path: root/binkd.conf

# Binkd sample configuration file
# Copyright (C) 1996-1997 by Dima Maloff, 2:5047/13
# $Id: binkd.conf,v 1.3 2012/01/22 13:54:12 green Exp $

#
# Path and name for the logfile, loglevel
#
log /var/log/binkd/binkd
loglevel 6

#
# Your FTN domains:
#   domain <name> <main-outbound> <default-zone> [<root-domain>]
# or
#   domain <new-name> alias-for <name>
# First specified domain sets as default domain for the 3D/4D addresses.
#
domain fidonet /var/spool/ftn/outbound/fidonet 2
#
#  Aliases to support known wrong 5D configurations
domain fido        alias-for fidonet
domain fidorus     alias-for fidonet
domain fido7       alias-for fidonet
#
#  Aliases to support known DNS domain zones
#  (some people is mix up the terms "FTN domain" and "DNS internet domain")
domain fidonet.org alias-for fidonet
domain fidonet.net alias-for fidonet


#
# Your addresses, 5D or 4D or 3D:
#   address <addr1> ...
# If first address specified as 3D/4D then domain for it sets from domain
# defined in the first "domain" token. If second and more addresses specified
# as 3D/4D then domain sets from first address.
#
address 2:5047/999@fidonet 2:5020/999.1@fidonet

#
# Hide or present the specified AKAs if remote AKAs match the address mask
#       hide-aka <my-aka> [!]<mask>
#       present-aka <add-aka> [!]<mask>
# Mask is compared to the 5d-form of address string, `*' matches any number
#       of any symbols (so you have to write '2:5020/*' but not '5020/*')
# Use `!' to invert the mask
# These rules apply in the same order as in config, you can present any address
#
#hide-aka 2:5020/999.* !2:*@fidonet      # hide aka from all but fido zone 2
#present-aka 2:5047/999.1 2:5047/*.0*    # present aka to all nodes in 2:5047

#
# The name of your system, its location and your name
#
sysname "Ivan's BBS"
location "Magadan, Russia"
sysop "Ivan Ivanov"

#
# System capabilities
#
nodeinfo 115200,TCP,BINKP

#
# Uncomment it if you want binkd's log at your console
#
conlog 4

#
# If a log message matches one of these masks it won't be written to log
# (masks are in shell/glob style, case-insensitive)
#
#nolog "*socket # [0-9]*"
#nolog "*.[bc]sy"

#
# Uncomment if you want T-Mail(FrontDoor)-style binary log
# (Will work and have sense on PCs only?)
#
#binlog binkd.sts
#fdinhist in.his
#fdouthist out.his

#
# TCP settings. Leave this unchanged if not sure.
#
# Suffixes for time intervals are w for weeks, d for days,
# h for hours, m for minutes, s or no suffix for seconds.
# You can mix the suffixes, i.e. 1d12h is the same as 36h.
#
#iport binkp
#oport binkp
#oblksize 4096
#timeout 5m
#connect-timeout 5m
#bindaddr 192.168.0.3

#
# Zlib compression parameters (if built with zlib support)
#     zlevel          - compression level (zlib only, bzlib2 uses 100kb always),
#                       set to 0 to use default value of 6
#     zminsize <size> - files smaller than <size> won't be compressed anyway
# Rules:
#     zallow <mask1>[ <mask2>... <maskN>] - allow compression for the masks
#     zdeny  <mask1>[ <mask2>... <maskN>] - deny compression for the masks
# If remote accepts compressed blocks (OPT GZ) its name will be checked
# against these rules before sending each file. If the name matches a zallow
# rule the file will be sent with compression. If the name matches a zdeny rule
# it will be sent as-is. The rule matched first is applied. If a file doesn't
# match any rule zdeny is assumed.
#
#zminsize 1024
#
#zallow *.pkt
#zdeny *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa?
#zdeny *.zip *.rar *.arj *.ha *.gz *.tgz *.bz2 *.z[0-9][0-9] *.r[0-9][0-9]
#zallow *

