# Maintainer: graysky <graysky AT archlinux DOT us>
# Contributor: Thomas Baechler <thomas@archlinux.org>

### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them

# Tweak kernel options prior to a build via nconfig
_makenconfig=

# Optionally select a sub architecture by number if building in a clean chroot
# Leaving this entry blank will require user interaction during the build 
# which will cause a failure to build if using makechrootpkg. Note that the
# generic (default) option is 23.
#
#  1. AMD Opteron/Athlon64/Hammer/K8 (MK8)
#  2. AMD Opteron/Athlon64/Hammer/K8 with SSE3 (MK8SSE3)
#  3. AMD 61xx/7x50/PhenomX3/X4/II/K10 (MK10)
#  4. AMD Barcelona (MBARCELONA)
#  5. AMD Bobcat (MBOBCAT)
#  6. AMD Jaguar (MJAGUAR)
#  7. AMD Bulldozer (MBULLDOZER)
#  8. AMD Piledriver (MPILEDRIVER)
#  9. AMD Steamroller (MSTEAMROLLER)
#  10. AMD Excavator (MEXCAVATOR)
#  11. AMD Zen (MZEN)
#  12. Intel P4 / older Netburst based Xeon (MPSC)
#  13. Intel Atom (MATOM)
#  14. Intel Core 2 (MCORE2)
#  15. Intel Nehalem (MNEHALEM)
#  16. Intel Westmere (MWESTMERE)
#  17. Intel Silvermont (MSILVERMONT)
#  18. Intel Sandy Bridge (MSANDYBRIDGE)
#  19. Intel Ivy Bridge (MIVYBRIDGE)
#  20. Intel Haswell (MHASWELL)
#  21. Intel Broadwell (MBROADWELL)
#  22. Intel Skylake (MSKYLAKE)
#  23. Generic-x86-64 (GENERIC_CPU)
_subarch=

# Compile ONLY probed modules
# As of mainline 2.6.32, running with this option will only build the modules
# that you currently have probed in your system VASTLY reducing the number of
# modules built and the build time to do it.
#
# WARNING - ALL modules must be probed BEFORE you begin making the pkg!
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db script a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD will call it directly to probe all the modules you have logged!
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
_localmodcfg=

# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options.  NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
_use_current=

