Package Details: 8192cu-dkms v4.0.2_9000-16

Git Clone URL: https://aur.archlinux.org/8192cu-dkms.git (read-only)
Package Base: 8192cu-dkms
Description: Driver for Realtek RTL8188CUS (8188C, 8192C) chipset wireless cards
Upstream URL: http://www.realtek.com.tw/
Licenses: GPL
Conflicts: 8192cu, dkms-8192cu, rt8192cu
Replaces: dkms-8192cu
Submitter: runnytu
Maintainer: runnytu
Last Packager: runnytu
Votes: 96
Popularity: 0.169796
First Submitted: 2014-05-07 21:01
Last Updated: 2019-05-07 19:58

Dependencies (2)

Required by (0)

Sources (3)

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 8 9 ... Next › Last »

PhotonX commented on 2017-05-11 20:20

Trying to use this with a Sitecom WLA-2100 (300M), USB code 0df6:0077. The module builds fine and everything looks good but after a reboot the module is not loaded. "lsmod | grep 8192" and "dmesg | grep 8192" give no output. When plugging off and on the Wifi stick, dmesg reports that it is running with xhci_hcd which is complete rubbish. What could be the reason for the problem? Running kernel 4.9.24.

Caribou123 commented on 2017-04-25 16:58

Hello,
I encounter an issue with my dwa 131 B which use 8192cu driver.
My download rate is 8mbits and upload 0,4mbits i m trying every option with modprobe but doesnt seem to change anything.
Does some one already had this problem ? Is there a parameter that influe on upload rate ?
Thanks^^

kts commented on 2017-03-16 15:55

@runnytu, @kleinph;
Thanks!

Modifying NetworkManager.conf get me to the fullest possible speed and the highest signal strength.

kleinph commented on 2017-03-16 12:36

@runnytu, ups sorry, I must habe overlooked that.

runnytu commented on 2017-03-16 11:50

@kleinph, it was alredy in the comments:

runnytu comentó en 2016-11-01 14:59
The problem with NM 1.4.2 is for a new functionality added in the new version, after upgrade both packages to 1.4.2, you need to add in etc/NetworkManager/NetworkManager.conf at the end of file this:

[device]
wifi.scan-rand-mac-address=no

restart networkmanager service and works ok.

kleinph commented on 2017-03-16 10:31

@francesco_dem:
Are you using NetworkManager? That may be the problem, because it randomizes MAC addresses while scanning for networks. This seems to be not well supported by this driver and it constantly fails and spams the log with such messages:
NetworkManager: <info> device (wlan0): supplicant interface state: disabled -> inactive
NetworkManager: <warn> device (wlan0): set-hw-addr: new MAC address XX:XX:XX:XX:XX:XX not successfully set (scanning)
NetworkManager: <info> device (wlan0): supplicant interface state: inactive -> disabled

I put
[device]
wifi.scan-rand-mac-address=0
in my /etc/NetworkManager/NetworkManager.conf it worked like a charm.

See also https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836351.

@runnytu maybe you could put this info somewhere.

(edit: posted the correct config snippet)

runnytu commented on 2017-03-09 20:12

One more time, rtlwifi, rtl8192c_common and rtl8xxxu are the kernel included drivers, and rtl8192cu the provided by this package, to work with the provided by this package only is need it rtl8192cu and blacklisted the rest, if not you are using the kernel drivers and don't need this package after all, with this blacklist is working since ever, if not working maybe you need some more packages or config change but the package still working ok.

kts commented on 2017-03-04 19:19

@francesco_dem

It worked. Problem solved.

francesco_dem commented on 2017-02-08 16:12

Hi,
I had to change blacklist-8192cu-dkms.conf from
(like comment of beef):
blacklist rtlwifi
blacklist rtl8192c_common
blacklist rtl8192cu
blacklist rtl8xxxu

to:
blacklist rtl8192cu

works for me

francesco_dem commented on 2017-02-07 16:13

hi,
after update kernel to 4.9.7-1, doesn't work for me

sudo dkms install -m 8192cu -v 1.10

8192cu:
Running module version sanity check.
Error! Module version v4.0.2_9000.20130911 for 8192cu.ko
is not newer than what is already found in kernel 4.9.7-1-ARCH (v4.0.2_9000.20130911).
You may override by specifying --force.

depmod.......

DKMS: install completed.