Arch Linux User Repository

The plugdev group doesn't exist. I suppose it should be created during the package installation, shouldn't it?

You're right, I didn't even think about clearing my cache. Thanks!!

@klanc, are you absolutely sure this is not just a corrupted download? The md5sums come directly from Intel, and I just confirmed that QuartusLiteSetup is correct.

EDIT: Got a corrupted download, ignore this

I̶n̶s̶t̶a̶l̶l̶a̶t̶i̶o̶n̶ ̶c̶u̶r̶r̶e̶n̶t̶l̶y̶ ̶f̶a̶i̶l̶s̶ ̶w̶i̶t̶h̶ ̶Q̶u̶a̶r̶t̶u̶s̶L̶i̶t̶e̶S̶e̶t̶u̶p̶-̶2̶0̶.̶1̶.̶1̶.̶7̶2̶0̶-̶l̶i̶n̶u̶x̶.̶r̶u̶n̶ ̶a̶n̶d̶ ̶M̶o̶d̶e̶l̶S̶i̶m̶S̶e̶t̶u̶p̶-̶2̶0̶.̶1̶.̶1̶.̶7̶2̶0̶-̶l̶i̶n̶u̶x̶.̶r̶u̶n̶ ̶n̶o̶t̶ ̶p̶a̶s̶s̶i̶n̶g̶ ̶v̶a̶l̶i̶d̶i̶t̶y̶ ̶c̶h̶e̶c̶k̶s̶.̶ ̶A̶n̶y̶ ̶i̶d̶e̶a̶s̶?̶

@gwatcha, the latest HLS compiler is only available from the Pro distribution, but says it doesn't require an additional license. I packaged this version. Can you try to see if it works?

@g8sqh, I can't reproduce. Did you run the jtagd in quartus/linux64 by accident? The one in quartus/bin is a shell script that sets up LD_LIBRARY_PATH, among other things. That one runs fine.

You will also need to run as LD_LIBRARY_PATH=/opt/intelFPGA/20.1/quartus/linux64 /opt/intelFPGA/20.1/quartus/linux64/quartus

Otherwise the jtagd doesn't get libboost version 1.59 and some other libraries

In addition, you need libudev-shim installed or jtagd complains:

No USB device change detection because libudev.so.0 not found

How can I install it with the HLS compiler? Is there an option to pass to the QuartusLite setup? Altera says HLS comes with Quartus Lite, but I noticed there's no quartus/hls directory.

I have updated to the 20.1 release, and following wall07's request, I've split the package into the existing components. quartus-free is now a meta-package that will pull all components by default.

Please tell if there is any missing functionality due to this change.

For me default 51-usbblaster.rules didn't work. I had to use

# USB Blaster
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", MODE="0666", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", RUN+="/bin/chmod 0666 %c"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6002", MODE="0666", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", RUN+="/bin/chmod 0666 %c"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6003", MODE="0666", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", RUN+="/bin/chmod 0666 %c"
# USB Blaster II
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6010", MODE="0666", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", RUN+="/bin/chmod 0666 %c"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6810", MODE="0666", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", RUN+="/bin/chmod 0666 %c"

Quartus 19.1 has issues with its perl distribution on Linux. When compiling a QSYS project, I get the following error:

Can't locate Getopt/Long.pm in @INC (you may need to install the Getopt::Long module) (
   @INC contains:
      /opt/altera/19.1/quartus/sopc_builder/bin/europa 
      /opt/altera/19.1/quartus/sopc_builder/bin 
      /opt/altera/19.1/quartus/../ip/altera/sopc_builder_ip/common 
      /opt/altera/19.1/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio 
      /tools/perl/5.28.1/linux64/lib/site_perl/5.28.1/x86_64-linux 
      /tools/perl/5.28.1/linux64/lib/site_perl/5.28.1 
      /tools/perl/5.28.1/linux64/lib/5.28.1/x86_64-linux 
      /tools/perl/5.28.1/linux64/lib/5.28.1
   ) at /opt/altera/19.1/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl line 18.

It seems like the perl distribution points to the wrong directory because the library is located at /opt/altera/19.1/quartus/linux64/perl/lib/5.28.1/Getopt/Long.pm

I've found a bunch references in the perl distribution pointing to the wrong directory ( https://pastebin.com/wfUKcSjq )

A "fix" seems to be to link to the system perl executeable: http://www.armadeus.org/wiki/index.php?title=Quartus_installation_on_Linux#Perl_Getopt::Long

Edit:

I created a post in the Intel forum: https://forums.intel.com/s/question/0D50P00004YMMd4SAH/cant-locate-getoptlongpm-when-generating-a-qsys-project