### IMPORTANT: Do no edit below this line unless you know what you're doing

pkgbase=linux-ck
_srcname=linux-4.14
pkgver=4.14.12
pkgrel=2
_ckpatchversion=1
arch=('x86_64')
url="https://wiki.archlinux.org/index.php/Linux-ck"
license=('GPL2')
makedepends=('kmod' 'inetutils' 'bc' 'libelf')
options=('!strip')
_ckpatchname="patch-4.14-ck${_ckpatchversion}"
_gcc_patch='enable_additional_cpu_optimizations_for_gcc_v4.9+_kernel_v4.13+.patch'
_preck2='https://github.com/ckolivas/linux/pull/7/commits'
source=(
  "https://www.kernel.org/pub/linux/kernel/v4.x/${_srcname}.tar.xz"
  "https://www.kernel.org/pub/linux/kernel/v4.x/${_srcname}.tar.sign"
  "https://www.kernel.org/pub/linux/kernel/v4.x/patch-${pkgver}.xz"
  "https://www.kernel.org/pub/linux/kernel/v4.x/patch-${pkgver}.sign"
  'config'         # the main kernel config file
  '60-linux.hook'  # pacman hook for depmod
  '90-linux.hook'  # pacman hook for initramfs regeneration
  'linux.preset'   # standard config files for mkinitcpio ramdisk
  "$_gcc_patch::https://raw.githubusercontent.com/graysky2/kernel_gcc_patch/master/enable_additional_cpu_optimizations_for_gcc_v4.9%2B_kernel_v4.13%2B.patch"
  "http://ck.kolivas.org/patches/4.0/4.14/4.14-ck${_ckpatchversion}/${_ckpatchname}.xz"
  # pre ck2 patches
  "$_preck2/811cb391e71c1d60387dbbd6ae0bbc4e61f06acb.patch"
  "$_preck2/6bfb805cbac27b18fb4ad7537fe90dfc39e17f35.patch"
  "$_preck2/1588e6bf316231685204e358dfe172851b39fd1e.patch"
  "$_preck2/df2a75f4864b30011ab6a6f365d9378d8eafa53b.patch"
  "$_preck2/a79d648fcde72fc98048d4435bc86864a59fd01b.patch"
  0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch
  0002-e1000e-Fix-e1000_check_for_copper_link_ich8lan-retur.patch
  0003-dccp-CVE-2017-8824-use-after-free-in-DCCP-code.patch
  0004-xfrm-Fix-stack-out-of-bounds-read-on-socket-policy-l.patch
  0005-cgroup-fix-css_task_iter-crash-on-CSS_TASK_ITER_PROC.patch
  0006-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch
)
validpgpkeys=(
  'ABAF11C65A2970B130ABE3C479BE3E4300411886'  # Linus Torvalds
  '647F28654894E3BD457199BE38DBBDC86092693E'  # Greg Kroah-Hartman
)
sha256sums=('f81d59477e90a130857ce18dc02f4fbe5725854911db1e7ba770c7cd350f96a7'
            'SKIP'
            'da5d8db44b0988e4c45346899d3f5a51f8bd6c25f14e729615ca9ff9f17bdefd'
            'SKIP'
            '67030bc59cfe1c2d57a1284905e61a03b9aaa1516e1831dd3b74528ff7999ca3'
            'ae2e95db94ef7176207c690224169594d49445e04249d2499e9d2fbc117a0b21'
            '75f99f5239e03238f88d1a834c50043ec32b1dc568f2cc291b07d04718483919'
            'ad6344badc91ad0630caacde83f7f9b97276f80d26a20619a87952be65492c65'
            '8b00041911e67654b0bd9602125853a1a94f6155c5cac4f886507554c8324ee8'
            '44d10c573112dc2b64d39ea33c2a10fbbdd84f9877b8d736acc09b2516299474'
            '24b74a975e61293cdd4ce37845a27f550102b0481017336e15df3334a82cef02'
            '453ccb01d9e56ea3a33621516f0d52568e836d1932ff14e26567cc3fe2101a17'
            'd2f59cf1c5187204eced6e53806b187e90698fcb2309955aed4020a15c659ae1'
            '3d4d2506795c4bd914959758f5b69ccf5a4f5a21f5d4bfc87bf0aa3b4b58f4c6'
            '0dbf2d23df0b5d023794332872b8b346d0c4994576b778396364e803acac4498'
            'd8a865a11665424b21fe6be9265eb287ee6d5646261a486954ddf3a4ee87e78f'
            '9251c03da9d4b64591d77f490ff144d4ba514e66e74294ada541bf827306c9c4'
            '6ce57b8dba43db4c6ee167a8891167b7d1e1e101d5112e776113eb37de5c37d8'
            '1c1f5792c98369c546840950e6569a690cd88e33d4f0931d2b0b5b88f705aa4d'
            'c3d743a0e193294bc5fbae65e7ba69fd997cd8b2ded9c9a45c5151d71d9cfb95'
            'ec7342aab478af79a17ff65cf65bbd6744b0caee8f66c77a39bba61a78e6576d')

_kernelname=${pkgbase#linux}

prepare() {
  cd ${_srcname}

  # add upstream patch
  patch -p1 -i ../patch-${pkgver}
  chmod +x tools/objtool/sync-check.sh  # GNU patch doesn't support git-style file mode

  # disable USER_NS for non-root users by default
  patch -Np1 -i ../0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch

  # https://bugs.archlinux.org/task/56575
  patch -Np1 -i ../0002-e1000e-Fix-e1000_check_for_copper_link_ich8lan-retur.patch

  # https://nvd.nist.gov/vuln/detail/CVE-2017-8824
  patch -Np1 -i ../0003-dccp-CVE-2017-8824-use-after-free-in-DCCP-code.patch

  # https://bugs.archlinux.org/task/56605
  patch -Np1 -i ../0004-xfrm-Fix-stack-out-of-bounds-read-on-socket-policy-l.patch

  # https://bugs.archlinux.org/task/56846
  patch -Np1 -i ../0005-cgroup-fix-css_task_iter-crash-on-CSS_TASK_ITER_PROC.patch

  # https://bugs.archlinux.org/task/56711
  patch -Np1 -i ../0006-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch

  # fix naming schema in EXTRAVERSION of ck patch set
  sed -i -re "s/^(.EXTRAVERSION).*$/\1 = /" "../${_ckpatchname}"

  # Patch source with ck patchset
  patch -Np1 -i "../${_ckpatchname}"
  patch -Np1 -i ../811cb391e71c1d60387dbbd6ae0bbc4e61f06acb.patch
  patch -Np1 -i ../6bfb805cbac27b18fb4ad7537fe90dfc39e17f35.patch
  patch -Np1 -i ../1588e6bf316231685204e358dfe172851b39fd1e.patch
  patch -Np1 -i ../df2a75f4864b30011ab6a6f365d9378d8eafa53b.patch
  patch -Np1 -i ../a79d648fcde72fc98048d4435bc86864a59fd01b.patch

