--- apertium-en-es-0.8.0/Makefile.in	2011-08-03 20:23:44.000000000 +0200
+++ src/apertium-en-es-0.8.0/Makefile.in	2014-10-06 10:41:57.714504506 +0200
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,6 +15,51 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -33,10 +77,10 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.in \
-	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
-	install-sh missing
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.in COPYING install-sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -47,8 +91,25 @@
 CONFIG_HEADER = config
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -70,25 +131,59 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(apertium_en_esdir)"
 DATA = $(apertium_en_es_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ALTXSL = @ALTXSL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 APERTIUM_CFLAGS = @APERTIUM_CFLAGS@
 APERTIUM_LIBS = @APERTIUM_LIBS@
-APERTIUM_VER = @APERTIUM_VER@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -183,7 +278,7 @@
 		 $(BASENAME).$(LANG1)-lextor.dix $(BASENAME).$(LANG2)-lextor.dix \
 		 $(BASENAME).$(PREFIX1)-lextor.dix $(BASENAME).$(PREFIX2)-lextor.dix
 
-TARGETS = $(TARGETS_COMMON) 
+TARGETS = $(TARGETS_COMMON)
 EXTRA_DIST = $(BASENAME).post-$(LANG1).dix $(BASENAME).post-$(LANG2).dix \
 	   $(BASENAME).$(LANG1).tsx \
 	   $(BASENAME).$(LANG2).tsx \
@@ -221,7 +316,7 @@
 	$(MAKE) $(AM_MAKEFLAGS) all-am
 
 .SUFFIXES:
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -257,15 +352,13 @@
 $(am__aclocal_m4_deps):
 
 config: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config
-$(srcdir)/config.in:  $(am__configure_deps) 
+$(srcdir)/config.in:  $(am__configure_deps)
 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
@@ -274,8 +367,11 @@
 	-rm -f config stamp-h1
 install-apertium_en_esDATA: $(apertium_en_es_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(apertium_en_esdir)" || $(MKDIR_P) "$(DESTDIR)$(apertium_en_esdir)"
 	@list='$(apertium_en_es_DATA)'; test -n "$(apertium_en_esdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(apertium_en_esdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(apertium_en_esdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -289,15 +385,66 @@
 	@$(NORMAL_UNINSTALL)
 	@list='$(apertium_en_es_DATA)'; test -n "$(apertium_en_esdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(apertium_en_esdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(apertium_en_esdir)" && rm -f $$files
-tags: TAGS
-TAGS:
+	dir='$(DESTDIR)$(apertium_en_esdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
 
-ctags: CTAGS
-CTAGS:
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -340,36 +487,42 @@
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
 
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -380,8 +533,8 @@
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -391,17 +544,19 @@
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && ../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -424,13 +579,21 @@
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -463,10 +626,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -486,7 +654,7 @@
 distclean: distclean-am
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
 
 dvi: dvi-am
 
@@ -550,20 +718,21 @@
 
 .MAKE: all install-am install-strip
 
-.PHONY: all all-am am--refresh check check-am clean clean-generic dist \
-	dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-hdr distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-apertium_en_esDATA install-data install-data-am \
-	install-data-local install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-apertium_en_esDATA
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
+	clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
+	dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
+	dist-tarZ dist-xz dist-zip distcheck distclean \
+	distclean-generic distclean-hdr distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-apertium_en_esDATA \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-apertium_en_esDATA
 
 
 $(BASENAME).$(LANG1)-lextor.dix: $(BASENAME).$(PREFIX1).dix
@@ -604,8 +773,8 @@
 	lt-comp lr .deps/$(LANG1).dix $@ $(BASENAME).$(LANG1).acx
 
 #$(PREFIX1).automorf.bin: $(BASENAME).$(LANG1).metadix $(BASENAME).$(LANG1).acx
-#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl 	 
-#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1 
+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl
+#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1
 #	@rm tmp1gen.xsl
 #	apertium-validate-acx $(BASENAME).$(LANG1).acx
 #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp1
@@ -646,15 +815,15 @@
 	lt-comp rl .deps/$(LANG1b).dix $@
 
 #$(PREFIX2).autogen.bin: $(BASENAME).$(LANG1).metadix
-#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl 	 
+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl
 #	@xsltproc tmp2gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp2
 #	@rm tmp2gen.xsl
 #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp2
 #	lt-comp rl $(BASENAME).$(LANG1).dixtmp2 $@
 #	@rm $(BASENAME).$(LANG1).dixtmp2
 #	@rm $(BASENAME).$(LANG1).metadix
-#	@rm $(BASENAME).$(LANG2).dix	
-#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix	
+#	@rm $(BASENAME).$(LANG2).dix
+#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix
 
 $(PREFIX2).autopgen.bin: $(BASENAME).post-$(LANG1).dix
 	apertium-validate-dictionary $(BASENAME).post-$(LANG1).dix
@@ -713,13 +882,13 @@
 
 install-data-local:
 	apertium-gen-modes modes.xml apertium-$(PREFIX1)
-	$(INSTALL_DATA) $(PREFIX1).mode $(apertium_en_modesdir)
-	$(INSTALL_DATA) $(PREFIX2).mode $(apertium_en_modesdir)
-	$(INSTALL_DATA) $(PREFIX2b).mode $(apertium_en_modesdir)
-	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(apertium_en_esdir)
-	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(apertium_en_esdir)
-	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(apertium_en_esdir)
-	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(apertium_en_esdir)
+	$(INSTALL_DATA) $(PREFIX1).mode $(DESTDIR)$(apertium_en_modesdir)
+	$(INSTALL_DATA) $(PREFIX2).mode $(DESTDIR)$(apertium_en_modesdir)
+	$(INSTALL_DATA) $(PREFIX2b).mode $(DESTDIR)$(apertium_en_modesdir)
+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(DESTDIR)$(apertium_en_esdir)
+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(DESTDIR)$(apertium_en_esdir)
+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(DESTDIR)$(apertium_en_esdir)
+	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(DESTDIR)$(apertium_en_esdir)
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.