# Maintainer: graysky <therealgraysky AT protonmail DOT com>
# Contributor: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>

### BUILD OPTIONS
# Any/all of the next three variables may be set to ANYTHING
# that is not null to enable their respective build options

# Tweak kernel options prior to a build via nconfig
_makenconfig=

# Only compile select modules to reduce the number of modules built
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD reads the database kept if it exists
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
_localmodcfg=

# Compile using clang rather than gcc
_clangbuild=

# Optionally select a sub architecture by number or leave blank which will
# require user interaction during the build. Note that the generic (default)
# option is 36.
_subarch=

#  1. AMD Opteron/Athlon64/Hammer/K8 (MK8)
#  2. AMD Opteron/Athlon64/Hammer/K8 with SSE3 (MK8SSE3) (NEW)
#  3. AMD 61xx/7x50/PhenomX3/X4/II/K10 (MK10) (NEW)
#  4. AMD Barcelona (MBARCELONA) (NEW)
#  5. AMD Bobcat (MBOBCAT) (NEW)
#  6. AMD Jaguar (MJAGUAR) (NEW)
#  7. AMD Bulldozer (MBULLDOZER) (NEW)
#  8. AMD Piledriver (MPILEDRIVER) (NEW)
#  9. AMD Steamroller (MSTEAMROLLER) (NEW)
#  10. AMD Excavator (MEXCAVATOR) (NEW)
#  11. AMD Zen (MZEN) (NEW)
#  12. AMD Zen 2 (MZEN2) (NEW)
#  13. AMD Zen 3 (MZEN3) (NEW)
#  14. Intel P4 / older Netburst based Xeon (MPSC)
#  15. Intel Core 2 (MCORE2)
#  16. Intel Atom (MATOM)
#  17. Intel Nehalem (MNEHALEM) (NEW)
#  18. Intel Westmere (MWESTMERE) (NEW)
#  19. Intel Silvermont (MSILVERMONT) (NEW)
#  20. Intel Goldmont (MGOLDMONT) (NEW)
#  21. Intel Goldmont Plus (MGOLDMONTPLUS) (NEW)
#  22. Intel Sandy Bridge (MSANDYBRIDGE) (NEW)
#  23. Intel Ivy Bridge (MIVYBRIDGE) (NEW)
#  24. Intel Haswell (MHASWELL) (NEW)
#  25. Intel Broadwell (MBROADWELL) (NEW)
#  26. Intel Skylake (MSKYLAKE) (NEW)
#  27. Intel Skylake X (MSKYLAKEX) (NEW)
#  28. Intel Cannon Lake (MCANNONLAKE) (NEW)
#  29. Intel Ice Lake (MICELAKE) (NEW)
#  30. Intel Cascade Lake (MCASCADELAKE) (NEW)
#  31. Intel Cooper Lake (MCOOPERLAKE) (NEW)
#  32. Intel Tiger Lake (MTIGERLAKE) (NEW)
#  33. Intel Sapphire Rapids (MSAPPHIRERAPIDS) (NEW)
#  34. Intel Rocket Lake (MROCKETLAKE) (NEW)
#  35. Intel Alder Lake (MALDERLAKE) (NEW)
#  36. Generic-x86-64 (GENERIC_CPU)
#  37. Generic-x86-64-v2 (GENERIC_CPU2) (NEW)
#  38. Generic-x86-64-v3 (GENERIC_CPU3) (NEW)
#  39. Generic-x86-64-v4 (GENERIC_CPU4) (NEW)
#  40. Intel-Native optimizations autodetected by GCC (MNATIVE_INTEL) (NEW)
#  41. AMD-Native optimizations autodetected by GCC (MNATIVE_AMD) (NEW)

### IMPORTANT: Do no edit below this line unless you know what you're doing
pkgbase=linux-ck
pkgver=5.19.11
pkgrel=1
arch=(x86_64)
url="https://wiki.archlinux.org/index.php/Linux-ck"
license=(GPL2)
makedepends=(
  bc libelf        cpio perl tar xz
)
[[ -n "$_clangbuild" ]] && makedepends+=(clang llvm lld python)
options=('!strip')