  # Patch source to unlock additional gcc CPU optimizatons
  # https://github.com/graysky2/kernel_gcc_patch
  patch -Np1 -i "../${_gcc_patch}"

  # Clean tree and copy ARCH config over
  make mrproper

  cp -Tf ../config .config

  # NUMA is optimized for multi-socket motherboards. A single multi-core CPU can
  # actually run slower with NUMA enabled.
  # See, https://bugs.archlinux.org/task/31187
  sed -i -e 's/CONFIG_NUMA=y/# CONFIG_NUMA is not set/' \
    -i -e '/CONFIG_AMD_NUMA=y/d' \
    -i -e '/CONFIG_X86_64_ACPI_NUMA=y/d' \
    -i -e '/CONFIG_NODES_SPAN_OTHER_NODES=y/d' \
    -i -e '/# CONFIG_NUMA_EMU is not set/d' \
    -i -e '/CONFIG_NODES_SHIFT=6/d' \
    -i -e '/CONFIG_NEED_MULTIPLE_NODES=y/d' \
    -i -e '/# CONFIG_MOVABLE_NODE is not set/d' \
    -i -e '/CONFIG_USE_PERCPU_NUMA_NODE_ID=y/d' \
    -i -e '/CONFIG_ACPI_NUMA=y/d' ./.config

  ### Optionally use running kernel's config
  # code originally by nous; http://aur.archlinux.org/packages.php?ID=40191
  if [ -n "$_use_current" ]; then
    if [[ -s /proc/config.gz ]]; then
      msg "Extracting config from /proc/config.gz..."
      # modprobe configs
      zcat /proc/config.gz > ./.config
    else
      warning "Your kernel was not compiled with IKCONFIG_PROC!"
      warning "You cannot read the current config!"
      warning "Aborting!"
      exit
    fi
  fi

  if [ "${_kernelname}" != "" ]; then
    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
    sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
  fi

  # set extraversion to pkgrel
  sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile

  # don't run depmod on 'make install'. We'll do this ourselves in packaging
  sed -i '2iexit 0' scripts/depmod.sh

  # get kernel version
  if [ -n "${_subarch}" ]; then
    yes "$_subarch" | make oldconfig
  else
    make prepare
  fi

  ### Optionally load needed modules for the make localmodconfig
  # See https://aur.archlinux.org/packages/modprobed-db
    if [ -n "$_localmodcfg" ]; then
    msg "If you have modprobed-db installed, running it in recall mode now"
    if [ -e /usr/bin/modprobed-db ]; then
      [[ -x /usr/bin/sudo ]] || {
      echo "Cannot call modprobe with sudo. Install sudo and configure it to work with this user."
      exit 1; }
      sudo /usr/bin/modprobed-db recall
    fi
    msg "Running Steven Rostedt's make localmodconfig now"
    make localmodconfig
  fi

  [[ -z "$_makenconfig" ]] || make nconfig

  # rewrite configuration
  yes "" | make config >/dev/null

  # save configuration for later reuse
  cat .config > "${startdir}/config.last"
}

build() {
  cd ${_srcname}

  make ${MAKEFLAGS} LOCALVERSION= bzImage modules
}

_package() {
  pkgdesc="The ${pkgbase/linux/Linux} kernel and modules with the ck1 patchset featuring MuQSS CPU scheduler v0.162"
  #_Kpkgdesc="The ${pkgbase/linux/Linux} kernel and modules with the ck1 patchset featuring MuQSS CPU scheduler v0.162"
  #pkgdesc="${_Kpkgdesc}"
  depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
  optdepends=('crda: to set the correct wireless channels of your country')
  provides=("linux-ck=${pkgver}")
  backup=("etc/mkinitcpio.d/${pkgbase}.preset")
  install=linux.install
  #groups=('ck-generic')

  cd ${_srcname}

  # get kernel version
  _kernver="$(make LOCALVERSION= kernelrelease)"
  _basekernel=${_kernver%%-*}
  _basekernel=${_basekernel%.*}

  mkdir -p "${pkgdir}"/{boot,usr/lib/modules}
  make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}/usr" modules_install
  cp arch/x86/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"

  # make room for external modules
  local _extramodules="extramodules-${_basekernel}${_kernelname:--ARCH}"
  ln -s "../${_extramodules}" "${pkgdir}/usr/lib/modules/${_kernver}/extramodules"

