path: root/PKGBUILD

# Maintainer: ayaya_neko <a15355447898a@outlook.com>

### BUILD OPTIONS
# You can modify these settings by executing "env _<setting>=<value> makepkg"
# instead of modifying the PKGBUILD file. Here's an example:
# env _makemenuconfig=y _copyfinalconfig=y _subarch=30 makepkg

# Tweak kernel options prior to a build via menuconfig.
# 
# Set to anything but null to activate.
: "${_makemenuconfig:=""}"

# Tweak kernel options prior to a build via nconfig.
# 
# Set to anything but null to activate.
: "${_makenconfig:=""}"

# Tweak kernel options prior to a build via xconfig.
# 
# Set to anything but null to activate.
: "${_makexconfig:=""}"

# Use the current kernel's .config file
# Enabling this option will use the .config of the currently
# running kernel rather than the Arch Linux defaults. Useful
# when the package gets updated and you already went through
# the trouble of customizing your config options. NOT recommended
# when a new kernel is released, but again, convenient
# for package bumps.
#
# Set to anything but null to activate.
: "${_use_current:=""}"

# Apply selected optimizations chosen by
# the package maintainers to the config.
#
# Only takes effect if '_use_current'
# is enabled. Keep disabled if you want
# to reuse your existing kernel configuration
# without any changes being applied to it.
#
# Set to anything but null to activate.
: "${_optimize_defconfig:=""}"

# Determines whether the kernel configuration should be
# copied into the source tree before compilation starts.
# 
# Set to anything but null to activate.
: "${_copyfinalconfig:=""}"

# Only compile active modules to VASTLY reduce the number
# of modules built and the build time.
# 
# To keep track of which modules are needed for your specific system/hardware,
# give modprobed-db a try: https://aur.archlinux.org/packages/modprobed-db
# 
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
# Set to anything but null to activate.
: "${_localmodcfg:=""}"

# Optionally select a sub architecture by number or its Kconfig name,
# for example MCORE2 or MZEN4.
# 
# Leaving it blank will require user interaction during the build.
# Note that the default option is empty.
# 
# Important notice for maintainers:
# Make sure to update the '_subarch'
# section inside update_defconfig()
# if this list is updated on updating
# the kernel compiler patchset.
#
#  1. AMD Opteron/Athlon64/Hammer/K8 (MK8)
#  2. AMD Opteron/Athlon64/Hammer/K8 with SSE3 (MK8SSE3)
#  3. AMD 61xx/7x50/PhenomX3/X4/II/K10 (MK10)
#  4. AMD Barcelona (MBARCELONA)
#  5. AMD Bobcat (MBOBCAT)
#  6. AMD Jaguar (MJAGUAR)
#  7. AMD Bulldozer (MBULLDOZER)
#  8. AMD Piledriver (MPILEDRIVER)
#  9. AMD Steamroller (MSTEAMROLLER)
#  10. AMD Excavator (MEXCAVATOR)
#  11. AMD Zen (MZEN)
#  12. AMD Zen 2 (MZEN2)
#  13. AMD Zen 3 (MZEN3)
#  14. AMD Zen 4 (MZEN4)
#  15. AMD Zen 5 (MZEN5)
#  16. Intel P4 / older Netburst based Xeon (MPSC)
#  17. Intel Atom (MATOM)
#  18. Intel Core 2 (MCORE2)
#  19. Intel Nehalem (MNEHALEM)
#  20. Intel Westmere (MWESTMERE)
#  21. Intel Silvermont (MSILVERMONT)
#  22. Intel Goldmont (MGOLDMONT)
#  23. Intel Goldmont Plus (MGOLDMONTPLUS)
#  24. Intel Sandy Bridge (MSANDYBRIDGE)
#  25. Intel Ivy Bridge (MIVYBRIDGE)
#  26. Intel Haswell (MHASWELL)
#  27. Intel Broadwell (MBROADWELL)
#  28. Intel Skylake (MSKYLAKE)
#  29. Intel Skylake X (MSKYLAKEX)
#  30. Intel Cannon Lake (MCANNONLAKE)
#  31. Intel Ice Lake (MICELAKE)
#  32. Intel Cascade Lake (MCASCADELAKE)
#  33. Intel Cooper Lake (MCOOPERLAKE)
#  34. Intel Tiger Lake (MTIGERLAKE)
#  35. Intel Sapphire Rapids (MSAPPHIRERAPIDS)
#  36. Intel Rocket Lake (MROCKETLAKE)
#  37. Intel Alder Lake (MALDERLAKE)
#  38. Intel Raptor Lake (MRAPTORLAKE)
#  39. Intel Meteor Lake (MMETEORLAKE)
#  40. Intel Emerald Rapids (MEMERALDRAPIDS)
#  41. Generic-x86-64 (GENERIC_CPU)
#  42. Intel-Native optimizations autodetected by the compiler (MNATIVE_INTEL)
#  43. AMD-Native optimizations autodetected by the compiler (MNATIVE_AMD)
: "${_subarch:=""}"

# Selects the x86-64 microarchitecture to compile for.
# This value is only used by the GENERIC_CPU
# subarchitecture and is required.
# Can be either '1', '2', '3' or '4'
# 
# Set to '1' by default
#
# For more information see:
# https://en.wikipedia.org/wiki/X86-64#Microarchitecture_levels
: "${_subarch_microarch:="1"}"


# Enable compilation with LLVM
# Be warned, this is largely untested by me (JeremyStarTM). It *should* work,
# but if it doesn't, write a comment and I'll fix it.
# 
# Set to anything but null to activate.
: "${_use_llvm_lto:=""}"

# Debug options
# This allows you to enable or disable debug options.
# Set to 'y' to force enable, 'n' to force disable or '' to ignore debug options.
# Leaving the setting empty will use the kernel configuration setting to determine
# if debug options shall be enabled/disabled.
# 
# Set to anything but null to activate.
: "${_debug:=""}"

# Show full compilation output
# Enabling this will cause 'make' to display
# all targets currently compiling instead of
# the 'pv' magic we're doing.
#
# Set to anything but null to activate.
: "${_show_compile:=""}"

### BUILD OPTIONS END

### DEPRECATED BUILD OPTIONS START

# See '_use_current'
: "${_reuse_current:=""}"

# See '_optimize_defconfig'
: "${_update_kconfig_on_reuse:=""}"

### DEPRECATED BUILD OPTIONS END


# Kernel version
_kernel_major=6.12
_kernel_minor=10
# Clear Linux patches version
_clr=9-1535
# kernel_compiler_patch version
_kernelcompilerpatch="20241018"
# Source directory names
_src_linux=linux-${_kernel_major}
_src_clr=${_kernel_major}.${_clr}

# Package information
pkgbase=linux-clear-cjktty-zfs
pkgver=${_kernel_major}.${_kernel_minor}
pkgrel=1
pkgdesc="Clear Linux内核,带有zfs和cjktty并开启kexec"
arch=("x86_64")
url="https://git.staropensource.de/JeremyStarTM/aur-linux-clear"
license=(GPL-2.0-only)
makedepends=("bc" "cpio" "gettext" "git" "libelf" "pahole" "perl" "python" "tar" "xz" "zstd")
[[ -n "${_use_llvm_to}" ]] && makedepends+=("clang" "llvm" "lld")
[[ -z "${_show_compile}" ]] && makedepends+=("pv")
options=("!strip" "!debug")
[[ "${_debug}" == "y" ]] && options=("!strip")
source=(
  "https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-${_kernel_major}.tar.xz"
  "https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-${_kernel_major}.tar.sign"
  "https://cdn.kernel.org/pub/linux/kernel/v6.x/patch-${_kernel_major}.${_kernel_minor}.xz"
  "cl-linux::git+https://github.com/clearlinux-pkgs/linux.git#tag=${_src_clr}"
  "more-uarches-${_kernelcompilerpatch}.tar.gz::https://github.com/graysky2/kernel_compiler_patch/archive/${_kernelcompilerpatch}.tar.gz"
  "git+https://github.com/openzfs/zfs.git#tag=zfs-2.3.0"
  "0001-cjktty.patch::https://github.com/bigshans/cjktty-patches/raw/master/v6.x/cjktty-6.9.patch"
  "0002-cjktty-32.patch::https://github.com/bigshans/cjktty-patches/raw/master/cjktty-add-cjk32x32-font-data.patch"
)

