aboutsummarylogtreecommitdiffstats
path: root/st.info
AgeCommit message (Collapse)Author
2014-08-07Remove ul capabilityRoberto E. Vargas Caballero
This capability indicates that underscore '_' overstrike current letter under the cursor. It means that you can generate a underline 'b' using 'b^H_', because it writes a 'b' then backward one characther and then overstrike '_'. St has not such behaviour, so it is an error to have this capability.
2014-04-11Fix Backspace and Delete charactersRoberto E. Vargas Caballero
Backspace key must generate the backspace character (\010) and Delete key must generate the delete character (\0177). In some systems the kernel configuration for erasing previous character is \0177, so some programs (for example cat, ed, mail, ...), can not understand the correct meaning of backspace. In this cases it is only needed this command: stty erase 
2014-03-06Add terminfo entries for printerRoberto E. Vargas Caballero
These capabilities inform to programs how print in local printer of the terminal.
2013-12-10Fix rmul definitionEric Pruitt
rmul means "exit underline mode", so a full reset of all the attributes is not the correct way of exiting from underline mode, because it is going to modify also another attributes not related.
2013-08-12Add terminfo definitions for terminals with meta keyRoberto E. Vargas Caballero
Some programs don't check the value of km and use smm and rmm capabilites, and they cause the terminal change to meta enabled mode even in cases where is not desirable. Allmost all people is using the terminal waiting that meta sends escape, so rmm and smm are not needed. If someone needs meta sets 8 bit he can use the correct terminfo definition in TERM.
2013-04-26Enable blinking in st.Christoph Lohmann
2013-04-23Yes, rs2 != is2.Christoph Lohmann
2013-04-23There is no 8bit by default and reset 8bit too.Christoph Lohmann
2013-04-23Implementing 8 bit mode for meta.Christoph Lohmann
2013-01-20Implementing Back Color Erase (BCE).Christoph Lohmann
2013-01-08Standout is now reverse. This makes bsd-games work in st.Christoph Lohmann
2012-11-25Add support for End keyRoberto E. Vargas Caballero
- Shift + End : Delete until end of line. - Control + End : Delete until end of screen. When the End key is pressed without any modifier is not generated the correct sequence for it (going to the end of the screen), because the size of the terminal is not known, so it is not possible write a sequence for this purpouse. --- config.def.h | 10 ++++++++-- st.info | 2 ++ 2 files changed, 10 insertions(+), 2 deletions(-)
2012-11-25Add support for Supr keyRoberto E. Vargas Caballero
Del : Delete character under cursor. Shift + Del : Delete the line under cursor. Ctrl + Del: Delete the full screen. --- config.def.h | 16 ++++++++++++---- st.info | 2 ++ 2 files changed, 14 insertions(+), 4 deletions(-)
2012-11-25Add support for insert keyRoberto E. Vargas Caballero
Insert key stands for a key which allows enter or leaves insert mode, so let it generates the correct sequence to change between these modes: - Insert: Enter in insert mode. - Shift + Insert: Leave insert mode (replace mode). - Control + Insert: Insert a blank line. Like Shift + Insert also paste text, if a user want this feature be full functional he has to modify such shortcut. --- config.def.h | 16 ++++++++++++---- st.info | 3 +++ 2 files changed, 15 insertions(+), 4 deletions(-)
2012-11-25Fix value of ka1 terminfo capabilityRoberto E. Vargas Caballero
ka1 stands for upper left of keypad, so the correct value is the one generated by Home in application keypad mode. --- st.info | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2012-11-15Import the patch of Eckehard Berns to add insert mode. Thanks!Christoph Lohmann
2012-11-13Add missed key definitionsRoberto E. Vargas Caballero
This patch adds the keys for the keypad (in both modes, application mode or ansi mode) and function keys. It uses the same convention than xterm and instead of using the XK_Fxx values it generates them using F1-F12 and modifiers. For example: F1 -> ^[OP F1 + Shift = F13 -> ^[[1;2P F1 + Control = F25 -> ^[[1;5P F1 + Mod2 = F37 -> ^[[1;6P F1 + Mod1 = F49 -> ^[[1;3P F1 + Mod3 = F61 -> ^[[1;4P It is also important notice than the terminfo capability kIC (shifted insert key) only can be generated using the keypad keyboard, because the shorcut for selection paste is using the same combination. After this path the number of elements in the Key array becomes high, and maybe a sequencial search is not enough efficient now. --- TODO | 6 +--- config.def.h | 102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- st.info | 70 ++++++++++++++++++++++++++++++++++++++-- 3 files changed, 169 insertions(+), 9 deletions(-)
2012-11-13Add control and meta combinations for arrow keysRoberto E. Vargas Caballero
