# Maintainer: graysky <graysky AT archlinux DOT us>
# Contributor: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>

### BUILD OPTIONS
# Set the next two variables to ANYTHING that is not null to enable them

# Tweak kernel options prior to a build via nconfig
_makenconfig=

# Only compile select modules to reduce the number of modules built
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD reads the database kept if it exists
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
_localmodcfg=

# Optionally select a sub architecture by number or leave blank which will
# require user interaction during the build. Note that the generic (default)
# option is 36.
#
#  1. AMD Opteron/Athlon64/Hammer/K8 (MK8)
#  2. AMD Opteron/Athlon64/Hammer/K8 with SSE3 (MK8SSE3) (NEW)
#  3. AMD 61xx/7x50/PhenomX3/X4/II/K10 (MK10) (NEW)
#  4. AMD Barcelona (MBARCELONA) (NEW)
#  5. AMD Bobcat (MBOBCAT) (NEW)
#  6. AMD Jaguar (MJAGUAR) (NEW)
#  7. AMD Bulldozer (MBULLDOZER) (NEW)
#  8. AMD Piledriver (MPILEDRIVER) (NEW)
#  9. AMD Steamroller (MSTEAMROLLER) (NEW)
#  10. AMD Excavator (MEXCAVATOR) (NEW)
#  11. AMD Zen (MZEN) (NEW)
#  12. AMD Zen 2 (MZEN2) (NEW)
#  13. AMD Zen 3 (MZEN3) (NEW)
#  14. Intel P4 / older Netburst based Xeon (MPSC)
#  15. Intel Core 2 (MCORE2)
#  16. Intel Atom (MATOM)
#  17. Intel Nehalem (MNEHALEM) (NEW)
#  18. Intel Westmere (MWESTMERE) (NEW)
#  19. Intel Silvermont (MSILVERMONT) (NEW)
#  20. Intel Goldmont (MGOLDMONT) (NEW)
#  21. Intel Goldmont Plus (MGOLDMONTPLUS) (NEW)
#  22. Intel Sandy Bridge (MSANDYBRIDGE) (NEW)
#  23. Intel Ivy Bridge (MIVYBRIDGE) (NEW)
#  24. Intel Haswell (MHASWELL) (NEW)
#  25. Intel Broadwell (MBROADWELL) (NEW)
#  26. Intel Skylake (MSKYLAKE) (NEW)
#  27. Intel Skylake X (MSKYLAKEX) (NEW)
#  28. Intel Cannon Lake (MCANNONLAKE) (NEW)
#  29. Intel Ice Lake (MICELAKE) (NEW)
#  30. Intel Cascade Lake (MCASCADELAKE) (NEW)
#  31. Intel Cooper Lake (MCOOPERLAKE) (NEW)
#  32. Intel Tiger Lake (MTIGERLAKE) (NEW)
#  33. Intel Sapphire Rapids (MSAPPHIRERAPIDS) (NEW)
#  34. Intel Rocket Lake (MROCKETLAKE) (NEW)
#  35. Intel Alder Lake (MALDERLAKE) (NEW)
#  36. Generic-x86-64 (GENERIC_CPU)
#  37. Generic-x86-64-v2 (GENERIC_CPU2) (NEW)
#  38. Generic-x86-64-v3 (GENERIC_CPU3) (NEW)
#  39. Generic-x86-64-v4 (GENERIC_CPU4) (NEW)
#  40. Intel-Native optimizations autodetected by GCC (MNATIVE_INTEL) (NEW)
#  41. AMD-Native optimizations autodetected by GCC (MNATIVE_AMD) (NEW)
_subarch=

### IMPORTANT: Do no edit below this line unless you know what you're doing
pkgbase=linux-ck
pkgver=5.15.11
pkgrel=1
arch=(x86_64)
url="https://wiki.archlinux.org/index.php/Linux-ck"
license=(GPL2)
makedepends=(
  bc kmod libelf        cpio perl tar xz
)
options=('!strip')

# https://ck-hack.blogspot.com/2021/08/514-and-future-of-muqss-and-ck-once.html
# thankfully xanmod keeps the hrtimer patches up to date
_commit=8ba6612318090567422d49ccc79bc7bbe5484cfc
_xan=linux-5.15.y-xanmod