[[ -n "${_use_llvm_lto}" ]] && BUILD_FLAGS=("LLVM=1" "LLVM_IAS=1")

export "KBUILD_BUILD_HOST=archlinux"
export "KBUILD_BUILD_USER=${pkgbase}"
export "KBUILD_BUILD_TIMESTAMP=$(date -Ru${SOURCE_DATE_EPOCH:+d @$SOURCE_DATE_EPOCH})"

# Check for deprecated settings
_check_deprecated_settings() {
    if [ -n "${_update_kconfig_on_reuse}" ]; then
        warning "Please switch to using '_update_kconfig_on_reuse' flag instead of '_optimize_defconfig'"
        _optimize_defconfig="y"
    fi
    if [ -n "${_reuse_current}" ]; then
        warning "Please switch to using '_use_current' flag instead of '_reuse_current'"
        _use_current="y"
    fi
}

# Applies all patches
_apply_patches() {
    # Patch with kernel version patches
    patch -Np1 -i ../patch-${_kernel_major}.${_kernel_minor} || true
    
    # Set version
    echo "-${pkgrel}" > localversion.10-pkgrel
    echo "${pkgbase#linux}" > localversion.20-pkgname
    
    # Patch with Clear Linux patches
    for i in $(grep '^Patch' "${srcdir}"/cl-linux/linux.spec|grep -Ev '^Patch0132|^Patch0109|^Patch0118|^Patch0113|^Patch0138|^Patch0139|^Patch0147' | sed -n 's/.*: //p'); do
        if [ -n "${_use_llvm_lto}" ]; then
            if [ "${i}" == "0133-novector.patch" ] ; then
                continue
            fi
        fi
        
        patch -Np1 -i "${srcdir}/cl-linux/${i}" || true
    done

    # Patch with kernel_compiler_patch patches.
    # Do this before any defconfig invocations so we
    # have all of the extra selectable uarches ready and selectable
    patch -Np1 -i "$srcdir/kernel_compiler_patch-$_kernelcompilerpatch/more-ISA-levels-and-uarches-for-kernel-6.1.79+.patch"
}

# Allows user to modify the kernel config
_modify_defconfig() {
    [[ -n "$_makemenuconfig" ]] && make ${BUILD_FLAGS[*]} menuconfig
    [[ -n "$_makexconfig" ]] && make ${BUILD_FLAGS[*]} xconfig
    [[ -n "$_makenconfig" ]] && make ${BUILD_FLAGS[*]} nconfig

    # Don't crash if all three are false
    true
}

# Copies the kernel config
_copy_defconfig() {
    local _cur_major_ver="$(uname -r | grep -o '[0-9]*[0-9]\.[0-9]*[0-9]')"
    [[ "${_cur_major_ver}" != "${_kernel_major}" ]] &&
        warning "Major version was updated, you should regen the defconfig"

    if [[ -s /proc/config.gz ]]; then
        # modprobe configs
        zcat /proc/config.gz > ./.config
        make ${BUILD_FLAGS[*]} olddefconfig
    else
        warning "Your kernel was not compiled with IKCONFIG_PROC."
        warning "Unable to read kernel configuration, aborting."
        exit
    fi
}

# Updates the kernel config
_update_defconfig() {   
    # Copy configuration file (if found)
    if [ -f "${startdir}/kconfig" ]; then
        echo ":: Using configuration file \"${startdir}/kconfig\""
        cp -Tf "${startdir}/kconfig" ./.config
    else
        echo ":: Using configuration file \"${srcdir}/${pkgbase}/config\""
        cp -Tf $srcdir/cl-linux/config ./.config
    fi
    