#
# Compression dll names, for win32 versions built with ZLIBDL
#
#zlib-dll   zlib.dll
#bzlib2-dll bzlib2.dll

#
# HTTPS or SOCKS settings.
#
# proxy 192.168.0.3:3128        # <- regular http/https proxy (i.e. squid)
# proxy 192.168.0.3:3128/user/password  # <- proxy required username/password
#                                       #    (as in browser)
#
# proxy 192.168.0.3:3128/user/password/your_host/your_domain
#   ^- proxy required NTLM authorization with username/password
#   your_host   -- Windows host name without domain (i.e. MY_HOST)
#   your_domain -- Windows domain name (not FQDN, i.e. DEFAULT_DOMAIN)
#
# socks 192.168.0.3:1080        # <- socks4 proxy
# socks 192.168.0.3:1080/       # <- socks5 proxy without authorization
# socks 192.168.0.3:1080/user/password  # <- socks5 proxy with username/password
#                                       #    (RFC-1929)

#
# Delay of calls and outbound rescans in seconds
#
#call-delay 1m
#rescan-delay 1m

#
# Max. number of inbound/outbound connections
#
#maxservers 2
#maxclients 2

#
# Binkd will try to call a node N times. If failed it will
# hold the node for S seconds. The feature is off by default.
#
try 10
hold 10m

#
# hold-skipped <S>
# Binkd will hold for S seconds all mail skipped by a node. (Def. -- 1h)
#
#hold-skipped 1h

#
# Don't send (only receive) files if no password for an inbound session
#
send-if-pwd

# Tzoff corrects UTC time returned by time() under DOS-derived OS
# Using system TZ variable or tzselect(8) is preferred.
#tzoff 3h

#
# Use syslog (Only if made with -DHAVE_VSYSLOG and -DHAVE_FACILITYNAMES)
#
#syslog local0

#
# Print percents while sending or receiving
#
percents

#
# List queue after rescans
#
printq

#
# Perform reverse resolving (for logging only)
#
backresolv

#
# Log pid:
#
pid-file /var/run/ftn/binkd.pid

#
# Map paths in flo's:
#   ftrans <old-string> <new-string>
# Use as many ftrans's as you want.
#
#ftrans "D:\\fido\\outbound" "/var/spool/fido/outb"
#ftrans "\\" "/" # this replaces all slashes in a path

#
# Inbound directories for secure and non-secure links
#
inbound /var/spool/ftn/inbound
inbound-nonsecure /var/spool/ftn/inbound-unsecure

#
# Directory for incomplete receiving files (.hr and .dt),
# default to inbound for the node
#
temp-inbound /var/spool/ftn/inbound-temp

#
# Binkd will skip all files from a node if
# size_of_the_next_file_for_us_there + minfree < free_space_in_inbound
# The zero value and the value 4294967295 (2**32-1) is equivalented to infinity.
#
minfree 2048
minfree-nonsecure 2048

#
# When trying to receive a new file: remove partial files with this
# name but different size or time from inbound. (If commented out, binkd
# will left old parts as .dt and .hr in the inbound directory)
#
kill-dup-partial-files

#
# Remove all old partial files from inbound. (OFF if commented out)
#   kill-old-partial-files <max-age-in-seconds>
#
kill-old-partial-files 1d

#
# Remove old .bsy/.csy files (If some are left after a system crash). It would
# be wise to set this to 12h on almost any system. (Note that binkd always
# touches .bsy's/.csy's for active sessions)
#
# kill-old-bsy is OFF by default.
#
kill-old-bsy 12h

#
# Create a flag file after receiving a file
#
#flag toss!.now *.pkt
#flag toss!.now *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa?

#
# Run an external program.
# The "*S" macro in command line substed with S.R.I.F., see !SRIF.TXT
# The "!" before program pathname means immediate program execution
#   after receiving the file.
# *** win32 only:
# The "@" before program pathname means execute program in separate console
# The "@@" before program pathname means execute program in hidden console
# ***
# Macros: *F - complete name of received file,
#         *A0..*A9 - first 10 AKA of remote system,
#         *A*, *A@ - list of all remote AKA separated by spaces
#         *P - password protected [0|1],
#         *L - listed system [0|1]
#         *H - remote hostname or IP,
#         *N - short file name (win32 only).
#
#exec "my-freq-processor /options *S" *.req
#exec "my-pkt-unpacker /options *S" *.pkt
#exec "my-tosser /options"  c:\\bbs\\inbound\\????????.[mwtfs][oehrau][0-9a-zA-Z]
#exec "nice -n 19 hpt toss link" /var/spool/ftn/inbound/*.[STFWMstfwm][ouaherOUAHER][0-9A-Za-z] *.[pP][kK][tT]

