Arch Linux User Repository

Notice: version 15.2.0.62802 would sometimes cause Xorg to crash on Manjaro Linux. This usually happens on launch of GoLand or other Jetbrains IDE when sunloginclient (and its service runsunloginclient.service) is already running (without being controlled).

——注：本楼中，“Sunlogin”即指代“向日葵远程控制”。

为使Sunlogin控制在用户登录前及注销后出现的SDDM界面，执行以下命令：

sudo sh -c 'echo "/usr/bin/xhost +" >> /usr/share/sddm/scripts/Xsetup'

参考于：https://forums.nomachine.com/topic/launch-virtual-desktops-without-0

如果仍然不能控制SDDM，确认你的网络能够在用户登录前自动连接（常见于只有WiFi连接的情况）

需要启动对应的服务才能使用:systemctl start runsunloginclient，也可以参考安装末的提示

目前的问题:

1. 如果遇到无法远程连接,控制Arch(Arch 为被控端),可以试试执行 xhost + 或者重启一下桌面

2. 如果遇到开机自启动后客户端连接不上的情况,参考以下链接: https://wiki.archlinux.org/index.php/Systemd#Running_services_after_the_network_is_up , 确保对应网络管理器的服务已经设置开机启动.

3. 向日葵客户端在启动的时候会屏蔽混成器compositor, 可能会导致plasma桌面没有动画, 这个问题可以通过设置 System Settings- Display and Monitor - Compositor, 勾掉 Allow application to block compositing 选项解决

非常感谢分享，很好用的软件，软件丰富，安装过程简单，社区大佬多，这就是我喜欢用arch的理由。

    一直都是x11，还是连接不上。 (ノへ~、)

>> loginctl show-session 12 -p Type                                             ✔ 
Type=x11

@maayii

2021-10-01 23:09:49.735 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   get_all_monitor_info: Can't open display :0
2021-10-01 23:09:49.736 * Error *   get monitor info failed

sunloginclient 目前仅支持 X11, 试试从 wayland 且切换到 X11, 看看行不行

​ 服务端显示桌面时就会断开连接，尝试过xhost +，但是没有效果。以下分别是sunlogin_service.log和desktop.log。请问可能是什么出了问题？ 桌面环境gnome-manjaro

sunlogin_service.log

2021-10-01 23:02:46.959 - Info  -   [PluginStream] MultiChannel connection 180.103.181.79:443 logged
2021-10-01 23:02:46.959 - Info  -   PostPluguinLogImpl, event: control_start, plugin: desktop
2021-10-01 23:02:46.959 - Info  -   [http call3] new call id:33, url:https://sl-log.oray.net/slclientlog
2021-10-01 23:02:46.959 - Info  -   [http call3] id:33 create new connection : https://sl-log.oray.net:443
2021-10-01 23:02:46.970 - Info  -   attempt to connect server sl-log.oray.net:443(47.114.98.5:443)
2021-10-01 23:02:47.099 - Info  -   [http call3] id:33, url:https://sl-log.oray.net/slclientlog, status code:200
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=oray_errorcode(0), product=0, type=0, inner code=0 [Disconnect_impl:254]
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=oray_errorcode(0), product=0, type=0, inner code=0 [Disconnect_impl:121]
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=transf(0), product=0, type=0, inner code=0 [HandleDisconnect:1041]
2021-10-01 23:02:47.715 - Info  -   [PluginStream] MultiChannel disconnected server 180.103.181.79:443,error code:0
2021-10-01 23:02:47.715 - Info  -   [service] delete MultiChannelStream USw8jVvLl1nrK9hHMknU9aiyUYq1QztP
2021-10-01 23:02:47.715 - Info  -   [oray][erroCode] errorcode=errorcode(0), product=0, type=0, inner code=0 [OnDisconnect:309]
2021-10-01 23:02:47.716 - Info  -   PostPluguinLogImpl, event: control_end, plugin: desktop
2021-10-01 23:02:47.716 - Info  -   [http call3] new call id:34, url:https://sl-log.oray.net/slclientlog
2021-10-01 23:02:47.716 - Info  -   [oray][erroCode] errorcode=transf(0), product=0, type=0, inner code=0 [Handle:647]
2021-10-01 23:02:47.716 +Warning+   [MultiChannel] unbind forward stream(errorcode 0) @ 651
2021-10-01 23:02:47.716 - Info  -   [http call3] id:34 use old connection : https://sl-log.oray.net:443
2021-10-01 23:02:47.746 - Info  -   [http call3] id:34, url:https://sl-log.oray.net/slclientlog, status code:200
2021-10-01 23:03:02.746 - Info  -   [http call3] disconnect, error( 11 )
2021-10-01 23:03:59.576 +Warning+   [passive:keepalive:] 180.103.181.79:4118 disconnect by keepalive timeout(3359597>=3286675+60002)
2021-10-01 23:03:59.577 +Warning+   [oray][erroCode] errorcode=ORAY_ERROR_PHSTREAM_KEEPALIVE_TIMEOUT(57351), product=0, type=3, inner code=7 [Done:141]
2021-10-01 23:03:59.577 - Info  -   [oray][erroCode] errorcode=oray_errorcode(57351), product=0, type=3, inner code=7 [Disconnect_impl:73]
2021-10-01 23:03:59.577 - Info  -   [udp] Disconnect
2021-10-01 23:03:59.577 - Info  -   [udp] SendDisconnect
2021-10-01 23:03:59.577 - Info  -   [P2PAccepter] 180.103.181.79:4118 disconnected,error code:57351
2021-10-01 23:03:59.577 - Info  -   [LoginUtils] tcp handler size: 0, udp handler size: 0

desktop.log

2021-10-01 23:09:49.731 - Info  -   attempt to connect server 127.0.0.1:35845(127.0.0.1:35845)
2021-10-01 23:09:49.734 - Info  -   cmd:initialization date:{
   "blackscreen" : false,
   "enablerecord" : false,
   "exitlock" : false,
   "index" : 6,
   "mode" : 2,
   "path" : "",
   "save_record_type" : 0,
   "vip_session" : "65vMlvNTbuSSaS8WptapgkwzcxiITAHU"
}

2021-10-01 23:09:49.734 - Info  -   cmd:InitInstance date:
2021-10-01 23:09:49.735 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   xdu_get: XOpenDisplay :0 failed
2021-10-01 23:09:49.736 * Error *   get_all_monitor_info: Can't open display :0
2021-10-01 23:09:49.736 * Error *   get monitor info failed

@ATENZC 如果要每次开机都用的话， systemctl enable runsunloginclient 设开机自启服务，这个命令没有用么

第一次装MANJARO ，现在被向日葵有点困扰到了，每次开机必须执行systemctl startrunsunloginclient.service 否则就不能启动 点图标没反应 更别提开机自启了 头痛

@zjsxwc 你这报错看上去好像是服务都没开启

安装后的输出提示看了没。置顶消息和评论区都说过很多次要开启runsunloginclient服务的

不能运行： $ sunloginclient 2021-08-21 16:53:47.590 - Info - version:11.0.0.36662 @ 525 [rpcclient]rpcclient_default::connect is error

(sunloginclient:16059): Gtk-CRITICAL **: 16:53:47.800: gtk_main_quit: assertion 'main_loops != NULL' failed m_iEpfd == -1, at WaitCompleted. m_iEpfd == -1, at WaitCompleted.

@Dbv 增加features 请去 向日葵的客服工单 https://console.oray.com/center/workorder, 这里只能解决pkgbuild打包的相关问题:)