	# 添加cjktty补丁
	local src
	for src in "${source[@]}"; do
		src="${src%%::*}"
		src="${src##*/}"
		src="${src%.zst}"
		[[ $src = *.patch ]] || continue
		echo "Applying patch $src..."
		patch -Np1 <"../$src"
	done

	# 编译zfs前面的准备
	make ${BUILD_FLAGS[*]} CFLAGS="-O2 -march=native" CXXFLAGS="-O2 -march=native -lstdc++" prepare -j$(nproc)
	make ${BUILD_FLAGS[*]} CFLAGS="-O2 -march=native" CXXFLAGS="-O2 -march=native -lstdc++" modules_prepare -j$(nproc)

	# 添加zfs补丁
	cd ${srcdir}/"zfs"
	./autogen.sh
	sed -i "s|\$(uname -r)|${pkgver}-clear-cjktty-zfs|g" configure
	./configure CC=gcc --prefix=/usr --sysconfdir=/etc --sbindir=/usr/bin --libdir=/usr/lib \
		--datadir=/usr/share --includedir=/usr/include --with-udevdir=/lib/udev \
		--libexecdir=/usr/lib/zfs --with-config=kernel \
		--enable-linux-builtin=yes \
		--with-linux=${srcdir}/${_src_linux} \
		--with-linux-obj=${srcdir}/${_src_linux}
	./copy-builtin ${srcdir}/${_src_linux}

	# 开启zfs选项
	cd ${srcdir}/${_src_linux}
	scripts/config -e CONFIG_ZFS

    # 开启cjktty补丁
    scripts/config -e CONFIG_FONT_CJK_16x16 \
        -e CONFIG_FONT_CJK_32x32

    # 为了双内核开启kexec相关东西
    scripts/config -e CONFIG_ARCH_SUPPORTS_KEXEC \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_FILE \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_SIG \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG \
        -e CONFIG_ARCH_SUPPORTS_KEXEC_JUMP \
        -e CONFIG_ARCH_SUPPORTS_CRASH_DUMP \
        -e CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG

    # 为了unraid硬盘版,开启虚拟usb设备
    scripts/config -m CONFIG_USB_DUMMY_HCD \
        -m CONFIG_USB_MASS_STORAGE

    # Extra configuration
    # General setup
    scripts/config --set-str DEFAULT_HOSTNAME archlinux \
                   -e IKCONFIG \
                   -e IKCONFIG_PROC \
                   -u RT_GROUP_SCHED
    # Power management and ACPI options
    scripts/config -e ACPI_REV_OVERRIDE_POSSIBLE \
                   -e ACPI_TABLE_UPGRADE
    # Virtualization
    scripts/config -e KVM_SMM
    # General architecture-dependent options
    scripts/config -e KPROBES
    # Enable loadable module support
    scripts/config -u MODULE_SIG_FORCE
    # Networking support
    scripts/config -e NETFILTER_INGRESS
    # Device Drivers
    scripts/config -e FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER \
                   -e DELL_SMBIOS_SMM \
                   -m PATA_JMICRON \
                   -E SOUND SOUND_OSS_CORE \
                   -e SND_OSSEMUL \
                   -M SND_OSSEMUL SND_MIXER_OSS \
                   -M SND_MIXER_OSS SND_PCM_OSS \
                   -E SND_PCM_OSS SND_PCM_OSS_PLUGINS \
                   -m AGP -M AGP AGP_INTEL -M AGP_INTEL AGP_VIA
    # Kernel hacking -> Compile-time checks and compiler options -> Make section mismatch errors non-fatal
    scripts/config -e SECTION_MISMATCH_WARN_ONLY
    # File systems
    scripts/config -m NTFS3_FS \
                   -e NTFS3_LZX_XPRESS \
                   -e NTFS3_FS_POSIX_ACL
    scripts/config -m SMB_SERVER \
                   -e SMB_SERVER_SMBDIRECT \
                   -e SMB_SERVER_CHECK_CAP_NET_ADMIN \
                   -e SMB_SERVER_KERBEROS5
    # Security options
    scripts/config -e SECURITY_SELINUX \
                   -e SECURITY_SELINUX_BOOTPARAM \
                   -e SECURITY_SMACK \
                   -e SECURITY_SMACK_BRINGUP \
                   -e SECURITY_SMACK_NETFILTER \
                   -e SECURITY_SMACK_APPEND_SIGNALS \
                   -e SECURITY_TOMOYO \
                   -e SECURITY_APPARMOR \
                   -e SECURITY_YAMA
    # Security options -> Landlock options
    scripts/config -e SECURITY_LANDLOCK
    # Library routines
    scripts/config -k -e FONT_TER16x32
    
    # Enable LLVM compilation
    [[ -n "${_use_llvm_lto}" ]] && scripts/config -d LTO_NONE \
                                                  -e LTO \
                                                  -e LTO_CLANG \
                                                  -e ARCH_SUPPORTS_LTO_CLANG \
                                                  -e ARCH_SUPPORTS_LTO_CLANG_THIN \
                                                  -e HAS_LTO_CLANG \
                                                  -e LTO_CLANG_THIN \
                                                  -e HAVE_GCC_PLUGINS
    
    # Enable or disable debug settings
    [[ "${_debug}" == "y" ]] && scripts/config -e DEBUG_INFO \
                                               -e DEBUG_INFO_BTF \
                                               -e DEBUG_INFO_DWARF4 \
                                               -e PAHOLE_HAS_SPLIT_BTF \
                                               -e DEBUG_INFO_BTF_MODULES
    [[ "${_debug}" == "n" ]] && scripts/config -d DEBUG_INFO \
                                               -d DEBUG_INFO_BTF \
                                               -d DEBUG_INFO_DWARF4 \
                                               -d PAHOLE_HAS_SPLIT_BTF \
                                               -d DEBUG_INFO_BTF_MODULES
    
    # Run olddefconfig
    make ${BUILD_FLAGS[*]} olddefconfig
    diff -u $srcdir/cl-linux/config .config || :

    # Here we slightly break the config by removing one of the
    # members of the 'Processor family' selection.
    # This causes oldconfig to always invoke that selection.
    sed -i '/CONFIG_GENERIC_CPU/d' .config || :
    # For a slim chance that someone is building X86_32
    sed -i '/CONFIG_M686/d' .config || :

    case ${_subarch} in
        "")
            # Ask for subarch if none provided
            make "${BUILD_FLAGS[@]}" oldconfig
            ;;
        "41" | "GENERIC_CPU")
            scripts/config -e GENERIC_CPU
            scripts/config --set-val X86_64_VERSION "${_subarch_microarch}"
            make "${BUILD_FLAGS[@]}" oldconfig
            ;;
        [1-9]|[1-3][0-9]|[4][0-3]|43)
            # 1 to 9, 10 to 39, 40 to 43
            # 43 is the last supported value here, refer to the _subarch
            # documentation above and keep the last section of this check
            # in sync with the supported value.
            # stderr checks below shouldn't be needed with the above check in place,
            # but will be left in-place regardless in case of future updates
            # breaking something

            # We're only interested in stderr
            {
                local __ERROR=$(echo "${_subarch}" | make "${BUILD_FLAGS[@]}" oldconfig 2>&1 1>&$out)
            } {out}>/dev/null

            # Invoke echo to sanitize the __ERROR, it can contain a newline or a \r
            # symbol, thus breaking the script
            if [[ -n "$(echo $__ERROR)" ]]; then
                warning "Selected subarch: ${_subarch} is not supported"
                exit
            fi
            ;;
        *)
            # String - check if it exists in .config and if it does - set it
            if grep -q -e "CONFIG_${_subarch}[[:space:]]" -e "CONFIG_${_subarch}=" .config; then
                # Check if option exists in .config
                scripts/config -e "${_subarch}"
                make "${BUILD_FLAGS[@]}" olddefconfig
            else
                warning "Unrecognized subarch value: ${_subarch}"
                exit
            fi
            ;;
    esac
}

