Added epkowa.conf

1 files changed, 65 insertions, 0 deletions

diff --git a/epkowa.conf b/epkowa.conf
new file mode 100644
index 000000000000..2bdda713de5b
--- /dev/null
+++ b/epkowa.conf
@@ -0,0 +1,65 @@
+# epkowa.conf -- sample configuration for the EPKOWA SANE backend
+# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
+#
+# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.
+
+# Detect all devices supported by the backend.
+# If you don't have a SCSI device, you can comment out the "scsi"
+# keyword.  Similarly for the other keywords.
+#
+usb
+scsi
+
+
+# For any USB scanner not known to the backend (yet), you may, at your
+# own peril(!!), force the backend to recognise and use it via libusb.
+# You can do so by the following configuration command:
+# 
+#   usb <USB vendor ID> <USB product ID>
+#
+# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
+# to find the USB product ID, use lsusb(1).
+# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
+# which has a product ID of 0x0110, would look as follows:
+#
+#usb 0x04b8 0x0110
+#usb 0x04b8 0x012d
+
+# For SCSI devices not detected, you can add an entry like:
+#
+#   scsi EPSON GT-20000
+#
+# where the GT-20000 bit corresponds to the SCSI model information as
+# shown in the output of dmesg(1) or in the /var/log/kern.log file.
+
+
+# Network attached devices may be made to work by first installing the
+# (non-free) iscan-network-nt package and then adding configuration lines
+# as per information below.
+#
+# For each network attached device, you must add an entry as follows:
+#
+#   net <IP-address|hostname> [port-number]
+#
+# Ask your network administrator for the device's IP address or check
+# for yourself on the panel (if it has one).  The port-number is very
+# optional and defaults to 1865.
+# Note that network attached devices are not queried unless configured
+# in this file.
+#
+# Examples:
+#
+#net 192.16.136.2 1865
+#net 10.0.0.1
+#net scanner.mydomain.com
+
+
+# Some backend behaviour can be customized by using the option keyword
+# followed by an option name, as shown below.
+#
+#   option <option-name>
+#
+# Currently available options:
+#
+# Makes the automatic document feeder the default document source
+#option prefer-adf