  # add real version for building modules and running depmod from hook
  echo "${_kernver}" |
    install -Dm644 /dev/stdin "${pkgdir}/usr/lib/modules/${_extramodules}/version"

  # remove build and source links
  rm "${pkgdir}"/usr/lib/modules/${_kernver}/{source,build}

  # now we call depmod...
  depmod -b "${pkgdir}/usr" -F System.map "${_kernver}"

  # add vmlinux
  install -Dt "${pkgdir}/usr/lib/modules/${_kernver}/build" -m644 vmlinux

  # sed expression for following substitutions
  local _subst="
    s|%PKGBASE%|${pkgbase}|g
    s|%KERNVER%|${_kernver}|g
    s|%EXTRAMODULES%|${_extramodules}|g
  "

  # hack to allow specifying an initially nonexisting install file
  sed "${_subst}" "${startdir}/${install}" > "${startdir}/${install}.pkg"
  true && install=${install}.pkg

  # install mkinitcpio preset file
  sed "${_subst}" ../linux.preset |
    install -Dm644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"

  # install pacman hooks
  sed "${_subst}" ../60-linux.hook |
    install -Dm644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/60-${pkgbase}.hook"
  sed "${_subst}" ../90-linux.hook |
    install -Dm644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/90-${pkgbase}.hook"
}

_package-headers() {
  pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
  #_Hpkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
  #pkgdesc="${_Hpkgdesc}"
  depends=('linux-ck') # added to keep kernel and headers packages matched
  provides=("linux-ck-headers=${pkgver}" "linux-headers=${pkgver}")
  #groups=('ck-generic')

  cd ${_srcname}
  local _builddir="${pkgdir}/usr/lib/modules/${_kernver}/build"

  install -Dt "${_builddir}" -m644 Makefile .config Module.symvers
  install -Dt "${_builddir}/kernel" -m644 kernel/Makefile

  mkdir "${_builddir}/.tmp_versions"

  cp -t "${_builddir}" -a include scripts

  install -Dt "${_builddir}/arch/x86" -m644 arch/x86/Makefile
  install -Dt "${_builddir}/arch/x86/kernel" -m644 arch/x86/kernel/asm-offsets.s

  cp -t "${_builddir}/arch/x86" -a arch/x86/include

  install -Dt "${_builddir}/drivers/md" -m644 drivers/md/*.h
  install -Dt "${_builddir}/net/mac80211" -m644 net/mac80211/*.h

  # http://bugs.archlinux.org/task/9912
  install -Dt "${_builddir}/drivers/media/dvb-core" -m644 drivers/media/dvb-core/*.h

  # http://bugs.archlinux.org/task/13146
  install -Dt "${_builddir}/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h

  # http://bugs.archlinux.org/task/20402
  install -Dt "${_builddir}/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h
  install -Dt "${_builddir}/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h
  install -Dt "${_builddir}/drivers/media/tuners" -m644 drivers/media/tuners/*.h

  # add xfs and shmem for aufs building
  mkdir -p "${_builddir}"/{fs/xfs,mm}

  # copy in Kconfig files
  find . -name Kconfig\* -exec install -Dm644 {} "${_builddir}/{}" \;

  # add objtool for external module building and enabled VALIDATION_STACK option
  install -Dt "${_builddir}/tools/objtool" tools/objtool/objtool

  # remove unneeded architectures
  local _arch
  for _arch in "${_builddir}"/arch/*/; do
    [[ ${_arch} == */x86/ ]] && continue
    rm -r "${_arch}"
  done

  # remove files already in linux-docs package
  rm -r "${_builddir}/Documentation"

  # Fix permissions
  chmod -R u=rwX,go=rX "${_builddir}"

  # strip scripts directory
  local _binary _strip
  while read -rd '' _binary; do
    case "$(file -bi "${_binary}")" in
      *application/x-sharedlib*)  _strip="${STRIP_SHARED}"   ;; # Libraries (.so)
      *application/x-archive*)    _strip="${STRIP_STATIC}"   ;; # Libraries (.a)
      *application/x-executable*) _strip="${STRIP_BINARIES}" ;; # Binaries
      *) continue ;;
    esac
    /usr/bin/strip ${_strip} "${_binary}"
  done < <(find "${_builddir}/scripts" -type f -perm -u+w -print0 2>/dev/null)
}

pkgname=("${pkgbase}" "${pkgbase}-headers")
for _p in ${pkgname[@]}; do
  eval "package_${_p}() {
    $(declare -f "_package${_p#${pkgbase}}")
    _package${_p#${pkgbase}}
  }"
done

# vim:set ts=8 sts=2 sw=2 et: