Arch Linux User Repository

——注：本楼中，“Sunlogin”即指代“向日葵远程控制”。

为使Sunlogin控制在用户登录前及注销后出现的SDDM界面，执行以下命令：

sudo sh -c 'echo "/usr/bin/xhost +" >> /usr/share/sddm/scripts/Xsetup'

参考于：https://forums.nomachine.com/topic/launch-virtual-desktops-without-0

如果仍然不能控制SDDM，确认你的网络能够在用户登录前自动连接（常见于只有WiFi连接的情况）

需要启动对应的服务才能使用:systemctl start runsunloginclient，也可以参考安装末的提示

目前的问题:

1. 如果遇到无法远程连接,控制Arch(Arch 为被控端),可以试试执行 xhost + 或者重启一下桌面

2. 如果遇到开机自启动后客户端连接不上的情况,参考以下链接: https://wiki.archlinux.org/index.php/Systemd#Running_services_after_the_network_is_up , 确保对应网络管理器的服务已经设置开机启动.

3. 向日葵客户端在启动的时候会屏蔽混成器compositor, 可能会导致plasma桌面没有动画, 这个问题可以通过设置 System Settings- Display and Monitor - Compositor, 勾掉 Allow application to block compositing 选项解决

@ATENZC manjaro用户的话我确实不知道有什么算是通常渠道去学的。manjaro wiki我也没怎么看过。有问题先搜索引擎罢

@Universebenzene Universebenzene systemctl enable runsunloginclient 可以的 新手小白 这样打命令应该从哪里学到？？

非常感谢分享，很好用的软件，软件丰富，安装过程简单，社区大佬多，这就是我喜欢用arch的理由。

    一直都是x11，还是连接不上。 (ノへ~、)

>> loginctl show-session 12 -p Type                                             ✔ 
Type=x11

@maayii

2021-10-01 23:09:49.735 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   get_all_monitor_info: Can't open display :0
2021-10-01 23:09:49.736 * Error *   get monitor info failed

sunloginclient 目前仅支持 X11, 试试从 wayland 且切换到 X11, 看看行不行

​ 服务端显示桌面时就会断开连接，尝试过xhost +，但是没有效果。以下分别是sunlogin_service.log和desktop.log。请问可能是什么出了问题？ 桌面环境gnome-manjaro

sunlogin_service.log

2021-10-01 23:02:46.959 - Info  -   [PluginStream] MultiChannel connection 180.103.181.79:443 logged
2021-10-01 23:02:46.959 - Info  -   PostPluguinLogImpl, event: control_start, plugin: desktop
2021-10-01 23:02:46.959 - Info  -   [http call3] new call id:33, url:https://sl-log.oray.net/slclientlog
2021-10-01 23:02:46.959 - Info  -   [http call3] id:33 create new connection : https://sl-log.oray.net:443
2021-10-01 23:02:46.970 - Info  -   attempt to connect server sl-log.oray.net:443(47.114.98.5:443)
2021-10-01 23:02:47.099 - Info  -   [http call3] id:33, url:https://sl-log.oray.net/slclientlog, status code:200
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=oray_errorcode(0), product=0, type=0, inner code=0 [Disconnect_impl:254]
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=oray_errorcode(0), product=0, type=0, inner code=0 [Disconnect_impl:121]
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=transf(0), product=0, type=0, inner code=0 [HandleDisconnect:1041]
2021-10-01 23:02:47.715 - Info  -   [PluginStream] MultiChannel disconnected server 180.103.181.79:443,error code:0
2021-10-01 23:02:47.715 - Info  -   [service] delete MultiChannelStream USw8jVvLl1nrK9hHMknU9aiyUYq1QztP
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=errorcode(0), product=0, type=0, inner code=0 [OnDisconnect:309]
2021-10-01 23:02:47.716 - Info  -   PostPluguinLogImpl, event: control_end, plugin: desktop
2021-10-01 23:02:47.716 - Info  -   [http call3] new call id:34, url:https://sl-log.oray.net/slclientlog
2021-10-01 23:02:47.716 - Info  -   [oray][erroCode] errorcode=transf(0), product=0, type=0, inner code=0 [Handle:647]
2021-10-01 23:02:47.716 +Warning+   [MultiChannel] unbind forward stream(errorcode 0) @ 651
2021-10-01 23:02:47.716 - Info  -   [http call3] id:34 use old connection : https://sl-log.oray.net:443
2021-10-01 23:02:47.746 - Info  -   [http call3] id:34, url:https://sl-log.oray.net/slclientlog, status code:200
2021-10-01 23:03:02.746 - Info  -   [http call3] disconnect, error( 11 )
2021-10-01 23:03:59.576 +Warning+   [passive:keepalive:] 180.103.181.79:4118 disconnect by keepalive timeout(3359597>=3286675+60002)
2021-10-01 23:03:59.577 +Warning+   [oray][erroCode] errorcode=ORAY_ERROR_PHSTREAM_KEEPALIVE_TIMEOUT(57351), product=0, type=3, inner code=7 [Done:141]
2021-10-01 23:03:59.577 - Info  -   [oray][erroCode] errorcode=oray_errorcode(57351), product=0, type=3, inner code=7 [Disconnect_impl:73]
2021-10-01 23:03:59.577 - Info  -   [udp] Disconnect
2021-10-01 23:03:59.577 - Info  -   [udp] SendDisconnect
2021-10-01 23:03:59.577 - Info  -   [P2PAccepter] 180.103.181.79:4118 disconnected,error code:57351
2021-10-01 23:03:59.577 - Info  -   [LoginUtils] tcp handler size: 0, udp handler size: 0

desktop.log

2021-10-01 23:09:49.731 - Info  -   attempt to connect server 127.0.0.1:35845(127.0.0.1:35845)
2021-10-01 23:09:49.734 - Info  -   cmd:initialization date:{
   "blackscreen" : false,
   "enablerecord" : false,
   "exitlock" : false,
   "index" : 6,
   "mode" : 2,
   "path" : "",
   "save_record_type" : 0,
   "vip_session" : "65vMlvNTbuSSaS8WptapgkwzcxiITAHU"
}

2021-10-01 23:09:49.734 - Info  -   cmd:InitInstance date:
2021-10-01 23:09:49.735 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   get_all_monitor_info: Can't open display :0
2021-10-01 23:09:49.736 * Error *   get monitor info failed

@ATENZC 如果要每次开机都用的话， systemctl enable runsunloginclient 设开机自启服务，这个命令没有用么

第一次装MANJARO ，现在被向日葵有点困扰到了，每次开机必须执行systemctl startrunsunloginclient.service 否则就不能启动 点图标没反应 更别提开机自启了 头痛

@zjsxwc 你这报错看上去好像是服务都没开启

安装后的输出提示看了没。置顶消息和评论区都说过很多次要开启runsunloginclient服务的