diff options
Diffstat (limited to 'epkowa.conf')
-rw-r--r-- | epkowa.conf | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/epkowa.conf b/epkowa.conf new file mode 100644 index 000000000000..2bdda713de5b --- /dev/null +++ b/epkowa.conf @@ -0,0 +1,65 @@ +# epkowa.conf -- sample configuration for the EPKOWA SANE backend +# Copyright (C) 2004, 2008, 2009 Olaf Meeuwissen +# +# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details. + +# Detect all devices supported by the backend. +# If you don't have a SCSI device, you can comment out the "scsi" +# keyword. Similarly for the other keywords. +# +usb +scsi + + +# For any USB scanner not known to the backend (yet), you may, at your +# own peril(!!), force the backend to recognise and use it via libusb. +# You can do so by the following configuration command: +# +# usb <USB vendor ID> <USB product ID> +# +# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order +# to find the USB product ID, use lsusb(1). +# A sample configuration for the Epson Perfection 1650 (Epson GT-8200), +# which has a product ID of 0x0110, would look as follows: +# +#usb 0x04b8 0x0110 +#usb 0x04b8 0x012d + +# For SCSI devices not detected, you can add an entry like: +# +# scsi EPSON GT-20000 +# +# where the GT-20000 bit corresponds to the SCSI model information as +# shown in the output of dmesg(1) or in the /var/log/kern.log file. + + +# Network attached devices may be made to work by first installing the +# (non-free) iscan-network-nt package and then adding configuration lines +# as per information below. +# +# For each network attached device, you must add an entry as follows: +# +# net <IP-address|hostname> [port-number] +# +# Ask your network administrator for the device's IP address or check +# for yourself on the panel (if it has one). The port-number is very +# optional and defaults to 1865. +# Note that network attached devices are not queried unless configured +# in this file. +# +# Examples: +# +#net 192.16.136.2 1865 +#net 10.0.0.1 +#net scanner.mydomain.com + + +# Some backend behaviour can be customized by using the option keyword +# followed by an option name, as shown below. +# +# option <option-name> +# +# Currently available options: +# +# Makes the automatic document feeder the default document source +#option prefer-adf |