Arch Linux User Repository

Also enables ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth Device (HP) . Thank you.

Hello @Sonic-Y3k, ASUS seem to have updated their CDN address to use HTTPS. To avoid a 404 when trying to download the driver from their website, can you use the new https://dlcdnets.asus.com/pub/ASUS/wireless/USB-BT400/DR_USB_BT400_${pkgver}_Windows.zip link? Thank you for maintaining this package!

Thank you very much. This fixed the bluetooth on laptop Toshiba Satellite c40-c-10k running xfce4.

Crashes with latest arch kernel.

Bus 003 Device 003: ID 105b:e065 Foxconn International, Inc. BCM43142A0 Bluetooth module The VID is 105b and PID e065. I'm glad to this package support it, but when I reload btusb moudle, kernel cant find firmware brcm/BCM.hcd. I move brcm/BCM43142A0-105b-e065.hcd to brcm/BCM.hcd, then it works. There is my patch.

@@ -118,7 +118,12 @@ package_bcm43142a0-firmware() {
   mkdir -p ${pkgdir}/usr/lib/firmware/brcm

   for i in BCM43142A0-*.hcd; do
+      if [ "$i" == "BCM43142A0-105b-e065.hcd" ]; then
+          install -m644 "${srcdir}/$i" "${pkgdir}/usr/lib/firmware/brcm/BCM.hcd"
+      else
           install -m644 "${srcdir}/$i" "${pkgdir}/usr/lib/firmware/brcm/$i"
+      fi
   done
 }

Bus 001 Device 003: ID 0a5c:6410 Broadcom Corp. BCM20703A1 Bluetooth 4.1 + LE

$ dmesg | grep Bluetooth
[    4.199790] Bluetooth: Core ver 2.22
[    4.199811] Bluetooth: HCI device and connection manager initialized
[    4.199813] Bluetooth: HCI socket layer initialized
[    4.199815] Bluetooth: L2CAP socket layer initialized
[    4.199819] Bluetooth: SCO socket layer initialized
[    6.367017] Bluetooth: hci0: command 0x1001 tx timeout
[   14.815058] Bluetooth: hci0: BCM: Reading local version info failed (-110)

Used to work before updating to 4.15

Edit: The error above was on a DELL XPS 9550. After updating bios to the latest version - 1.6.1, everything works

Still have the same problem with broadcom adapter. But Orico BTA-403 works very well. Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

Bus 003 Device 004: ID 0a5c:21d7 Broadcom Corp. BCM43142 Bluetooth 4.0 bcm43142a0-firmware 1201710-8 package installed. dmesg Bluetooth: hci0: BCM: chip id 70 Bluetooth: hci0: localhost Bluetooth: hci0: BCM (001.001.011) build 0341 Bluetooth: hci0: BCM (001.001.011) build 0341 Bluetooth: hci0: BCM43142A0 Generic USB Class 2 NonUHE @ 20 MHz Device x:x:x:x:x:x Connected: yes [CHG] Device x:x:x:x:x:x ServicesResolved: yes [BT Receiver]# info x:x:x:x:x:x Device x:x:x:x:x:x Name: BT Receiver Alias: BT Receiver Class: 0x240408 Icon: audio-card Paired: yes Trusted: yes Blocked: no Connected: yes LegacyPairing: no UUID: Headset (00001108-0000-1000-8000-00805f9b34fb) UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb) UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb) UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb) UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb) RSSI: -81 The problem is sound may disapper on distanse >= 10 cm. No such problem when I play music from my phone to the same bluetooth device. log Unable to get io data for Headset Voice gateway: getpeername: Transport endpoint is not connected (107)

@OdinEidolon apparently BCM20703A1 requires a different name for it's firmware. If you install the updated version, everything should work just fine.

I have this BT chipset (Dell 1830) but... [ 3.382633] Bluetooth: hci0: BCM20703A1 [ 3.383627] Bluetooth: hci0: BCM (001.001.005) build 0000 [ 3.383640] bluetooth hci0: Direct firmware load for brcm/BCM-0a5c-6410.hcd failed with error -2 [ 3.383641] Bluetooth: hci0: BCM: Patch brcm/BCM-0a5c-6410.hcd not found What is going on? (EDIT: I'll try to link the driver to the reported missing file... OK, it works: ln -s /lib/firmware/brcm/BCM20703A1-0a5c-6410.hcd /lib/firmware/brcm/BCM-0a5c-6410.hcd )