_gcc_more_v=20211114
source=(
  "https://www.kernel.org/pub/linux/kernel/v5.x/linux-$pkgver.tar".{xz,sign}
  config         # the main kernel config file
  "more-uarches-$_gcc_more_v.tar.gz::https://github.com/graysky2/kernel_compiler_patch/archive/$_gcc_more_v.tar.gz"
  "xanmod-patches-from-ck-$_commit.tar.gz::https://github.com/xanmod/linux-patches/archive/$_commit.tar.gz"
  0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch
  0002-PCI-Add-more-NVIDIA-controllers-to-the-MSI-masking-q.patch
  0003-iommu-intel-do-deep-dma-unmapping-to-avoid-kernel-fl.patch
  0004-cpufreq-intel_pstate-ITMT-support-for-overclocked-sy.patch
  0005-Bluetooth-btintel-Fix-bdaddress-comparison-with-garb.patch
  0006-lg-laptop-Recognize-more-models.patch
  0007-HID-holtek-fix-mouse-probing.patch
)
validpgpkeys=(
  'ABAF11C65A2970B130ABE3C479BE3E4300411886'  # Linus Torvalds
  '647F28654894E3BD457199BE38DBBDC86092693E'  # Greg Kroah-Hartman
)
b2sums=('37a264e50069e5b195b99a355944893e42c6fc05eb5fef7907855de4d31c693421e6fc578575ed141534b52ab9105dfd7697bdfec238cfa88e16a6c41f138ebd'
        'SKIP'
        '28f0bb1cba1ce9b5c92e3a140b57789474cb3de3c9ae16d1fbdd96ec0cd43bfdbc3273890cf26329eddc0b6d07e56c4b0920418886480e70619f84b8a67e692d'
        '534091fb5034226d48f18da2114305860e67ee49a1d726b049a240ce61df83e840a9a255e5b8fa9279ec07dd69fb0aea6e2e48962792c2b5367db577a4423d8d'
        'cf589ec357a96b9e573bce298bb1d64fa50339ea047767f2a730a8dc9808e2316b3e7c885d730233ba50d570725d4c72632d1b74a371ef02ac471d4c944fe63e'
        'b830684472b4c8865f2041268aab1d0a84b07ca542c157901f668896e23816f268b79cbac1953d087cdf227f55bb3f312f19598f1c6de0ead32b77fdce8f618a'
        'd98bf61e26e595deba649201787dd02b94a89ff0564c61555c569c59946ffc476932d46fd6fd23c7761fae3498bb412d61ca29a890b09d51e87e065cf0326ced'
        '7be28283d5789cdf97e9cb56d9ec4c85c97f0df11d13ea438b29c2cafa7053074ffc7369b5f946d54c09b2d246423f29bce228469bc7fc483e3e0f9340edcc5e'
        '32b7af5143c512f2e5a7ad015a61d23c8bc30649fdb58cfc74d95e564a8edd9b55dc82ce9bf02e10b38d8f18cd74c1027d5178f6fc08b32a8c267bc3da0805e1'
        '5e2d8ece3e159266d6ebd7c1a9c89778beba238de770911048a7e3c02ed0a7f9647ce09fb91f13ded859aa1d4f805a3adcdf55ee6fa6c20bc0ac40ef326662f2'
        '7d19c161bfe68d6d6a8889cee1a089c573d4618501d09bd4e2284aebff794c64b4b14a58f8034b71b63a5d88014ad289b8791cb4fb7f6c25d1749e09b0050009'
        '41ea8f78dff2ab66aa576fcb8c3ae4f1ce8c7a9a5f9c0c77993572dba040000a0755ef61f073c79610a33e609fa30402ee5726a7f46f58d26b9aba29595114f6')

export KBUILD_BUILD_HOST=archlinux
export KBUILD_BUILD_USER=$pkgbase
export KBUILD_BUILD_TIMESTAMP="$(date -Ru${SOURCE_DATE_EPOCH:+d @$SOURCE_DATE_EPOCH})"

prepare() {
  cd linux-${pkgver}

  echo "Setting version..."
  scripts/setlocalversion --save-scmversion
  echo "-$pkgrel" > localversion.10-pkgrel
  echo "${pkgbase#linux}" > localversion.20-pkgname

  local src
  for src in "${source[@]}"; do
    src="${src%%::*}"
    src="${src##*/}"
    [[ $src = 0*.patch ]] || continue
    echo "Applying patch $src..."
    patch -Np1 < "../$src"
  done

