Package Details: 8192cu-dkms v4.0.2_9000-12

Git Clone URL: https://aur.archlinux.org/8192cu-dkms.git (read-only)
Package Base: 8192cu-dkms
Description: Driver for Realtek RTL8188CUS (8188C, 8192C) chipset wireless cards
Upstream URL: http://www.realtek.com.tw/
Licenses: GPL
Conflicts: 8192cu, dkms-8192cu, rt8192cu
Replaces: dkms-8192cu
Submitter: runnytu
Maintainer: runnytu
Last Packager: runnytu
Votes: 88
Popularity: 1.512983
First Submitted: 2014-05-07 21:01
Last Updated: 2017-05-17 19:33

Dependencies (2)

Required by (0)

Sources (3)

Latest Comments

DaVarga commented on 2017-05-18 16:05

Wifi connection on rpi-zero stable now.

runnytu commented on 2017-05-17 19:36

Hello, Bump to new version v4.0.2_9000-12 for kernel 4.11 compatibility.

PhotonX commented on 2017-05-13 19:13

Thanks for the quick fix, I will test asap (it's not on my machine) and report back!

runnytu commented on 2017-05-13 13:37

@PhotonX, This is because USB code 0df6:0077 isn't in the driver source code list of accepted devices, I update de source code to add compatibility with this device, reinstall the package should fix the issue.

PhotonX commented on 2017-05-11 20:20

Trying to use this with a Sitecom WLA-2100 (300M), USB code 0df6:0077. The module builds fine and everything looks good but after a reboot the module is not loaded. "lsmod | grep 8192" and "dmesg | grep 8192" give no output. When plugging off and on the Wifi stick, dmesg reports that it is running with xhci_hcd which is complete rubbish. What could be the reason for the problem? Running kernel 4.9.24.

Caribou123 commented on 2017-04-25 16:58

Hello,
I encounter an issue with my dwa 131 B which use 8192cu driver.
My download rate is 8mbits and upload 0,4mbits i m trying every option with modprobe but doesnt seem to change anything.
Does some one already had this problem ? Is there a parameter that influe on upload rate ?
Thanks^^

kts commented on 2017-03-16 15:55

@runnytu, @kleinph;
Thanks!

Modifying NetworkManager.conf get me to the fullest possible speed and the highest signal strength.

kleinph commented on 2017-03-16 12:36

@runnytu, ups sorry, I must habe overlooked that.

runnytu commented on 2017-03-16 11:50

@kleinph, it was alredy in the comments:

runnytu comentó en 2016-11-01 14:59
The problem with NM 1.4.2 is for a new functionality added in the new version, after upgrade both packages to 1.4.2, you need to add in etc/NetworkManager/NetworkManager.conf at the end of file this:

[device]
wifi.scan-rand-mac-address=no

restart networkmanager service and works ok.

kleinph commented on 2017-03-16 10:31

@francesco_dem:
Are you using NetworkManager? That may be the problem, because it randomizes MAC addresses while scanning for networks. This seems to be not well supported by this driver and it constantly fails and spams the log with such messages:
NetworkManager: <info> device (wlan0): supplicant interface state: disabled -> inactive
NetworkManager: <warn> device (wlan0): set-hw-addr: new MAC address XX:XX:XX:XX:XX:XX not successfully set (scanning)
NetworkManager: <info> device (wlan0): supplicant interface state: inactive -> disabled

I put
[device]
wifi.scan-rand-mac-address=0
in my /etc/NetworkManager/NetworkManager.conf it worked like a charm.

See also https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836351.

@runnytu maybe you could put this info somewhere.

(edit: posted the correct config snippet)

All comments