#
# Include a file
#
#include /etc/ftn/binkd.inc

#
# Overrides root domain for DNS lookups, see `node' below.
#
#root-domain fidonet.net

#
# Scan T-Mail boxes (short and long)
#
#filebox   d:\\fido\\tmail\\boxes

#
# Scan theBrake! long boxes
#
#brakebox  d:\\fido\\brake\\boxes
brakebox  /var/spool/ftn/longbox

#
# Should binkd delete empty boxes?
# Uncomment the following line, if yes
#
#deletebox

#
# Scan node outbound while connecting and send mail size to remote
#
prescan

# t-mail or ifcico (qico) password file.
# Format of the password file:
#   [password] <FTN address> <inpwd>[,[<pktpwd>][,<outpwd>]]
# where:
#   [password]               optional "password" token;
#   <FTN address>            address of a link in the form 1:2/3.4@domain
#                            or 1:2/3@domain or 1:2/3 or 1:2/3.4;
#   <inpwd>                  password for incoming sessions;
#   <pktpwd>                 packet password, used when "share" token
#                            is handled;
#   <outpwd>                 password for outgoing sessions.
# Any password is one word without spaces or tabs. If <pktpwd> or <outpwd>
# is omitted, it is assumed equal to <inpwd>. If a password is defined for
# a node by the "node" token then the passwords for the node in the password
# file are ignored.
#
#passwords /etc/ftn/passwords

#
# Skip files:
#    skip [all|listed|unlisted|secure|unsecure] [!]<sizeKb>|- <mask>...
#
#       'all'    applies to all sessions (default)
#       'listed' applies to sessions with the nodes defined by 'node' keyword
#       'secure' applies to password-protected sessions
#
# Use '!' before size for destructive skip, default is non-destructive one.
# If <size> > 0 then only files larger than <size> in kilobytes are skipped,
#       zero <size> applies to all files,
#       if <size> is set to '-' then the rule allows any file by <mask>'s
#
# <mask> is a shell-style mask, case-insensitive (except for symbols in [])
#       multiple masks for a rule are permitted
#
# Policy for rule processing is first-match
#
#skip all 0 *.mp3 *.avi
#skip unsecure 256 *.pkt
#skip unsecure !0 *

#
# Overwrite the existing file by the new received,
# do not save with the changed extension
#
#overwrite net_*.*

#
# Inbound filename case:
#    inboundcase [save(default)|upper|lower|mixed]
#
#   'save'  don't change filename case (default)
#   'upper' uppercase filename (FILE-NAME.EXT)
#   'lower' lowercase filename (file-name.ext)
#   'mixed' make filename pretty (File-Name.Ext)
#
# * tested only with english filenames
#
#inboundcase save

#
# Should binkd send empty files?
#    dont-send-empty [no(default)|arcmail|yes]
#
#   'no'      inhibit only sending *.?ut (netmail) with size <=60 bytes
#   'arcmail' do not send zero-size arcmail and pkt <= 60 bytes
#   'yes'     do not send all zero-size files and pkt <= 60 bytes
#
#dont-send-empty no

#
# Should binkd delete empty point dirs in BSO?
# Uncomment the following line, if yes
#
#deletedirs

#
# Use Amiga Style Outbound (ASO)
#
#aso

#
# Limit bandwidth (rate):
#    limit-rate [all|listed|unlisted|secure|unsecure] <rate>[kM%]|- <mask>...
#
#    <rate> is a max allowed rate in bytes-per-second (k=kbytes, M=Mbytes),
#           if % is specified, the node -bw rate is multiplied by this value
#           in percents, if - then rate is unlimited
#    <mask> is a filename mask to apply this rule to
#
#    limit-rate rules are checked in the order they appear in config, first
#    matcing rule is applied
#
#    IMPORTANT! If a node has no explicitly defined bandwidth limit, the
#    defnode's limit is used. If defnode has no limit, rate is unlimited.
#
#limit-rate unsecure -  *.pkt
#limit-rate unsecure 2k *

# Define shared aka
#     Add a shared-address as aka for any node from this list, so that 
#     uncompessed netmail for shared aka will be sent in the first session with
#     any node listed in shares; packet header will be updated to match this
#     node's main aka and pkt password
# share <shared-address> <node1> [<node2> ...]
# example:
#share 2:999/999 2:5020/52 2:5020/238

#
# Check the sender's address in incoming pkt's, change the file extension
# to <ext>, if the check failed
#      check-pkthdr [all|secure|unsecure|listed|unlisted] <ext>
#
#       'all'    applies to all nodes
#       'listed' applies, if at least one aka is defined by 'node' keyword
#       'secure' applies, if at least one aka is password-protected
#
# It's ok to specify .<ext> as well as <ext> - the dot before ext is ignored
# Flag order: -nohc (for any aka), -hc (for any aka), check-pkthdr flag
#
#check-pkthdr secure .sec

