Package Details: fingerprint-gui 1.09-7

Git Clone URL: https://aur.archlinux.org/fingerprint-gui.git (read-only, click to copy)
Package Base: fingerprint-gui
Description: Fingerprint-based authentication, supports UPEK readers with non-free library
Upstream URL: https://github.com/maksbotan/fingerprint-gui
Licenses: GPL
Submitter: ffjia
Maintainer: gborzi
Last Packager: gborzi
Votes: 133
Popularity: 0.006301
First Submitted: 2010-08-20 05:55 (UTC)
Last Updated: 2020-08-27 12:52 (UTC)

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 8 9 10 .. 16 Next › Last »

jtmb commented on 2017-08-10 17:18 (UTC)

package fails to build, md5 check fails on tar.gz

miltador commented on 2017-05-26 05:47 (UTC) (edited on 2017-05-29 05:17 (UTC) by miltador)

Please add device 138a:003d to the patch. Bus 001 Device 003: ID 138a:003d Validity Sensors, Inc. VFS491 Edited patch: diff -ruN fingerprint-gui-1.09-orig/upek/91-fingerprint-gui-upek.rules fingerprint-gui-1.09/upek/91-fingerprint-gui-upek.rules --- fingerprint-gui-1.09-orig/upek/91-fingerprint-gui-upek.rules 2017-01-12 19:48:38.325444912 +0300 +++ fingerprint-gui-1.09/upek/91-fingerprint-gui-upek.rules 2017-01-12 19:50:35.799120728 +0300 @@ -7,6 +7,10 @@ ATTRS{idVendor}=="147e", ATTRS{idProduct}=="100[0123]", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" ATTRS{idVendor}=="147e", ATTRS{idProduct}=="300[01]", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" ATTRS{idVendor}=="147e", ATTRS{idProduct}=="500[23]", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0018", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0050", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0092", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="003d", SYMLINK+="input/touchchip-%k", MODE="0664", GROUP="plugdev" # enable power saving ATTRS{idVendor}=="0483", ATTRS{idProduct}=="201[56]", ATTR{power/control}=="*", ATTR{power/control}="auto" @@ -15,3 +16,7 @@ ATTRS{idVendor}=="147e", ATTRS{idProduct}=="100[0123]", ATTR{power/control}=="*", ATTR{power/control}="auto" ATTRS{idVendor}=="147e", ATTRS{idProduct}=="300[01]", ATTR{power/control}=="*", ATTR{power/control}="auto" ATTRS{idVendor}=="147e", ATTRS{idProduct}=="500[23]", ATTR{power/control}=="*", ATTR{power/control}="auto" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0018", ATTR{power/control}=="*", ATTR{power/control}="auto" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0050", ATTR{power/control}=="*", ATTR{power/control}="auto" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0092", ATTR{power/control}=="*", ATTR{power/control}="auto" +ATTRS{idVendor}=="138a", ATTRS{idProduct}=="003d", ATTR{power/control}=="*", ATTR{power/control}="auto"

bpietras commented on 2017-05-25 09:21 (UTC) (edited on 2017-05-25 09:34 (UTC) by bpietras)

EDIT - solved. simply needed sudo systemctl start vfs495-daemon.service sudo systemctl enable vfs495-daemon.service lsusb | grep Finger Bus 001 Device 005: ID 138a:0007 Validity Sensors, Inc. VFS451 Fingerprint Reader sudo chmod 777 /dev/bus/usb/001/005 ********* Hi, For 138a:0007 Validity Sensors, Inc. VFS451 Fingerprint Reader I have a core dump, Signal: 11 (SEGV): Reading symbols from /usr/bin/fingerprint-gui...(no debugging symbols found)...done. [New LWP 9119] [New LWP 9114] [New LWP 9117] [New LWP 9116] [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/libthread_db.so.1". Core was generated by `fingerprint-gui'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007fed057d3f71 in _dl_close () from /lib64/ld-linux-x86-64.so.2 [Current thread is 1 (Thread 0x7fecf122d700 (LWP 9119))] Any advice?

arcanis commented on 2017-05-15 09:17 (UTC) (edited on 2017-05-15 09:17 (UTC) by arcanis)

both are added without version bump, sorry for delay

fanningert commented on 2017-05-11 20:00 (UTC)

Pleas add 138a:0092 Validity Sensors, Inc.

jaro3 commented on 2017-04-25 02:32 (UTC)

Bus 001 Device 005: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader on HP notebooks needs patching: https://balintbanyasz.wordpress.com/2015/03/27/get-validity-vfs-495-fingerprint-reader-working-in-ubuntu-14-04/

mixedCase commented on 2017-03-20 13:37 (UTC)

Please add device 138a:0018 to the patch (just like 138a:0050). I just tested adding it manually and it works.

arcanis commented on 2017-01-25 13:45 (UTC)

upd even with pacaur no error occur. Could you please post full log, because your message does not contain any errors?

arcanis commented on 2017-01-25 13:36 (UTC)

could not confirm. Just built it with makepkg and devtools and no errors occur

ashaman-crypto commented on 2017-01-22 01:01 (UTC)

I'm getting a build error, same one on two different machines. install -m 644 -p /home/user/.cache/pacaur/fingerprint-gui/src/fingerprint-gui-1.09/doc/success.png /home/user/.cache/pacaur/fingerprint-gui/pkg/fingerprint-gui//usr/share/doc/fingerprint-gui/ install -m 644 -p /home/user/.cache/pacaur/fingerprint-gui/src/fingerprint-gui-1.09/doc/test.png /home/user/.cache/pacaur/fingerprint-gui/pkg/fingerprint-gui//usr/share/doc/fingerprint-gui/ install -m 644 -p /home/user/.cache/pacaur/fingerprint-gui/src/fingerprint-gui-1.09/doc/verify.png /home/user/.cache/pacaur/fingerprint-gui/pkg/fingerprint-gui//usr/share/doc/fingerprint-gui/ make[2]: Leaving directory '/home/user/.cache/pacaur/fingerprint-gui/src/fingerprint-gui-1.09/bin/fingerprint-gui' make[1]: Leaving directory '/home/user/.cache/pacaur/fingerprint-gui/src/fingerprint-gui-1.09/bin' make: *** [Makefile:49: sub-bin-install_subtargets] Error 2 ==> ERROR: A failure occurred in package(). Aborting...

« First ‹ Previous 1 2 3 4 5 6 7 8 9 10 .. 16 Next › Last »