  echo "Setting config..."
  cp ../config .config

  # disable CONFIG_DEBUG_INFO=y at build time otherwise memory usage blows up
  # and can easily overwhelm a system with 32 GB of memory using a tmpfs build
  # partition ... this was introduced by FS#66260, see:
  # https://git.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/linux&id=663b08666b269eeeeaafbafaee07fd03389ac8d7
  scripts/config --disable CONFIG_DEBUG_INFO
  scripts/config --disable CONFIG_CGROUP_BPF
  scripts/config --disable CONFIG_BPF_LSM
  scripts/config --disable CONFIG_BPF_PRELOAD
  scripts/config --disable CONFIG_BPF_LIRC_MODE2
  scripts/config --disable CONFIG_BPF_KPROBE_OVERRIDE

  # https://bbs.archlinux.org/viewtopic.php?pid=1824594#p1824594
  scripts/config --enable CONFIG_PSI_DEFAULT_DISABLED

  # https://bbs.archlinux.org/viewtopic.php?pid=1863567#p1863567
  scripts/config --disable CONFIG_LATENCYTOP
  scripts/config --disable CONFIG_SCHED_DEBUG

  # FS#66613
  # https://bugzilla.kernel.org/show_bug.cgi?id=207173#c6
  scripts/config --disable CONFIG_KVM_WERROR
  
  # ck recommends 1000 Hz tick and the hrtimer patches in lieu of ck1
  scripts/config --enable CONFIG_HZ_1000

  # these are ck's htrimer patches
  echo "Patching with ck hrtimer patches..."

  for i in ../linux-patches-"$_commit"/"$_xan"/ck-hrtimer/0*.patch; do
    patch -Np1 -i $i
  done

  # non-interactively apply ck1 default options
  # this isn't redundant if we want a clean selection of subarch below
  make olddefconfig
  diff -u ../config .config || :

  # https://github.com/graysky2/kernel_gcc_patch
  # make sure to apply after olddefconfig to allow the next section
  echo "Patching to enable GCC optimization for other uarchs..."
  patch -Np1 -i "$srcdir/kernel_compiler_patch-$_gcc_more_v/more-uarches-for-kernel-5.15+.patch"

  if [ -n "$_subarch" ]; then
    # user wants a subarch so apply choice defined above interactively via 'yes'
    yes "$_subarch" | make oldconfig
  else
    # no subarch defined so allow user to pick one
    make oldconfig
  fi

  ### Optionally load needed modules for the make localmodconfig
  # See https://aur.archlinux.org/packages/modprobed-db
    if [ -n "$_localmodcfg" ]; then
      if [ -f $HOME/.config/modprobed.db ]; then
        echo "Running Steven Rostedt's make localmodconfig now"
        make LSMOD=$HOME/.config/modprobed.db localmodconfig
      else
        echo "No modprobed.db data found"
        exit
      fi
    fi

  make -s kernelrelease > version
  echo "Prepared $pkgbase version $(<version)"

  [[ -z "$_makenconfig" ]] || make nconfig

  # save configuration for later reuse
  cat .config > "${startdir}/config.last"

  # uncomment if you want to build with distcc
  ### sed -i '/HAVE_GCC_PLUGINS/d' arch/x86/Kconfig
}

build() {
  cd linux-${pkgver}
  make all
}

_package() {
  pkgdesc="The ${pkgbase/linux/Linux} kernel and modules with ck's hrtimer patches"
  depends=(coreutils kmod initramfs)
  optdepends=('crda: to set the correct wireless channels of your country'
              'linux-firmware: firmware images needed for some devices')
  provides=(VIRTUALBOX-GUEST-MODULES WIREGUARD-MODULE)
  #groups=('ck-generic')

  cd linux-${pkgver}

  local kernver="$(<version)"
  local modulesdir="$pkgdir/usr/lib/modules/$kernver"

  echo "Installing boot image..."
  # systemd expects to find the kernel here to allow hibernation
  # https://github.com/systemd/systemd/commit/edda44605f06a41fb86b7ab8128dcf99161d2344
  #install -Dm644 "$(make -s image_name)" "$modulesdir/vmlinuz"
  #
  # hard-coded path in case user defined CC=xxx for build which causes errors
  # see this FS https://bugs.archlinux.org/task/64315
  install -Dm644 arch/x86/boot/bzImage "$modulesdir/vmlinuz"

  # Used by mkinitcpio to name the kernel
  echo "$pkgbase" | install -Dm644 /dev/stdin "$modulesdir/pkgbase"

  echo "Installing modules..."
  #make INSTALL_MOD_PATH="$pkgdir/usr" INSTALL_MOD_STRIP=1 modules_install
  # not needed since not building with CONFIG_DEBUG_INFO=y

  make INSTALL_MOD_PATH="$pkgdir/usr" modules_install

  # remove build and source links
  rm "$modulesdir"/{source,build}
}

_package-headers() {
  pkgdesc="Headers and scripts for building modules for ${pkgbase/linux/Linux} kernel"
  depends=("$pkgbase") # added to keep kernel and headers packages matched
  #groups=('ck-generic')

  cd linux-${pkgver}
  local builddir="$pkgdir/usr/lib/modules/$(<version)/build"

  echo "Installing build files..."
  install -Dt "$builddir" -m644 .config Makefile Module.symvers System.map \
    localversion.* version vmlinux
  install -Dt "$builddir/kernel" -m644 kernel/Makefile
  install -Dt "$builddir/arch/x86" -m644 arch/x86/Makefile
  cp -t "$builddir" -a scripts

  # add objtool for external module building and enabled VALIDATION_STACK option
  install -Dt "$builddir/tools/objtool" tools/objtool/objtool

  # add xfs and shmem for aufs building
  mkdir -p "$builddir"/{fs/xfs,mm}

  echo "Installing headers..."
  cp -t "$builddir" -a include
  cp -t "$builddir/arch/x86" -a arch/x86/include
  install -Dt "$builddir/arch/x86/kernel" -m644 arch/x86/kernel/asm-offsets.s

  install -Dt "$builddir/drivers/md" -m644 drivers/md/*.h
  install -Dt "$builddir/net/mac80211" -m644 net/mac80211/*.h

  # https://bugs.archlinux.org/task/13146
  install -Dt "$builddir/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h

  # https://bugs.archlinux.org/task/20402
  install -Dt "$builddir/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h
  install -Dt "$builddir/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h
  install -Dt "$builddir/drivers/media/tuners" -m644 drivers/media/tuners/*.h

  # https://bugs.archlinux.org/task/71392
  install -Dt "$builddir/drivers/iio/common/hid-sensors" -m644 drivers/iio/common/hid-sensors/*.h

  echo "Installing KConfig files..."
  find . -name 'Kconfig*' -exec install -Dm644 {} "$builddir/{}" \;

  echo "Removing unneeded architectures..."
  local arch
  for arch in "$builddir"/arch/*/; do
    [[ $arch = */x86/ ]] && continue
    echo "Removing $(basename "$arch")"
    rm -r "$arch"
  done

  echo "Removing documentation..."
  rm -r "$builddir/Documentation"

  echo "Removing broken symlinks..."
  find -L "$builddir" -type l -printf 'Removing %P\n' -delete

  echo "Removing loose objects..."
  find "$builddir" -type f -name '*.o' -printf 'Removing %P\n' -delete

  echo "Stripping build tools..."
  local file
  while read -rd '' file; do
    case "$(file -bi "$file")" in
      application/x-sharedlib\;*)      # Libraries (.so)
        strip -v $STRIP_SHARED "$file" ;;
      application/x-archive\;*)        # Libraries (.a)
        strip -v $STRIP_STATIC "$file" ;;
      application/x-executable\;*)     # Binaries
        strip -v $STRIP_BINARIES "$file" ;;
      application/x-pie-executable\;*) # Relocatable binaries
        strip -v $STRIP_SHARED "$file" ;;
    esac
  done < <(find "$builddir" -type f -perm -u+x ! -name vmlinux -print0)

  #echo "Stripping vmlinux..."
  #strip -v $STRIP_STATIC "$builddir/vmlinux"
  # not needed since not building with CONFIG_DEBUG_INFO=y

  echo "Adding symlink..."
  mkdir -p "$pkgdir/usr/src"
  ln -sr "$builddir" "$pkgdir/usr/src/$pkgbase"

}

pkgname=("$pkgbase" "$pkgbase-headers")
for _p in "${pkgname[@]}"; do
  eval "package_$_p() {
    $(declare -f "_package${_p#$pkgbase}")
    _package${_p#$pkgbase}
  }"
done

# vim:set ts=8 sts=2 sw=2 et: