Package Details: nx-all 3.5.0-9

Git Clone URL: https://aur.archlinux.org/nx-all.git (read-only)
Package Base: nx-all
Description: NoMachine nxclient, nxnode, and nxserver in one package
Upstream URL: https://www.nomachine.com/
Licenses: custom:nomachine
Conflicts: freenx, nxclient
Provides: nxclient, nxnode, nxserver
Submitter: codekoala
Maintainer: Muflone
Last Packager: Muflone
Votes: 31
Popularity: 1.062683
First Submitted: 2012-11-16 18:13
Last Updated: 2015-06-13 16:11

Latest Comments

electricprism commented on 2015-11-16 08:28

Could you upgrade to version 5.x of the server
https://www.nomachine.com/download/linux&id=1

Muflone commented on 2015-05-02 15:31

Has anyone successfully made a good setup for NX4?
All the previous examples in the comments aren't the proper way to package the softwares as they don't track the files installed by nxserver install process but only the four .tar.gz files included in the original setup.

electricprism commented on 2015-04-29 20:12

@Muflone - Wonderful, thank you

Muflone commented on 2015-04-25 22:30

I'll upload the nx-all 4.5 update in the next days after some tests, sorry again for the delay

The actual version 3.5 is moved in the nx3-all package https://aur.archlinux.org/packages/nx3-all/

People that uses virtual desktop should stick with the 3.x as the new 4.x version hasn't support for virtual desktop but will act in a way similar to Windows VNC, showing the physical desktop screen.

electricprism commented on 2015-04-23 05:44

@olav_st - I upgraded your PKGBUILD to work with 4.5.0

Follow These Instructions to install NoMachine NX - maybe the package mantainer could update the official instructions
https://github.com/ElectricPrism/nomachine-pkgbuild/blob/master/README.md

nerux commented on 2015-02-03 16:34

The new openssl package (1.0.2) not run with current version of nomachine (4.4.6)

nerux commented on 2015-02-03 16:24

The new openssl package (1.0.2-1) don't run with the out-of-date version (3.5.0) or the current stable version (4.4.6)

nerux commented on 2015-02-03 16:22

The new openssl don't run with the out-of-date version (3.5.0) or the current stable version (4.4.6)

olav_st commented on 2014-06-18 12:44

I wrote a quick PKGBUILD for 4.4.25 that seems to work: https://bitbucket.org/olav_st/nomachine-pkgbuild/src
Not sure if its up to the AUR standards, but feel free to use it.

codekoala commented on 2014-05-27 13:33

Personally, I have no plans to update this particular package for the new 4.x line. Seems like plenty of people want it. I took a stab at it a while back, but I never got it working. I'm more than happy to disown this package if someone else wants to do that work though!

183.amir commented on 2014-05-26 16:45

Version 4 is out. Are you planning to provide version 4 too?
I cannot connect to my v4 server with this client.

codekoala commented on 2014-04-11 02:56

Finally got around to fixing this package. I've mirrored the original tarballs and fixed the service file. It should work happily again!

Sorry for the delay.

Akarienta commented on 2014-03-31 19:31

It is still possible to get it, chnage the links in PKGBUILD only, for exmaple like this (for the x86_64 arch):

http://download.vrdc.cornell.edu/extras/other/nxclient-3.5.0-7.x86_64.tar.gz
ftp://ftp.pl.freebsd.org/vol/rzm1/linux-gentoo/distfiles/nxnode-3.5.0-7.x86_64.tar.gz
ftp://mirror.datapipe.net/gentoo/distfiles/nxserver-3.5.0-11.x86_64.tar.gz

xtian commented on 2014-03-09 15:52

@ice9, It should be mentioned x2go is a complete departure from NX: "...even though X2Go uses the same libraries [as NX], [...] It’s not possible to use NX client to log on to an X2Go server and vice versa." [url=http://wiki.x2go.org/doku.php/doc:faq:start]

codekoala commented on 2014-02-24 16:20

Sorry for the absence. It would seem that NoMachine has indeed taken the legacy binaries offline (unless you're a paying customer): https://www.nomachine.com/version-3

I haven't had the time to put into version 4 yet, but it's certainly on my TODO list. I'm more than happy to disown this package or accept changes to the PKGBUILD if someone else has more time to put into the version 4 stuff...

ice9 commented on 2014-02-21 23:43

I don't know about the error you are seeing, but if you are looking for something that uses the NX3 code (updated and maintained) that does work, check out x2go.

xtian commented on 2014-02-21 23:36

curl: (22) The requested URL returned error: 404 Not Found
==> ERROR: Failure while downloading nxclient-3.5.0-7.x86_64.tar.gz
Aborting...

Is this because of the recent release of nomachine's nx v4? I don't see a way to even download v3 on the site anymore.

An updated version to nomachine 4 would be brilliant!

ptrxyz commented on 2014-02-07 10:43

Any news about an updated paket? Would love to see a NX in arch's repos... :)

LeCrayonVert commented on 2013-12-01 19:24

ice9 > thanks for the feedback. For me, the system crashes (after filling up all the RAM) when I run the install script... I did not know about x2go...seems to be a good alternative.

ice9 commented on 2013-10-04 09:13

As far as I can tell, Nomachine version 4 does not have a free version that allows "virtual desktops". The free version will only allow you to share what they call "physical desktops", which appears to mean an actual monitor display.

To use virtual desktops, you need to get the Enterprise version of Nomachine. The least expensive Enterprise version that allows virtual desktops appears to be "Nomachine Workstation" from the "Terminal Server Family". It has a 30 day free trial, but after that you have to pay for it.

I did manage to install the Nomachine Workstation on my Arch linux server. I had to supply a distro type (since it does not support Arch). I decided to use Fedora, since it is one of the supported distros that use systemd. So the command was:

/usr/NX/nxserver --install fedora

and I was able to access a virtual desktop from my Windows client machine. Still, I am not willing to pay for the Nomachine Workstation, so I guess I will continue to use x2go instead.

codekoala commented on 2013-09-27 14:15

I've put in as much time as I dare on a new PKGBUILD while at work. It doesn't work yet, but it's a start for anyone who cares to fork/contribute changes. It seems to me that they've renamed it from NX to just NoMachine, so I think the work done toward the 4.0 line probably belongs in a new package called nomachine (as you can see from the repo name below).

https://bitbucket.org/instarch/nomachine/src/master/PKGBUILD

codekoala commented on 2013-09-27 12:32

Oh wow, after all these years they finally released 4.0! I'll certainly take a stab at updating this package, but it may take a while. Every time I've tried to use the pre-release 4.0 stuff it was a horrible failure.

PLum commented on 2013-09-27 09:15

Can You prepare 4.0 version ?

sinarf commented on 2013-09-20 16:29

The service refuse to start there is the status :
----
sudo systemctl status nxserver.service
nxserver.service - NoMachine NX Server
Loaded: error (Reason: Invalid argument)
Active: inactive (dead)

sept. 19 21:01:04 michelb systemd[1]: nxserver.service has Restart setting other than no, which isn't allowed for Type=oneshot services. Refusing.
-----

To fix this just do what is said. edit /usr/lib/systemd/system/nxserver.service to have
------
Restart=no
------

Thanks for the package by the way. :-D

smekkleysa commented on 2013-09-13 14:54

Thank you for sharing this great package!
Easy to set up and a lot faster than xrdp.
I can't wait for version 4.0.
I installed 4.0 beta on windows and it was so smooth that i could even play hd movie without any delay or lag!

rat commented on 2013-09-04 17:54

I passed a lot of mistakes after installed this package (they missing a lot of config file, license file and I had some not correct version of libraries), always You have to check the logs what next thing not work :)

Now I stuck on the "nxssh" program I have this error message when I tested it:
OpenSSL version mismatch. Built against 90805f, you have 1000100f

In my opinion I should recompile it with the current version of OpenSSL what is installed in my system and I will be try to do it.

Also I think the Arch Linux is a "fresh" system, because a lot of package are often upgrade (this is good) to the latest version, but this is not good with this "static" nxssh program (it always should be compiled during installation if it so much depends from OpenSSL), I think this problem in future will be show up a lot of time.

rat commented on 2013-09-04 17:36



2013-09-04 17:34

I passed a lot of mistakes after installed this package (they missing a lot of config file, license file and I had some not correct version of libraries), always You have to check the logs what next thing not work :)

Now I stuck on the "nxssh" program I have this error message when I tested it:
OpenSSL version mismatch. Built against 90805f, you have 1000100f

In my opinion I should recompile it with the current version of OpenSSL what is installed in my system, but I am not able to find the source on NoMachine page.

Also I think the Arch Linux is a "fresh" system, because a lot of package are often upgrade (this is good) to the latest version, but this is not good with this "static" nxssh program (it always should be compiled during installation if it so much depends from OpenSSL), I think this problem in future will be show up a lot of time.

rat commented on 2013-09-04 17:34

I passed a lot of mistakes after installed this package (they missing a lot of config file, license file and I had some not correct version of libraries), always You have to check the logs what next thing not work :)

Now I stuck on the "nxssh" program I have this error message when I tested it:
OpenSSL version mismatch. Built against 90805f, you have 1000100f

In my opinion I should recompile it with the current version of OpenSSL what is installed in my system, but I am not able to find the source on NoMachine page.

Also I think the Arch Linux is a "fresh" system, because a lot of package are often upgrade (this is good) to the latest version, but this is not good with this "static" nxssh program (it should be compiled during installation if it so much depends from OpenSSL), I think this problem in future will be show up a lot of time.

rat commented on 2013-09-04 17:33

I passed a lot of mistakes after installed this package (they missing a lot of config file, license file and I had some not correct version of libraries), always You have to check the logs what next thing not work :)

Now I stuck on the "nxssh" program I have this error message when I tested it:
OpenSSL version mismatch. Built against 90805f, you have 1000100f

In my opinion I should recompile it with the current version of OpenSSL what is installed in my system, but I can to find the source on NoMachine page.

Also I think the Arch Linux is a "fresh" system, because a lot of package are often upgrade (this is good) to the latest version, but this is not good with this "static" nxssh program (it should be compiled during installation if it so much depends from OpenSSL), I think this problem in future will be show up a lot of time.

luismy commented on 2013-07-21 19:56

Thanks. Yes, it is in /usr/NX/bin/

But unfortunately the wiki is outdated.

I am trying to set up NX but I have not luck. :(

karol_007 commented on 2013-07-20 16:29

Try to find out where nxserver went e.g. 'pacman -Ql nx-all | grep bin | grep nxserver'. Maybe it's /usr/NX/bin/nxserver? I'm not sure if it's in the PATH.

luismy commented on 2013-07-20 16:19

Hello.

I'm following the ARCH Wiki and when I try do..

# /usr/bin/nxserver --adduser [username]

I get a command no found error.

What happend with "nxserver" command?


Please, help.

luismy commented on 2013-07-20 16:17

Hello.

I'm following the ARCH Wiki and when i try do...

# /usr/bin/nxserver --adduser [username]

I get a command no found error.

What happend with "nxserver" command?

Please, help.

codekoala commented on 2013-07-16 15:54

Thanks karol_007. I don't even remember making that move :)

karol_007 commented on 2013-07-16 15:52

Upstream URL moved, it's now https://bitbucket.org/instarch/nx-all/overview.

codekoala commented on 2012-12-04 05:27

Thanks @setone! I appreciate the positive feedback!

setone commented on 2012-12-04 05:26

You've done a great job, works like a charm. THANKS