# Prepares the installation
prepare() {
    cd "${_src_linux}" || exit 1

    _check_deprecated_settings
    _apply_patches

    [[ -n "${_use_current}" ]] && _copy_defconfig
    [[ -n "${_optimize_defconfig}" ]] || [[ -z "${_use_current}" ]] && _update_defconfig
    
    # Read and apply modprobed database
    # See https://aur.archlinux.org/packages/modprobed-db
    [[ -n "${_localmodcfg}" ]] &&
        if [ -e "${HOME}/.config/modprobed.db" ]; then
            make ${BUILD_FLAGS[*]} LSMOD=${HOME}/.config/modprobed.db localmodconfig
        else
            echo ":: No modprobed.db file was found at ${HOME}/.config, skipping"
        fi

    # Open configuration editors
    _modify_defconfig

    # Save configuration
    # shellcheck disable=SC2015
    [[ -n "${_copyfinalconfig}" ]] && cp -Tf ./.config "${startdir}/kconfig-new" || true

    # Write kernel version
    make -s kernelrelease > version
}

# Build kernel
build() {
    cd "${_src_linux}" || exit 1
    if [ -n "${_show_compile}" ]; then
        make ${BUILD_FLAGS[*]} all
    else
        make ${BUILD_FLAGS[*]} all | pv -l -F "Elapsed time: %t, targets per sec: %a" > /dev/null
    fi
}

# Packages the kernel package
_package() {
    pkgdesc="${pkgdesc} 此包包括内核和已编译的模块"
    depends=("coreutils" "kmod" "initramfs")
    optdepends=("wireless-regdb: to set the correct wireless channels of your country"
                "linux-firmware: firmware images needed for some devices")
    provides=(VIRTUALBOX-GUEST-MODULES WIREGUARD-MODULE KSMBD-MODULE)
    install=linux.install
    
    cd "${_src_linux}" || exit 1
    local "modulesdir=${pkgdir}/usr/lib/modules/$(<version)"
    
    # Create boot image
    # systemd expects to find the kernel there to allow hibernation
    # https://github.com/systemd/systemd/commit/edda44605f06a41fb86b7ab8128dcf99161d2344
    install -Dm644 "$(make -s image_name)" "${modulesdir}/vmlinuz"
    
    # Used by mkinitcpio to name the kernel
    echo "${pkgbase}" | install -Dm644 /dev/stdin "${modulesdir}/pkgbase"
    
    # Install modules
    ZSTD_CLEVEL=19 make ${BUILD_FLAGS[*]} INSTALL_MOD_PATH="${pkgdir}/usr" INSTALL_MOD_STRIP=1 \
        DEPMOD=/doesnt/exist modules_install  # Suppress depmod
    
    # Remove build directory
    rm "${modulesdir}"/build
}

# Packages the headers package
_package-headers() {
    pkgdesc="${pkgdesc} 此包包括用于构建内核模块的头文件和脚本"
    depends=("pahole")
    
    cd "${_src_linux}" || exit 1
local "builddir=${pkgdir}/usr/lib/modules/$(<version)/build"
    
    install -Dt "${builddir}" -m644 .config Makefile Module.symvers System.map \
        localversion.* version vmlinux
    install -Dt "${builddir}/kernel" -m644 kernel/Makefile
    install -Dt "${builddir}/arch/x86" -m644 arch/x86/Makefile
    cp -t "${builddir}" -a scripts
    
