Package Details: libfprint-elantech-git r352.8d2c931-1

Git Clone URL: https://aur.archlinux.org/libfprint-elantech-git.git (read-only)
Package Base: libfprint-elantech-git
Description: A fork of libfprint with ElanTech fingerprint reader driver
Upstream URL: https://github.com/iafilatov/libfprint
Licenses: LGPL
Conflicts: libfprint
Provides: libfprint
Submitter: prstoetzer
Maintainer: prstoetzer
Last Packager: prstoetzer
Votes: 1
Popularity: 0.000923
First Submitted: 2018-06-27 01:46
Last Updated: 2018-08-06 12:40

Required by (4)

Sources (1)

Latest Comments

RidderJoris commented on 2018-10-11 18:10

I have an Asus UX430UA, which has the 96x96 sensor (04f3:0903). In the beginning it worked really bad, but after some swiping practice it works really quite well actually (almost every time in one try). Make sure you swipe slowly. Thanks for the effort! :)

erkexzcx commented on 2018-08-09 23:33

Understood. Thanks for the update. :)

prstoetzer commented on 2018-08-06 12:42

Thanks, erkexzck, I have updated the package with your comments. Unfortunately, the driver does not seem to work well with some of the single touch sensors. From what I've read, libfprint expects a higher resolution than some of these sensors provide, so while you might get a finger here or there to work, it won't be reliable. It's not actually the driver's fault, but the design of libfprint that's incompatible some of these low cost sensors.

erkexzcx commented on 2018-07-28 18:34

Documentation fails to build (also this is mentioned in the GIT repo). See my comments below for workaround.

IsoaSFlus commented on 2018-07-25 02:01

Failed on the procedure of package

Building documentation for libfprint
ERROR: 
Error in gtkdoc helper script:

ERROR: 'gtkdoc-scangobj' failed with status 1
Traceback (most recent call last):
  File "/usr/bin/gtkdoc-scangobj", line 71, in <module>
    sys.exit(scangobj.run(options))
  File "/usr/share/gtk-doc/python/gtkdoc/scangobj.py", line 1230, in run
    for line in common.open_text(options.types):
  File "/usr/share/gtk-doc/python/gtkdoc/common.py", line 51, in open_text
    return open(filename, mode, encoding=encoding)
FileNotFoundError: [Errno 2] No such file or directory: '/home/midorikawa/.cache/yay/libfprint-elantech-git/src/build/doc/libfprint.types'

FAILED: meson-install 
/usr/bin/python /usr/bin/meson install --no-rebuild
ninja: build stopped: subcommand failed.

erkexzcx commented on 2018-07-24 19:23

Some fingers are detected, but always end up with "Enroll result: enroll-unknown-error". Not quite sure, but I think this driver is not working with Asus UX430UQ laptop's fingerprint sensor (04f3:0903)...

erkexzcx commented on 2018-07-24 19:22

Updated and working AUR package: https://pastebin.com/tVF5jx70 (fixed documentation build issue and symlinked C header file to correct location in order to make fingerprint-gui installable).