Package Details: octoprint-venv 1.3.11-1

Git Clone URL: https://aur.archlinux.org/octoprint-venv.git (read-only)
Package Base: octoprint-venv
Description: The snappy snappy web interface for your 3D printer! (virtualenv installation type)
Upstream URL: http://octoprint.org/
Licenses: AGPL3
Conflicts: octoprint
Provides: octoprint
Submitter: Jake
Maintainer: Jake
Last Packager: Jake
Votes: 19
Popularity: 0.884047
First Submitted: 2017-01-15 12:46
Last Updated: 2019-05-27 09:48

Pinned Comments

Jake commented on 2017-10-24 16:03

If the hashsum is incorrect please just flag it out of date (also when there is no real new release, but the changed the old archive for some reason).

Latest Comments

1 2 3 4 5 6 ... Next › Last »

plutonium commented on 2019-09-27 08:02

@ArchGalileu I have a Raspberry Pi cam working on my octoprint install... I just followed guides available on the net, e.g. the alarm wiki https://archlinuxarm.org/wiki/Raspberry_Pi + octoprint information to run mjpg-streamer. The only problem I had with mjpg-streamer is that I did not get the input_raspicam plugin to work, but input_uvc works...

For your access to sudo systemctl reboot and other system commands from octoprint, check that you have a line that allows the octoprint user to run sudo commands without a password, either in /etc/sudoers or a file in /etc/sudoers.d/. Furthermore, on my fresh install the octoprint account was expired and password-locked. You don't have to unlock the password (user should not log-in), but update the account so it does not expire: chage -E -1 octoprint

ArchGalileu commented on 2019-09-16 23:17

Hello

anyone knows howto add the camera to octoprint? The raspberry pi camera?

Also can't solve access to "sudo systemctl restart .... or sudo systemctl reboot"

Best regards ArchGalileu

Jake commented on 2019-08-25 12:15

sl1pkn07: You must run it as the octoprint user, if you want to use plugin installation etc. with the included pip, the permissions get set accordingly (other have only read+execute). I have also included a systemd service that does this automatically, so the simplest way is to just start/enable that.

sl1pkn07 commented on 2019-08-23 16:50

seems pip can't write into /opt/octorpint/lib/pythonXX/site-packages

eimis commented on 2018-08-06 19:13

It takes a long to compile on a raspberry pi 1 even with distcc, so here: http://www.mediafire.com/file/i41s8d4i4cd9cqq/octoprint-venv-1.3.9-1-armv6h.pkg.tar.xz

Jake commented on 2018-07-17 21:14

Yeah, but if you comment that line out you get a effectivly empty package ;) Maybe you had just a short internet disconnect while building the package? I would try a clean build again.

chrissnell commented on 2018-07-17 21:04

I'm having a strange problem with this package. When I run 'makepkg -si', the package build dies while fetching dependencies:

Processing dependencies for OctoPrint==1.3.8
Searching for frozendict<1.3,>=1.2
Reading https://pypi.python.org/simple/frozendict/
Download error on https://pypi.python.org/simple/frozendict/: [Errno -3] Temporary failure in name resolution -- Some packages may not be found!
Couldn't find index page for 'frozendict' (maybe misspelled?)
Scanning index of all packages (this may take a while)
Reading https://pypi.python.org/simple/
Download error on https://pypi.python.org/simple/: [Errno -3] Temporary failure in name resolution -- Some packages may not be found!
No local packages or working download links found for frozendict<1.3,>=1.2
error: Could not find suitable distribution for Requirement.parse('frozendict<1.3,>=1.2')
==> ERROR: A failure occurred in package().
    Aborting...

It was very odd to see a name resolution failure, so I went into the src directory and ran this by hand:

../../pkg/octoprint-venv/opt/octoprint-venv/bin/python2 setup.py install --optimize=1

... and it worked just fine. So, I commented this line out in PKGBUILD:

${pkgdir}/opt/$pkgname/bin/python2" setup.py install --optimize=1

and then ran makepkg -ei and the package was able to build and install.

EDIT: It did install but the octoprint binary is missing. Something is messed up.

Jake commented on 2018-07-11 13:46

Done, thanks tracernz. I am not bumping the pkgrel again, most will soon get it with the 1.3.9 release.

tracernz commented on 2018-07-07 01:44

Thanks for your efforts Jake! A small note, on startup I see the following log message in the journal: Starting the server via "octoprint" is deprecated, please use "octoprint serve" from now on.

Might be a good idea to add the "serve" arg to the service file next time you're working on the package. :)

Jake commented on 2018-06-29 22:14

Sorry for causing the data loss and thanks for the notice, Remspoor. I have changed it (pkgrel=5).