Package Details: slic3r-git a-21

Git Clone URL: https://aur.archlinux.org/slic3r-git.git (read-only, click to copy)
Package Base: slic3r-git
Description: Slic3r is an STL-to-GCODE translator for RepRap 3D printers, aiming to be a modern and fast alternative to Skeinforge.
Upstream URL: http://slic3r.org/
Licenses: GPL
Conflicts: slic3r, slic3r-xs, slic3r-xs-git
Provides: slic3r, slic3r-xs, slic3r-xs-git
Submitter: swiftgeek
Maintainer: swiftgeek (nickoe)
Last Packager: swiftgeek
Votes: 20
Popularity: 0.000000
First Submitted: 2012-06-23 10:45 (UTC)
Last Updated: 2022-06-03 17:50 (UTC)

Dependencies (27)

Required by (1)

Sources (3)

Pinned Comments

swiftgeek commented on 2016-04-19 00:37 (UTC) (edited on 2018-11-07 01:46 (UTC) by swiftgeek)

If something breaks on PKGBUILD side, please bother me directly on freenode (usually available at #slic3r) XS compilation requires more than 512MiB of installed RAM, adding same amount of swap makes it build (tested on armv7h, Allwinner A13)

Perl update guide: https://lists.archlinux.org/pipermail/arch-dev-public/2015-June/027236.html

or since 5.26:

pacman -Qqo '/usr/lib/perl5/5.26' where 5.26 is OLD version of perl

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 .. 10 Next › Last »

Hibou commented on 2016-08-29 03:46 (UTC)

Tried reinstalling this program, so far when I try to run with the GUI I receive the following: 09:42:53 PM: Warning: Mismatch between the program and library build versions detected. The library used 3.0 (wchar_t,compiler with C++ ABI 1009,wx containers,compatible with 2.8), and your program used 3.0 (wchar_t,compiler with C++ ABI 1010,wx containers,compatible with 2.8). Can't locate OpenGL.pm in @INC (you may need to install the OpenGL module) (@INC contains: /usr/bin/vendor_perl/lib /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2DToolpaths.pm line 120. BEGIN failed--compilation aborted at /usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2DToolpaths.pm line 120. Compilation failed in require at /usr/share/perl5/vendor_perl/Slic3r/GUI.pm line 16. BEGIN failed--compilation aborted at /usr/share/perl5/vendor_perl/Slic3r/GUI.pm line 16. Compilation failed in require at (eval 64) line 1 I tried installing wx via the package wx-perl and also through cpan using 'cpan -i Wx', but the error persists! I can't get the command line to work (won't take my ini files or verbose inputs), so I was going to try using the GUI.

swiftgeek commented on 2016-04-19 00:37 (UTC) (edited on 2018-11-07 01:46 (UTC) by swiftgeek)

If something breaks on PKGBUILD side, please bother me directly on freenode (usually available at #slic3r) XS compilation requires more than 512MiB of installed RAM, adding same amount of swap makes it build (tested on armv7h, Allwinner A13)

Perl update guide: https://lists.archlinux.org/pipermail/arch-dev-public/2015-June/027236.html

or since 5.26:

pacman -Qqo '/usr/lib/perl5/5.26' where 5.26 is OLD version of perl

pzl commented on 2015-11-30 22:49 (UTC)

heads up to those running off of master: 321b1a9 was the last commit that compiled without changes for me. After that, a big old branch (code written in mid-2014) was merged in commit dbcc41e. It introduced a dependency on Devel::CheckLib so adding perl-devel-checklib to makedepends fixed that. It also made some changes to it's Boost dependency (see upstream announcement here: https://github.com/alexrj/Slic3r/issues/3117 ). So adding 'boost' (which includes dev headers) fixes that. tl;dr to run off master add 'boost' and 'perl-devel-checklib' to makedepends

basil commented on 2015-10-29 18:04 (UTC)

After installing this package, when trying to run slic3r.pl --gui, I get the following error: Warning: Mismatch between the program and library build versions detected. The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1008,wx containers,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1009,wx containers,compatible with 2.6). Base class package "Wx::GLCanvas" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /usr/bin/vendor_perl/lib /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .). at /usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2DToolpaths.pm line 121. BEGIN failed--compilation aborted at /usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2DToolpaths.pm line 121. Compilation failed in require at /usr/share/perl5/vendor_perl/Slic3r/GUI.pm line 16. BEGIN failed--compilation aborted at /usr/share/perl5/vendor_perl/Slic3r/GUI.pm line 16. Compilation failed in require at (eval 66) line 1.

swiftgeek commented on 2015-06-29 09:34 (UTC)

Perl 5.22 state: After patching perl-extutils-cppguess slic3r:xs compiles, and passes both sets of tests As for GUI though, perl-opengl is broken - but if you are brave enough you can just disable check stage of that package

swiftgeek commented on 2015-06-16 21:07 (UTC)

Rebuild reminder and update script for perl 5.22: https://lists.archlinux.org/pipermail/arch-dev-public/2015-June/027236.html

swiftgeek commented on 2015-02-28 07:58 (UTC)

New optdep: perl-net-bonjour for octoprint discovery

swiftgeek commented on 2015-02-11 21:08 (UTC)

Brought back prerequisites checking, just for info for now (|| true)

swiftgeek commented on 2015-01-25 01:28 (UTC)

a-14 shouldn't break $pkgver standards anymore (a-13 produced package with invalid '-' character in $pkgver; i.e 1.2.6-dev . If this happens again pkgver() will fail) I also moved git/dialog stuff to pkgver() and finally disabled that useless message about detached head, so if it fails with with pacaur or similar aur helper - please reach me directly over mail/irc [swiftgeek, #slic3r @freenode] From slic3r related news - please test new plater/gcode 3D previews 1.2.x is going to hit stable soon™