Package Details: opencl-amd 1:6.2.4-1

Git Clone URL: https://aur.archlinux.org/opencl-amd.git (read-only, click to copy)
Package Base: opencl-amd
Description: ROCm components repackaged from AMD's Ubuntu releases (ROCr runtime, ROCm runtime, HIP runtime) - This package is intended to work along with the free amdgpu stack.
Upstream URL: http://www.amd.com
Keywords: amd amdgpu computing gpgpu opencl radeon
Licenses: custom:AMD
Conflicts: amd-smi-lib, comgr, hip, hip-dev, hip-doc, hip-runtime-amd, hip-samples, hipcc, hsa-amd-aqlprofile, hsa-rocr, hsa-rocr-dev, hsakmt-roct, hsakmt-roct-dev, libdrm-amdgpu-amdgpu1, openmp-extras-runtime, rocdecode, rocdecode-dev, rocm-clang-ocl, rocm-cmake, rocm-core, rocm-dbgapi, rocm-debug-agent, rocm-device-libs, rocm-gdb, rocm-hip-runtime, rocm-language-runtime, rocm-ocl-icd, rocm-opencl, rocm-opencl-dev, rocm-opencl-icd-loader, rocm-opencl-runtime, rocm-smi-lib, rocm-utils, rocminfo, rocprofiler, rocprofiler-dev, rocprofiler-plugins, rocprofiler-register, roctracer, roctracer-dev
Provides: amd-smi-lib, comgr, hip, hip-dev, hip-doc, hip-runtime-amd, hip-samples, hipcc, hsa-amd-aqlprofile, hsa-rocr, hsa-rocr-dev, hsakmt-roct, hsakmt-roct-dev, libdrm-amdgpu-amdgpu1, opencl-driver, openmp-extras-runtime, rocdecode, rocdecode-dev, rocm-clang-ocl, rocm-cmake, rocm-core, rocm-dbgapi, rocm-debug-agent, rocm-device-libs, rocm-gdb, rocm-hip-runtime, rocm-language-runtime, rocm-ocl-icd, rocm-opencl, rocm-opencl-dev, rocm-opencl-icd-loader, rocm-opencl-runtime, rocm-smi-lib, rocm-utils, rocminfo, rocprofiler, rocprofiler-dev, rocprofiler-plugins, rocprofiler-register, roctracer, roctracer-dev
Submitter: grmat
Maintainer: sperg512 (luciddream)
Last Packager: luciddream
Votes: 132
Popularity: 0.72
First Submitted: 2016-12-01 03:45 (UTC)
Last Updated: 2024-11-07 20:43 (UTC)

Required by (126)

Sources (38)

Pinned Comments

nho1ix commented on 2023-12-29 08:43 (UTC) (edited on 2024-02-10 07:13 (UTC) by nho1ix)

Note for anyone who has a Polaris GPU (Radeon RX 5xx) debugging issues with this package; Packages that use OpenCL like clinfo or davinci-resolve-studio will need you to downgrade opencl-amd to 1:5.7.1-1 as well as amdgpu-pro-oglp to 23.10_1620044-1 to avoid coredumps & segfaults.

DVR would not open unless these 2 packages were downgraded (along with their dependencies). Had to figure it out the hard way after hours using valgrind and rebooting over and over. Hopefully someone else will not have to pull their hair out trying to resolve their issue.

luciddream commented on 2021-12-26 15:14 (UTC) (edited on 2024-11-07 20:44 (UTC) by luciddream)

Current release is for ROCm 6.2.4 opencl-amd package includes only OpenCL / HIP runtime. You also need to use opencl-amd-dev package for ROCm LLVM compiler, OpenCL and HIP SDK. Please relog / reboot after installing so your PATH gets updated

There are now official packages available: rocm-opencl-sdk for OpenCL and rocm-hip-sdk for HIP - You might have better luck with these packages depending on your GPU.

Latest Comments

« First ‹ Previous 1 .. 72 73 74 75 76 77

grmat commented on 2017-04-20 19:52 (UTC)

@parttimehorse: Thanks for your comment. I see you are using an older GCN card. Now I'm not sure if this card works with the older libdrm, but can you give it a shot and try it with the 16.40 PKGBUILD that Kant provided below? Alternatively, I also pushed it there: https://github.com/grmat/amdgpocl/blob/16.40/PKGBUILD I updated the package again for RX 500 series support. @Kant: With the new cards in mind, I don't think it's a good idea to downgrade the package in general, but it seems that there are in fact problems with older cards. Do you think we should push a 16.40 version under another name to the AUR for convenience?

parttimehorse commented on 2017-04-13 17:19 (UTC)

I hadn't really tried it before, but I do notice that Einstein@Home does not seem to work properly with this package (at least on my system Failed task: https://einsteinathome.org/host/12509020). https://einsteinathome.org/task/632989035 Not sure where the issue is, though (could very well be on their side), but I thought I'd bring it up since I saw you inquiring about the current situation.

grmat commented on 2017-04-07 21:29 (UTC)

Updated to 17.10, thanks for the notice. Seems to work well with Hawaii. Could those who experienced problems update and report?

leidola commented on 2017-04-05 09:17 (UTC)

Just wanted to let you all know, that I've working OpenCL using version 16.60 plus linux-git (currently @ 4.11-rc5). Hardware is: Ryzen + Polaris (R470)

Kant commented on 2017-03-23 02:25 (UTC)

@grmat you can have my built package for 16.40, I found it on my hard drive: https://www.dropbox.com/s/20cbs4m39jsx92o/opencl-amd-16.40.348864-1-x86_64.pkg.tar.gz?dl=0 (I'll upload the .tar.xz for the original AMD files later if you need it, this was faster)

mmstick commented on 2017-02-14 00:05 (UTC) (edited on 2017-02-14 00:06 (UTC) by mmstick)

After extensive debugging why OpenCL kept causing my RX480 8GB to crash the system when ethereum mining with `VM fault: 147`, I have determined that the 16.60 OpenCL driver is basically broken, and the below `fixed` PKGBUILD (from @Kant) of the older 16.40 driver fixes everything. It's also great not having to use the AMDGPU Pro driver.

grmat commented on 2017-02-06 02:53 (UTC) (edited on 2017-02-06 03:53 (UTC) by grmat)

Thanks for the info. But if you like to stay with the old version, that's something different. However, the old url doesn't even work anymore for me. So, I won't "fix" this, obviously. Sorry ;)

Kant commented on 2017-02-05 20:45 (UTC)

I had to fix it because the source doesn't seem to work, here's the fixed PKGBUILD: https://gist.github.com/asdkant/10c1b6570d1547f9d28a1ea4fa185cbe

grmat commented on 2017-02-02 11:25 (UTC) (edited on 2017-02-02 11:27 (UTC) by grmat)

Removed out-of-date flag, as there is no more recent version provided by AMD. Users that are updating from previous versions might need to run `makepkg --cleanbuild`

« First ‹ Previous 1 .. 72 73 74 75 76 77