Since there isn't any terminfo capability for control and meta modifiers for arrows keys it is necessary use the same that almost terminal emulators use, because there are a lot of programs which have these codes hardcoded. This cause also that shift combinations are also changed, but in this case this is not a problem since there are terminfo capabilities for them. After this patch shift-up and shift-down continue not working in emacs with TERM=st, but they work with TERM=xterm, so it is possible some other changes are necessary in the terminfo entry. --- config.def.h | 16 ++++++++++++---- st.info | 8 ++++---- 2 files changed, 16 insertions(+), 8 deletions(-)
2012-11-13Fix arrow keys terminfo capabilitiesRoberto E. Vargas Caballero
Usually the arrow keys generate the ANSI sequence which terminal will understand like a movement, so it is not necessary any dealing for them, the program can not know if the sequence is generate for a echo key or directly from the program. If you need really know if the key was pressed then you need activate the keypad mode where the keys will generate a special code for each keypad key. The terminfo capabilities kcub1, kcud1, kcuf1 and kcuu1 are used for this keypad code, not for the sequence generate in the ansi mode. --- st.info | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
2012-11-13Fix keypad mode and cursor modeRoberto E. Vargas Caballero
Keypad mode is used for detecting when keys in the auxiliary keypad are pressed, while cursor mode is used for detecting when a cursor is pressed, but they are different modes. St was mixing both modes and DECPAM and DECPNM modified the cursor mode, and this was incorrect. --- st.c | 5 +++-- st.info | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-)
2012-09-25Enabling enacs and adding compatibility to xterm and urxvt for alternativeChristoph Lohmann
charsets.
2012-09-05Implement italic font support.Christoph Lohmann
2012-09-05Enable keypad set and unset commands.Christoph Lohmann
2012-09-05Disable BCE again.Christoph Lohmann
2012-09-04Updating the TODO and enabling BCE.Christoph Lohmann
2012-09-03Fixing a type in in2 in the st.info.Christoph Lohmann
2012-09-03Patch from Roberto Vargas. »Add initialization strings in terminfo«Christoph Lohmann
Taken from the description: When tput init is executed the list of task performed are (taken from terminfo(5)): run the program iprog output is1 is2 set the margins using mgc, smgl and smgr set tabs using tbc and hts print the file if and finally output is3. When reset is executed, a more stronger initialization process is performed, so the terminal can return from an unknown state. rs1, rs2 and rs3 are used in this case instead of using is1, is2 and is3. This patch makes is2 = rs2, resets insert mode and set normal keypad mode. For rs1 it performs a full initilization using ^[c.
2012-09-02Add standout mode.Christoph Lohmann
2012-09-02Add vpa terminfo capabilityRoberto E. Vargas Caballero
--- st.info | 2 ++ 1 file changed, 2 insertions(+)
2012-08-29Adding setb and setf and a comment about terminfo installation.Christoph Lohmann
2012-08-29Add TBC sequenceRoberto E. Vargas Caballero
This sequence clears tab stops in the terminal. If the argument is not present or is zero, then removes the tab stop of the current horizontal position. If the argument is 3 then removes all the tab stops of the terminal. It was necessary modify the terminfo entry tbc, because it has \E[2g instead of the correct \E[3g. Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com> --- st.c | 12 ++++++++++++ st.info | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-)
2011-08-14change "op" cap in terminfo entry to xterm/rxvt value.Aurélien Aptel
2011-06-08add altscreen escseq alias & caps to terminfo entry. (thx Bert Münnich)Aurélien Aptel
2011-06-08reverse video mode. (thx Bert Münnich)Aurélien Aptel
2011-06-01add status bar (window title) to terminfo. (thx Rafa Gallego)Aurélien Aptel
2011-05-10add mouse report escape to terminfo entry.Aurélien Aptel
2011-04-22selection clicks, shift+arrow keys, fast(er) redraw, key mask in config.h ↵Aurélien Aptel
(thx Magnus Leuthner)
2011-01-23fix insert key, terminfo and changed TERM back to st. (thx Ondrej Martinek)Aurélien Aptel
2010-12-08update terminfo entry.Aurélien Aptel
2010-12-08add new line glitch to terminfo entry.Aurélien Aptel
2010-09-03cleaning st.info. added comment in st.c for DECSCNM.Aurélien Aptel
2010-09-03cleaning st.info. fixed cvvis.Aurélien Aptel
2010-09-02fixed start/end sequence of gfx.Aurélien Aptel
2010-09-01started to go through st.info and fix things.Aurélien Aptel
2010-09-01capabilities sorted by capname in st.info. copy acsc from xterm.Aurélien Aptel
2010-08-22added F1-12 key, fixed DCH and ICH.Aurélien Aptel
2010-08-19fixed backspace problem, updated terminfo entry and moved TNAME in config.h.Aurélien Aptel
2010-07-24applied Devin J Pohly's st color info patches, thanks Devin!Anselm R Garbe
2009-05-10backport of local changesAnselm R Garbe