Package Details: rtl88xxau-aircrack-dkms-git r999.65174c4-1

Git Clone URL: https://aur.archlinux.org/rtl88xxau-aircrack-dkms-git.git (read-only, click to copy)
Package Base: rtl88xxau-aircrack-dkms-git
Description: Aircrack-ng kernel module for Realtek 88XXau (USB adapters only) network cards (8811au, 8812au, 8814au and 8821au chipsets) with monitor mode and injection support
Upstream URL: https://github.com/aircrack-ng/rtl8812au
Keywords: 8811au 8812au 8814au 8821au aircrack dkms driver injection rtl8811au rtl8812au rtl8814au rtl8821au rtl88xx wireless
Licenses: GPL
Conflicts: rtl8812au-aircrack-dkms-git, rtl8812au-dkms-git, rtl8812au-inject-dkms-git, rtl8814au-dkms-git, rtl8821au-dkms-git
Replaces: rtl8812au-aircrack-dkms-git
Submitter: iyanmv
Maintainer: iyanmv
Last Packager: iyanmv
Votes: 28
Popularity: 1.49
First Submitted: 2019-01-29 20:43
Last Updated: 2020-01-10 15:57

Dependencies (2)

Required by (0)

Sources (2)

Pinned Comments

iyanmv commented on 2020-01-10 16:02

This package now forces to use the branch v5.6.4.2 (the one that works better for me), which is the default one in the remote repository although they still mention branch v5.3.4 as the stable one. If you have any issues, please leave a comment, and also tried to change the branch in the source array. For example, change it to:

source=('rtl88xxau::git+https://github.com/aircrack-ng/rtl8812au.git#branch=v5.3.4'

Read the README.me to learn how to set your interface in monitor mode (and other things).

Important: Use ip and iw instead of ifconfig and iwconfig

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 8 9 ... Next › Last »

mokkurkalve commented on 2019-10-14 12:20

My adapter Asus USB-AC56 (rtl8812au) seems to work fine here & now with kernel linux 5.3.5.arch1-1. What is curious is that I had to set Management Frame Protection (802.11w) from "supported" to "disabled" on the AP before I could associate adapter with AP. (And it was set to "supported", not "mandatory".) Anybody understands this? (The AP is Asus RT-AC68U with asuswrt-merlin 384.13 firmware.)

Nudin commented on 2019-10-12 21:18

Used this without problems until to the upgrade to kernel 5.3, after that it didn't got an interface, upgraded to newest version now I do see the interface but still get no scan results. All other drivers don't work as well…

Gatenkaas commented on 2019-10-07 10:25

Driver had some recent updates and works again for me now, thanks. (TP-Link T9UH v1)

iyanmv commented on 2019-10-01 19:41

@mrpanda so probably it's an issue with recent kernels. Have a look at this open issue upstream, subscribe to it just in case someone figure it out, and wwait till they fix it (kernel or driver). I'm sorry but I can't help here, I just maintain the PKGBUILD.

mrpanda commented on 2019-10-01 17:39

@iyanmv Yes it has compatible chipset. My point was that I was using this driver till kernel 5.3.1 update so I was expected to see some error during installation that's it.

iyanmv commented on 2019-10-01 06:43

@mrpanda why should it work this driver for you or any others from AUR? Are you sure your Qoltec uses a compatible chipset? Of course, you will be able to install any of them, but that's not the point, right?

mrpanda commented on 2019-09-30 22:27

none of the drivers in AUR support my Qoltec 57010 hardware rtl8811au no installation problems , but it seems that it has no power , the indicator is dead.

aris commented on 2019-09-30 04:44

@Gatenkaas The driver works for me on kernel 5.3.1, and I'm using TP-Link T9UH. However, this driver is nowhere close to the performance I'd get with the package rtl8814au-dkms-git. The signal strength is about 30% less and the upload speed is at least 80% slower. Sadly, the rtl8814au-dkms-git driver has stopped working after I upgraded to 5.3.1. Otherwise, I wouldn't be using the aircrack driver.

jpegxguy commented on 2019-09-23 16:48

@Gatenkaas File any bug reports (Search before creating a new issue) in the upstream github. They can fix it there. https://github.com/aircrack-ng/rtl8812au

Gatenkaas commented on 2019-09-23 16:04

None of the current drivers in AUR for kernel 5.3 seem to support my tp-link T9UH v1 anymore [8814au]. No building problems at all - but the device has no power (lights). However lsusb shows the device, but modprobe hangs. No problems on kernel 5.2.