Arch Linux User Repository

PSA: I've started hosting this and also many other packages I maintain in the AUR as prebuilt packages in my repository for those that want to install them using pacman without messing around with building from the AUR.

There does seem to be something anomalous in the swig part, comparing using -j1 and -j2 at least. Perhaps upstream should take a look. I believe -j1 is the best solution here for the time being.

should mention, oddly enough, that my default makepkg.conf contains MAKEFLAGS="-j10"

It seems that I can build also with -j2, -j9 or even -j10 okay (with just the warning but no error).. but seemingly not using the default value.

I'm on an AMD Opteron(tm) Processor 6338P (family: 0x15, model: 0x2, stepping: 0x0)

go figure!

for info, tried simply with

diff --git a/PKGBUILD b/PKGBUILD
index 771ebeb..ea77c33 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -48,7 +48,7 @@ build() {
   make dep
   make

-  make -C pjsip-apps/src/swig
+  make -j1 -C pjsip-apps/src/swig

   cd 'pjsip-apps/src/swig/python'
   python setup.py build

and it built ok.

@risto3,@caleb: build fails when make runs several parallel jobs. Put

MAKEFLAGS="j1"

to makepkg.conf or replace build() function in PKGBUILD with

build() {
  cd "$pkgbase-$pkgver"
  export CXXFLAGS="$CXXFLAGS -fPIC"
  if [ "$CARCH" = "i686" ]; then
    export CXXFLAGS="$CXXFLAGS -march=i686"
    arch_opts=(--disable-libwebrtc)
  fi
  export CFLAGS="$CFLAGS -fPIC -DNDEBUG"
  ./configure \
    --prefix=/usr \
    --with-external-speex \
    --with-external-srtp \
    --with-external-pa \
    --with-external-gsm \
    --enable-shared \
    --disable-opencore-amr \
    "${arch_opts[@]}"

  make -j1 dep
  make -j1
  make -j1 -C pjsip-apps/src/swig
}

@risto3 I'm sorry it's broken for you, but I can't identify the problem. It is giving you an error about a directory not existing ... something that should have been extracted from the source tarball. I just tested on a clean build tree and not only is that directory present, but it builds fine too. You can also try this package. If you figure out what is either missing from your system or you can do differently to build it I'm happy to facilitate a fix.

oups, I'm having difficulties upgrading to 2.10 on

Linux sarchx64 5.4.21-1-lts #1 SMP Thu, 20 Feb 2020 18:23:19 +0000 x86_64 GNU/Linux

Here's the tail end of the build

make[2] : on quitte le répertoire « /tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/build »
make[2] : on quitte le répertoire « /tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/build »
make[1] : on quitte le répertoire « /tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/build »
make : on entre dans le répertoire « /tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig »
make  -C python 
make[1]: Entering directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python'
python3 setup.py build 
make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
running build
running build_py
running build_ext
building '_pjsua2' extension
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -fno-semantic-interposition -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fPIC -DNDEBUG -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.8 -c pjsua2_wrap.cpp -o build/temp.linux-x86_64-3.8/pjsua2_wrap.o make[2]: Entering directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python' -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fPIC -DPJ_AUTOCONF=1 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fPIC -DNDEBUG -DPJ_IS_BIG_ENDIAN=0 -DPJ_IS_LITTLE_ENDIAN=1 -fPIC -DPJMEDIA_VIDEO_DEV_HAS_SDL=1 -I/usr/include/SDL2 -D_REENTRANT -DPJMEDIA_HAS_LIBAVDEVICE=1 -DPJMEDIA_HAS_LIBAVFORMAT=1 -DPJMEDIA_HAS_LIBAVCODEC=1 -DPJMEDIA_HAS_LIBSWSCALE=1 -DPJMEDIA_HAS_LIBAVUTIL=1 -DPJMEDIA_VIDEO_DEV_HAS_V4L2=1 -DPJMEDIA_HAS_VPX_CODEC=1 -DPJMEDIA_VIDEO_DEV_HAS_SDL=1 -I/usr/include/SDL2 -D_REENTRANT -DPJMEDIA_HAS_LIBAVDEVICE=1 -DPJMEDIA_HAS_LIBAVFORMAT=1 -DPJMEDIA_HAS_LIBAVCODEC=1 -DPJMEDIA_HAS_LIBSWSCALE=1 -DPJMEDIA_HAS_LIBAVUTIL=1 -DPJMEDIA_VIDEO_DEV_HAS_V4L2=1 -DPJMEDIA_HAS_VPX_CODEC=1 -I/tmp/makepkg/pjproject/src/pjproject-2.10/pjlib/include -I/tmp/makepkg/pjproject/src/pjproject-2.10/pjlib-util/include -I/tmp/makepkg/pjproject/src/pjproject-2.10/pjnath/include -I/tmp/makepkg/pjproject/src/pjproject-2.10/pjmedia/include -I/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip/include -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fPIC -DNDEBUG make[2]: Leaving directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python'
gcc: error: make[2]: Entering directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python': No such file or directory
gcc: error: make[2]: Leaving directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python': No such file or directory
error: command 'gcc' failed with exit status 1
make[1]:  [Makefile:37: _pjsua2.so] Error 1
make[1]: Leaving directory '/tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig/python'
make:  [Makefile:27 : python] Erreur 2
make : on quitte le répertoire « /tmp/makepkg/pjproject/src/pjproject-2.10/pjsip-apps/src/swig »
==> ERREUR : Une erreur s’est produite dans build().
    Abandon…

PSA: I've started hosting this and also many other packages I maintain in the AUR as prebuilt packages in my repository for those that want to install them using pacman without messing around with building from the AUR.

Here is a modified PKGBUILD that pulls the svn instead to get 'pjsystest' and the corresponding wav files. You have to copy them from /usr/share/pjproject to a writable folder and start 'pjsystest'.

I actually needed that to test latency and list detected audio devices and audio backends.

Latency isn't that good here though (245ms roundtrip) on Audigy2 with Portaudio. I've tried ALSA and JACK as well but i don't get them properly working (JACK partially/scrambled, ALSA doesn't initialize properly). They can be optionally enabled in the PKGBUILD marked as experimental.

JACK would be the low-latency killer feature for SIP apps but there is none supporting it. JACK2-dbus doesn't work with portaudio anymore either.

PKGBUILD: https://pastebin.com/raw/z0RJJTzB

@Maniaxx I'm actually using a local build without these flags as well and it's working fine; it seems they slipped past me when I rebased my patch for submission. Fixed now.

Why are these options disabled? pjsua doesn't find any soundcard with --disable-sound and thus is barely usable. The others don't seem to harm either. Why closing doors here?

--disable-v4l2 \
--disable-video \
--disable-sound \