## CONFIGURED FOR ARCHLINUX

## Last updated 9 October 2013 for Tor 0.2.5.2-alpha.
## (may or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## https://www.torproject.org/docs/faq#torrc


## Tor opens a socks proxy on port 9050 by default -- even if you don't
## configure one below. Set "SocksPort 0" if you plan to run Tor only
## as a relay, and not make any local application connections yourself.
SocksPort 127.0.0.1:9050 # Default: Bind to localhost:9050 for local connections.
#SocksPort 192.168.0.1:9100 # Bind to this address:port too.

## If non-zero, open this port to listen for UDP DNS requests, and resolve
## them anonymously. This port only handles A, AAAA, and PTR requests
## it doesn’t handle arbitrary DNS request types.
#DNSPort 127.0.0.1:9053

## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SocksPolicy is set, we accept
## all (and only) requests that reach a SocksPort. Untrusted users who
## can access your SocksPort may be able to learn about the connections
## you make.
#SocksPolicy accept 192.168.0.0/16
#SocksPolicy reject *

## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
## Send every possible message to /var/log/tor/debug.log
#Log debug file /var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr

## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
RunAsDaemon 1
User tor

## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor

## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
#CookieAuthentication 1

############### This section is just for location-hidden services ###

## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.

#HiddenServiceDir /var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80

#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22

################ This section is just for relays #####################
#
## See https://www.torproject.org/docs/tor-doc-relay for details.

## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised in
## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
## follows.  You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORPort 443 NoListen
#ORPort 127.0.0.1:9090 NoAdvertise

## The IP address or full DNS name for incoming connections to your
## relay. Leave commented out and Tor will guess.
#Address noname.example.com

## If you have multiple network interfaces, you can specify one for
## outgoing traffic to use.
# OutboundBindAddress 10.0.0.5

## A handle for your relay, so people don't have to refer to it by key.
#Nickname ididnteditheconfig

## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 20 KB.
## Note that units for these config options are bytes per second, not bits
## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
#RelayBandwidthRate 100 KB  # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)

## Use these to restrict the maximum traffic per day, week, or month.
## Note that this threshold applies separately to sent and received bytes,
## not to their sum: setting "4 GB" may allow up to 8 GB total before
## hibernating.
##
## Set a maximum of 4 gigabytes each way per period.
#AccountingMax 4 GB
## Each period starts daily at midnight (AccountingMax is per day)
#AccountingStart day 00:00
## Each period starts on the 3rd of the month at 15:00 (AccountingMax
## is per month)
#AccountingStart month 3 15:00

## Contact info to be published in the directory, so we can contact you
## if your relay is misconfigured or something else goes wrong. Google
## indexes this, so spammers might also collect it.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>

## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised in
## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
## follows.  below too. You'll need to do ipchains or other port
## forwarding yourself to make this work.
#DirPort 80 NoListen
#DirPort 127.0.0.1:9091 NoAdvertise
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html in Tor's source
## distribution for a sample.
#DirPortFrontPage /etc/tor/tor-exit-notice.html

## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## https://www.torproject.org/docs/faq#MultipleRelays
## However, you should never include a bridge's fingerprint here, as it would
## break its concealability and potentionally reveal its IP/TCP address.
#MyFamily $keyid,$keyid,...

## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins. If you want to _replace_
## the default exit policy, end this with either a reject *:* or an
## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
## default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
## For security, by default Tor rejects connections to private (local)
## networks, including to your public IP address. See the man page entry
## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
#ExitPolicy accept *:119 # accept nntp as well as default exit policy
#ExitPolicy reject *:* # no exits allowed

## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even an
## ISP that filters connections to all the known Tor relays probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
#BridgeRelay 1
## By default, Tor will advertise your bridge to users through various
## mechanisms like https://bridges.torproject.org/. If you want to run
## a private bridge, for example because you'll give out your bridge
## address manually to your friends, uncomment this line:
#PublishServerDescriptor 0

## This is useful when running on flash memory or other media that support only
## a limited number of writes.
#AvoidDiskWrites 1

## BAD NODES - http://xqz3u5drneuzhaeo.onion/users/badtornodes
## The following list provides information about relays that have been checked
## for injecting content over HTTP-connections.
ExcludeNodes $bbefffa108ad16b8e5f0323cf086811c17190bba, $2d5e2ca4b22809379b36028da5b7cb453671e5b6, \
             $5eb6c2094c4ac42d3fbd1cba25fc3b4196e2ff83, $c813d142c092ac01f2f20970dba7086b8a7e52a3, \
             $9c8bb2a38d99283c4acefb1ad4f52a23413787d6, $7c18ee0cb68a259ba6ce0001f2f7b8180a875a6d, \
             $47bbde163dc80f5f5e666698ab4b97900dcff929, $acbacb92581c078cc6e285075cfef467e9ccf76a, \
             $5d84518804ab4b032531b2647603fe1c5e569c26, $2d9a667f3d44f2a3296800bdd310c3747dc8f465, \
             $1824cc33499fd55920a804c66bbaa05669d43117, $4205c064e59aaafeadd2ace80d705183c4f2758a, \
             $14f04a0861b913bfcac1eabac74a1f47bdf41f3a, $1f9803d6ade967718912622ac876feef1088cfaa, \
             $90804a60f89789d44a16a88596598fbc8f5e177b, $0d4f72f90e50b6f5967c4c7267354b22fa48ea86, \
             $eda829cba890bbb30fe5be04779d83044126ba67, $c0e236c6e9a6b29efe247dcbc8a1eaaac247770c, \
             $192fa9d6e9a27024f6e733a6196d33cc8425d1c9, $fe0551589d19dcbeb193fe78a9a003a8a2fc09aa, \
             $2539ea281de61d5b289f580af52dde9a42cdae36, $6c7c819f808ac125c69e1d981f350dcba44da8b5, \
             $35bdc6486420efd442c985d8d3c074988bfe544b, $43be706e24143ab6b3b86dbf7cd4fde1e0c4caf1, \
             $103827708bd078eec737137585eccb5bcea6424b, $8ff73b8fbfbf2ccb52a8e46a515418f97a69c812, \
             $94cbe5df362142d06de73b102e054442cfe627c9, $f2244a8d5da14359cda1dab70f328e62e74e9837, \
             $14be6d0789a234bc4c1866b809d8062d22ee38cf, $9e6ee731a0dec6c65bb4bfb8dd2be461b6e58144, \
             $2cb53ff756483b738e7b0b39ada3453b5259a1f3, $0077b6576a668f861f9f41fdf8da7795c8bb86d5, \
             $c9be2c39ca4e6f120293c80d2cbe2bc34f3a1f30, $bcc93397b50c1ac75c94452954a5bcda01f47215, \
             $ee25656d71db9a82c8efd8c4a99ddbec89f24a67, $1caa0aff0a8236fa7f83f392c11b76cf7eeaac60, \
             $28151be14cb5c22a236163c3e97409d6fd607356, $1b777f2c879c76fc529d1ec63508aad0e1759e79, \
             $53c4c4e1741ca61ad4f09cc9eae8abe1fd92f08b

## If StrictNodes is set to 1, Tor will treat the ExcludeNodes option as a
## requirement to follow for all the circuits you generate, even if doing so
## will break functionality for you.
#StrictNodes 1