# https://ck-hack.blogspot.com/2021/08/514-and-future-of-muqss-and-ck-once.html
# acknowledgment to xanmod for initially keeping the hrtimer patches up to date
_ckhrtimer=linux-5.19.y
_commit=9b792e6dc19ee6bd70e7c71f579f4d87ff929c60

_gcc_more_v=20220315
source=(
  "https://www.kernel.org/pub/linux/kernel/v5.x/linux-$pkgver.tar".{xz,sign}
  config         # the main kernel config file
  "more-uarches-$_gcc_more_v.tar.gz::https://github.com/graysky2/kernel_compiler_patch/archive/$_gcc_more_v.tar.gz"
  "ck-hrtimer-$_commit.tar.gz::https://github.com/graysky2/linux-patches/archive/$_commit.tar.gz"
  0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch
  0002-drm-i915-psr-Use-full-update-In-case-of-area-calcula.patch
  0003-drm-i915-Ensure-damage-clip-area-is-within-pipe-area.patch
  0004-mm-vmscan-fix-extreme-overreclaim-and-swap-floods.patch
  0005-soundwire-intel-use-pm_runtime_resume-on-component-p.patch
  0006-Bluetooth-fix-deadlock-for-RFCOMM-sk-state-change.patch
  0007-ASoC-Intel-sof_sdw-add-support-for-Dell-SKU-0AFF.patch
)
validpgpkeys=(
  'ABAF11C65A2970B130ABE3C479BE3E4300411886'  # Linus Torvalds
  '647F28654894E3BD457199BE38DBBDC86092693E'  # Greg Kroah-Hartman
)
sha256sums=('5554d2f90b806bb3454fcf3432882cf85077d660a89db5a4e8d7375271e3d973'
            'SKIP'
            '7dcbed3f72a2a84dd5b40bbe38c8fa2d82d1d68fcaa657f40163a6123a19886f'
            '5a29d172d442a3f31a402d7d306aaa292b0b5ea29139d05080a55e2425f48c5c'
            '7037fa27b33666a3bd20c888c667efb218e95e45af8debe591896cc79fe69c76'
            '85fa81ddbc48c0775f220a378348ad0d9766a03cbecd277a814cf3b579d45108'
            '5e7e99006fad5f53c575530f669e7e339d3533cdc3e38381d4fdc1b9d570d221'
            '36e19de5c004a8bc91ee82c049f40fc90d2f4902f97faf3a14e75025f2a40d13'
            '33025678ce2804ec8855537cb7801226e769c3e7d27ff9edd706de526d89686e'
            '3ad14c8a2bfbbc1a0b3a54d01d7cb9698e564cf0e8047da0ae8d6c1d20d98f36'
            '04a844a87d0cbf7a2210f59aab07ee203fdb36959d5d3f69f7f86124ee760768'
            '6c0faae6fe0c624fe80776f12b53ec917acfbc07811222c41640a3d1dfff5353')

prepare() {
  cd linux-${pkgver}

  msg2 "Setting version..."
  scripts/setlocalversion --save-scmversion
  echo "-$pkgrel" > localversion.10-pkgrel
  echo "${pkgbase#linux}" > localversion.20-pkgname

  local src
  for src in "${source[@]}"; do
    src="${src%%::*}"
    src="${src##*/}"
    [[ $src = 0*.patch ]] || continue
    echo "Applying patch $src..."
    patch -Np1 < "../$src"
  done

  echo "Setting config..."
  cp ../config .config

  # disable CONFIG_DEBUG_INFO=y at build time otherwise memory usage blows up
  # and can easily overwhelm a system with 32 GB of memory using a tmpfs build
  # partition ... this was introduced by FS#66260, see:
  # https://git.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/linux&id=663b08666b269eeeeaafbafaee07fd03389ac8d7
  scripts/config --disable CONFIG_DEBUG_INFO
  scripts/config --disable CONFIG_CGROUP_BPF
  scripts/config --disable CONFIG_BPF_LSM
  scripts/config --disable CONFIG_BPF_PRELOAD
  scripts/config --disable CONFIG_BPF_LIRC_MODE2
  scripts/config --disable CONFIG_BPF_KPROBE_OVERRIDE