#
# Define a link:
#       node [[z:]n/]n[.p][@domain] [-nr|-nd] [-md] [-hc|-nohc] [-ip|-sip] [-bw <send_rate>[/<recv_rate>]] [-4|-6] [{hosts|-} [{<inpwd>[,[<pktpwd>][,<outpwd>]]|-} [flavour [{obox|-} [{ibox|-}]]]]]
#
# * All non-"-" fields will redefine the values specified for the same node
#   earlier in config.
# * The meaning of <inpwd>, <pktpwd> and <outpwd> is the same as in
#   the description of the "passwords" token. Any password is one word
#   without spaces or tabs. If <pktpwd> or <outpwd> is omitted, it is
#   assumed equal to <inpwd>.
# * Flavour is one of i, c, d, -, h; and is the flavour for the outbound
#   filebox ("obox").
# * Binkd sends from obox all non-dir entries NOT matching ".*" wildcard.
#   EVERY TIME YOU PUT A FILE INTO OBOX CHECK IF BINKD WILL BE ABLE TO
#   UNLINK IT. Otherwise, the session will never end.
# * Default for ibox is inbound or inbound-nosecure depending on the pwd field.
# * Default for port is oport.
# * `-nr' stands for `Not Reliable Link', this works only on outbound calls
#   with another binkp/1.1 mailer. The option solves the only problem with
#   binkd having no enough time to start receiving of a file from
#   non-zero offset before IP link's down, so don't use it unless you
#   have this problem -- really not effective
# * `-nd' means "No Dupe Mode", this works only on outbound calls with
#   another binkd 0.9.3 or higher. The option solves problem with
#   duplicating files while losts carrier but link is a bit slower
#   then with "-nr" option
# * `-md' means "Must have CRAM-MD5". This works only with nodes with
#       binkd or argus supported this method. Do not set it if your link
#       can use the old version of binkd.
# * `-nomd' - do not use CRAM-MD5 for this node (send plain text password)
# * `-hc' enables check of sender address in pkt header for this node/aka
#       (overrides the setting of the 'check-pkthdr' statement)
# * `-nohc' disables check of sender address in pkt header for this node/aka
#       (overrides the setting of the 'check-pkthdr' statement)
# * `-ip' means "Remote IP check". In this case the node will be
#       rejected, if it comes not from one of its IP-addresses.
#       Remote AKAs with bad IP-address will be dropped on outgoing calls.
# * `-sip' means "Strict remote IP check". Like "-ip", but node will be
#       rejected, if no IP-addresses allowed ("-" or not resolved).
#       Remote AKAs with bad IP-address will be dropped on outgoing calls.
# * `-bw' specifies bandwidth (rate) limit for this node
#       if one value is specified, it's used as both send and recv limit
#       if two values are specified, first is for send and second - for recv
#       rate values are expected to be in format `<rate>[kM%]|-'
#       (see limit-rate keyword for detailed description)
# * `-noproxy' disables usage of proxy/socks server when calling this node
#       (node expected to be inside local network)
# * `-4' only connect via IPv4
# * `-6' only connect via IPv6
# * Hosts is a list in form
#       host1[:port1][;host2[:port2]] ...
# * Asterisk (`*') in the host list forces Binkd to perform
#       1:2/3.4 --> p4.f3.n2.z1.fidonet.net translation for a node's
#       Fido-address and lookup IP for the resulting FQDN in DNS.
#       Root domain part ("fidonet.net") can be changed with root-domain
#       keyword.
#
#node 5047/888 - password
#node 5047/999 -md hostname;* password i /var/spool/ftn/personalboxes/to999 /var/spool/ftn/personalboxes/from999

#
# Default node flags. Binkd will call an unlisted node if "defnode" defined.
#
defnode -nd *

#
# Perl hooks file (if built with Perl)
#
#perl-hooks test.pl

#
# Perl DLL file (only matters if compiled with PERLDL=1 for Win32)
#
#perl-dll perl56.dll

#
# binkd will refuse to start, if perl-hooks script has compilation errors
#      Note, that run-time errors still can occur
#
#perl-strict

#
# This variables can be used in perl hooks as $cfg{"name"}
#  Syntax: perl-var <name> <value>
#
#perl-var nodelist /var/lib/ftn/nodelist/nodelist.[0-9][0-9][0-9]