 ++ 2 files changed, 10 insertions(+), 2 deletions(-)
2012-11-25Add support for Supr keyRoberto E. Vargas Caballero
Del : Delete character under cursor. Shift + Del : Delete the line under cursor. Ctrl + Del: Delete the full screen. --- config.def.h | 16 ++++++++++++---- st.info | 2 ++ 2 files changed, 14 insertions(+), 4 deletions(-)
2012-11-25Add support for insert keyRoberto E. Vargas Caballero
Insert key stands for a key which allows enter or leaves insert mode, so let it generates the correct sequence to change between these modes: - Insert: Enter in insert mode. - Shift + Insert: Leave insert mode (replace mode). - Control + Insert: Insert a blank line. Like Shift + Insert also paste text, if a user want this feature be full functional he has to modify such shortcut. --- config.def.h | 16 ++++++++++++---- st.info | 3 +++ 2 files changed, 15 insertions(+), 4 deletions(-)
2012-11-25Add a notice in the config.def.h file how to obtain the syntax forChristoph Lohmann
xft/fontcache.
2012-11-25Add key for toogling numlock handlingRoberto E. Vargas Caballero
Keypad will generate keycodes when keypad application mode is enabled. It can cause problems with some programs like vi, which operates in such mode. This patch change by default don't generate the keycodes never, but this behaviour can be changed using the combination Alt + NumLock. --- config.def.h | 34 ++++++++++++++++++---------------- st.c | 17 +++++++++++++++-- 2 files changed, 33 insertions(+), 18 deletions(-)
2012-11-19Restoring the Alt + Backspace functionality. Thanks Brandon Invergo!Christoph Lohmann
2012-11-16Add application cursor sequences for HomeRoberto E. Vargas Caballero
The commit 'Fixing some key issues with mc' fix the problem where mc didn't recognize home key because the generated code and the terminfo entry were different (terminfo khome = \E[1~ but generates \033[H). Home key in ansi mode should generate the sequence CUP (\033[H) to 0,0 (home position), but it is also interesting generate a application code which identifies the key. Real vt520 only generates the ansi sequence CUP, linux console generates only the application code \033[1~, xterm generates CUP in ansi mode and \033OH in cursor application mode, rxvt only generates the application code \033[7~. This patch sets CUP in ansi mode and \033[1~ in cursor application mode, so it can be used in both modes and the application mode value is similar to near values (insert = \033[2~, Prior = \033[5~, Next = \033[6~, End = \033[4~, Supr = \033[3). --- config.def.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
2012-11-16Fixing some key issues with mc. Thanks nsz!Christoph Lohmann
2012-11-15Optimizing the key lookup to the X11 function key. It is still possible toChristoph Lohmann
remap other keys.
2012-11-15Making all function keys accessible.Christoph Lohmann
2012-11-15Adding support for XK_F35.Christoph Lohmann
2012-11-15Fixing the return and keypad enter sent characters. Terminals produce \r. AndChristoph Lohmann
some minor style changes.
2012-11-15The crlf mode was reversed.Christoph Lohmann
2012-11-15Fixing Return in non-crlf mode.Christoph Lohmann
2012-11-15Use XK_ANY_MOD instead of XK_NO_MOD in key definitionRoberto E. Vargas Caballero
Usually terminal emulators don't generate any sequence for a combination they don't have registered, for example Shift + Next, but st behavior previous to the keyboard patch generates the sequence without the modifier, in this example Next. This patch uses the XK_ANY_MOD in order to get this same behaviour. --- config.def.h | 114 ++++++++++++++++++++++++++++++---------------------------- 1 file changed, 59 insertions(+), 55 deletions(-)