  # https://bbs.archlinux.org/viewtopic.php?pid=1824594#p1824594
  scripts/config --enable CONFIG_PSI_DEFAULT_DISABLED

  # https://bbs.archlinux.org/viewtopic.php?pid=1863567#p1863567
  scripts/config --disable CONFIG_LATENCYTOP
  scripts/config --disable CONFIG_SCHED_DEBUG

  # FS#66613
  # https://bugzilla.kernel.org/show_bug.cgi?id=207173#c6
  scripts/config --disable CONFIG_KVM_WERROR

  # ck recommends 1000 Hz tick and the hrtimer patches in lieu of ck1
  scripts/config --enable CONFIG_HZ_1000

  # these are ck's htrimer patches
  echo "Patching with ck hrtimer patches..."

  for i in ../linux-patches-"$_commit"/"$_ckhrtimer"/ck-hrtimer/0*.patch; do
    patch -Np1 -i $i
  done

  if [[ -n "$_clangbuild" ]]; then
    scripts/config -e LTO_CLANG_THIN
    export _LLVM=1
    export _LLVM_IAS=$_LLVM
  fi

  # non-interactively apply ck1 default options
  # this isn't redundant if we want a clean selection of subarch below
  make LLVM=$_LLVM LLVM_IAS=$_LLVM olddefconfig
  diff -u ../config .config || :

  # https://github.com/graysky2/kernel_gcc_patch
  # make sure to apply after olddefconfig to allow the next section
  echo "Patching to enable GCC optimization for other uarchs..."
  patch -Np1 -i "$srcdir/kernel_compiler_patch-$_gcc_more_v/more-uarches-for-kernel-5.17+.patch"

  if [ -n "$_subarch" ]; then
    # user wants a subarch so apply choice defined above interactively via 'yes'
    yes "$_subarch" | make LLVM=$_LLVM LLVM_IAS=$_LLVM oldconfig
  else
    # no subarch defined so allow user to pick one
    make LLVM=$_LLVM LLVM_IAS=$_LLVM oldconfig
  fi

  ### Optionally load needed modules for the make localmodconfig
  # See https://aur.archlinux.org/packages/modprobed-db
    if [ -n "$_localmodcfg" ]; then
      if [ -f $HOME/.config/modprobed.db ]; then
        echo "Running Steven Rostedt's make localmodconfig now"
        make LLVM=$_LLVM LLVM_IAS=$_LLVM LSMOD="$HOME/.config/modprobed.db" localmodconfig
      else
        echo "No modprobed.db data found"
        exit
      fi
    fi

  make -s kernelrelease > version
  echo "Prepared $pkgbase version $(<version)"

  [[ -z "$_makenconfig" ]] || make LLVM=$_LLVM LLVM_IAS=$_LLVM nconfig

  # save configuration for later reuse
  cat .config > "${startdir}/config.last"

  # uncomment if you want to build with distcc
  ### sed -i '/HAVE_GCC_PLUGINS/d' arch/x86/Kconfig
}

build() {
  cd linux-${pkgver}
  make LLVM=$_LLVM LLVM_IAS=$_LLVM all
}

_package() {
  pkgdesc="The Linux kernel and modules with ck's hrtimer patches"
  depends=(coreutils kmod initramfs)
  optdepends=('wireless-regdb: to set the correct wireless channels of your country'
              'linux-firmware: firmware images needed for some devices')
  provides=(VIRTUALBOX-GUEST-MODULES WIREGUARD-MODULE KSMBD-MODULE)
  replaces=(virtualbox-guest-modules-arch wireguard-arch)
  #groups=('ck-generic')

  cd linux-${pkgver}

  local kernver="$(<version)"
  local modulesdir="$pkgdir/usr/lib/modules/$kernver"

  echo "Installing boot image..."
  # systemd expects to find the kernel here to allow hibernation
  # https://github.com/systemd/systemd/commit/edda44605f06a41fb86b7ab8128dcf99161d2344
  #install -Dm644 "$(make -s image_name)" "$modulesdir/vmlinuz"
  #
  # hard-coded path in case user defined CC=xxx for build which causes errors
  # see this FS https://bugs.archlinux.org/task/64315
  install -Dm644 arch/x86/boot/bzImage "$modulesdir/vmlinuz"