    # Required when STACK_VALIDATION is enabled
    install -Dt "${builddir}/tools/objtool" tools/objtool/objtool
    
    # Required when DEBUG_INFO_BTF_MODULES is enabled
    [[ -f tools/bpf/resolve_btfids/resolve_btfids ]] && install -Dt "${builddir}/tools/bpf/resolve_btfids" tools/bpf/resolve_btfids/resolve_btfids
    
    cp -t "${builddir}" -a include
    cp -t "${builddir}/arch/x86" -a arch/x86/include
    install -Dt "${builddir}/arch/x86/kernel" -m644 arch/x86/kernel/asm-offsets.s
    
    install -Dt "${builddir}/drivers/md" -m644 drivers/md/*.h
    install -Dt "${builddir}/net/mac80211" -m644 net/mac80211/*.h
    
    # https://bugs.archlinux.org/task/13146
    install -Dt "${builddir}/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h
    
    # https://bugs.archlinux.org/task/20402
    install -Dt "${builddir}/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h
    install -Dt "${builddir}/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h
    install -Dt "${builddir}/drivers/media/tuners" -m644 drivers/media/tuners/*.h
    
    # https://bugs.archlinux.org/task/71392
    install -Dt "${builddir}/drivers/iio/common/hid-sensors" -m644 drivers/iio/common/hid-sensors/*.h
    
    find . -name 'Kconfig*' -exec install -Dm644 {} "${builddir}/{}" \;
    
    # Remove redundant architectures
    local arch
    for arch in "${builddir}"/arch/*/; do
        [[ $arch = */x86/ ]] && continue
        echo "Removing $(basename "${arch}")"
        rm -r "${arch}"
    done
    
    # Remove documentation
    rm -r "${builddir}/Documentation"
    
    # Remove broken symlinks
    find -L "${builddir}" -type l -printf "Removing %P\n" -delete
    
    # Remove loose objects
    find "${builddir}" -type f -name '*.o' -printf "Removing %P\n" -delete
    
    # Strip build tools
    local file
    while read -rd "" file; do
        case "$(file -Sib "$file")" in
            application/x-sharedlib\;*)      # Libraries (.so)
                strip -v $STRIP_SHARED "$file" ;;
            application/x-archive\;*)        # Libraries (.a)
                strip -v $STRIP_STATIC "$file" ;;
            application/x-executable\;*)     # Binaries
                strip -v $STRIP_BINARIES "$file" ;;
            application/x-pie-executable\;*) # Relocatable binaries
                strip -v $STRIP_SHARED "$file" ;;
        esac
    done < <(find "${builddir}" -type f -perm -u+x ! -name vmlinux -print0)
    
    # Strip vmlinux
    strip -v $STRIP_STATIC "${builddir}/vmlinux"
    
    # Add symlink to build directory
    mkdir -p "$pkgdir/usr/src"
    ln -sr "${builddir}" "$pkgdir/usr/src/$pkgbase"
}

pkgname=("$pkgbase" "$pkgbase-headers")
for _p in "${pkgname[@]}"; do
  eval "package_$_p() {
    $(declare -f "_package${_p#"$pkgbase"}")
    _package${_p#"$pkgbase"}
  }"
done

# Taken from https://www.kernel.org/signature.html
validpgpkeys=(
  "ABAF11C65A2970B130ABE3C479BE3E4300411886"  # Linus Torvalds
  "647F28654894E3BD457199BE38DBBDC86092693E"  # Greg Kroah-Hartman
  "E27E5D8A3403A2EF66873BBCDEA66FF797772CDC"  # Sasha Levin
  "AC2B29BD34A6AFDDB3F68F35E7BFC8EC95861109"  # Ben Hutchings
)
sha256sums=("b1a2562be56e42afb3f8489d4c2a7ac472ac23098f1ef1c1e40da601f54625eb"
            "SKIP"
            "99168905b0a1eccd88205e85d982c762fe84dc268806e851ba80828c120852a1"
            "SKIP"
            "b3fd8b1c5bbd39a577afcccf6f1119fdf83f6d72119f4c0811801bdd51d1bc61"
            'SKIP'
            'SKIP'
            'SKIP')