  # Used by mkinitcpio to name the kernel
  echo "$pkgbase" | install -Dm644 /dev/stdin "$modulesdir/pkgbase"

  echo "Installing modules..."
  make LLVM=$_LLVM LLVM_IAS=$_LLVM INSTALL_MOD_PATH="$pkgdir/usr" INSTALL_MOD_STRIP=1 \
    DEPMOD=/doesnt/exist modules_install  # Suppress depmod

  # remove build and source links
  rm "$modulesdir"/{source,build}
}

_package-headers() {
  pkgdesc="Headers and scripts for building modules for ${pkgbase/linux/Linux} kernel"
  depends=("$pkgbase") # added to keep kernel and headers packages matched
  #groups=('ck-generic')

  cd linux-${pkgver}
  local builddir="$pkgdir/usr/lib/modules/$(<version)/build"

  echo "Installing build files..."
  install -Dt "$builddir" -m644 .config Makefile Module.symvers System.map \
    localversion.* version vmlinux
  install -Dt "$builddir/kernel" -m644 kernel/Makefile
  install -Dt "$builddir/arch/x86" -m644 arch/x86/Makefile
  cp -t "$builddir" -a scripts

  # required when STACK_VALIDATION is enabled
  install -Dt "$builddir/tools/objtool" tools/objtool/objtool

  # required when DEBUG_INFO_BTF_MODULES is enabled
  #install -Dt "$builddir/tools/bpf/resolve_btfids" tools/bpf/resolve_btfids/resolve_btfids

  echo "Installing headers..."
  cp -t "$builddir" -a include
  cp -t "$builddir/arch/x86" -a arch/x86/include
  install -Dt "$builddir/arch/x86/kernel" -m644 arch/x86/kernel/asm-offsets.s

  install -Dt "$builddir/drivers/md" -m644 drivers/md/*.h
  install -Dt "$builddir/net/mac80211" -m644 net/mac80211/*.h

  # https://bugs.archlinux.org/task/13146
  install -Dt "$builddir/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h

  # https://bugs.archlinux.org/task/20402
  install -Dt "$builddir/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h
  install -Dt "$builddir/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h
  install -Dt "$builddir/drivers/media/tuners" -m644 drivers/media/tuners/*.h

  # https://bugs.archlinux.org/task/71392
  install -Dt "$builddir/drivers/iio/common/hid-sensors" -m644 drivers/iio/common/hid-sensors/*.h

  echo "Installing KConfig files..."
  find . -name 'Kconfig*' -exec install -Dm644 {} "$builddir/{}" \;

  echo "Removing unneeded architectures..."
  local arch
  for arch in "$builddir"/arch/*/; do
    [[ $arch = */x86/ ]] && continue
    echo "Removing $(basename "$arch")"
    rm -r "$arch"
  done

  echo "Removing documentation..."
  rm -r "$builddir/Documentation"

  echo "Removing broken symlinks..."
  find -L "$builddir" -type l -printf 'Removing %P\n' -delete

  echo "Removing loose objects..."
  find "$builddir" -type f -name '*.o' -printf 'Removing %P\n' -delete

  echo "Stripping build tools..."
  local file
  while read -rd '' file; do
    case "$(file -bi "$file")" in
      application/x-sharedlib\;*)      # Libraries (.so)
        strip -v $STRIP_SHARED "$file" ;;
      application/x-archive\;*)        # Libraries (.a)
        strip -v $STRIP_STATIC "$file" ;;
      application/x-executable\;*)     # Binaries
        strip -v $STRIP_BINARIES "$file" ;;
      application/x-pie-executable\;*) # Relocatable binaries
        strip -v $STRIP_SHARED "$file" ;;
    esac
  done < <(find "$builddir" -type f -perm -u+x ! -name vmlinux -print0)

  echo "Stripping vmlinux..."
  strip -v $STRIP_STATIC "$builddir/vmlinux"
  # not needed since not building with CONFIG_DEBUG_INFO=y

  echo "Adding symlink..."
  mkdir -p "$pkgdir/usr/src"
  ln -sr "$builddir" "$pkgdir/usr/src/$pkgbase"
}

pkgname=("$pkgbase" "$pkgbase-headers")
for _p in "${pkgname[@]}"; do
  eval "package_$_p() {
    $(declare -f "_package${_p#$pkgbase}")
    _package${_p#$pkgbase}
  }"
done

# vim:set ts=8 sts=2 sw=2 et: