Package Details: pipewire-jack-git 1.2.0.123.g89bf8b856-1

Git Clone URL: https://aur.archlinux.org/pipewire-git.git (read-only, click to copy)
Package Base: pipewire-git
Description: Low-latency audio/video router and processor (GIT version) - JACK replacement
Upstream URL: https://pipewire.org
Licenses: GPL2, MIT
Conflicts: jack, jack2, pipewire-jack, pipewire-jack-client
Provides: jack, jack2, libjack.so, libjacknet.so, libjackserver.so, pipewire-jack, pipewire-jack-client
Submitter: sl1pkn07
Maintainer: sl1pkn07
Last Packager: sl1pkn07
Votes: 15
Popularity: 0.000661
First Submitted: 2017-09-19 15:57 (UTC)
Last Updated: 2024-08-09 09:31 (UTC)

Required by (822)

Sources (1)

Pinned Comments

Latest Comments

« First ‹ Previous 1 .. 6 7 8 9 10 11 12 13 14 15 16 Next › Last »

tinywrkb commented on 2021-02-18 18:58 (UTC)

@sl1pkn07 another change to the package.

  1. You missed client-rt.conf in the backup array.
  2. Bring back the configs into the main package. I was wrong to assume that users will install the -pulse package when using the Pulse server. This also follows the Rawhide package which PipeWire's developer is its maintainer.

@all you should probably expect two .pacsave files.

diff --git a/PKGBUILD b/PKGBUILD
index 25bb9c3..e329ffe 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -107,8 +107,10 @@ package_pipewire-git() {
             "libpipewire-${pkgver:0:3}.so"
             )
   conflicts=('pipewire')
-  backup=('etc/pipewire/pipewire.conf'
+  backup=('etc/pipewire/client-rt.conf'
           'etc/pipewire/client.conf'
+          'etc/pipewire/jack.conf'
+          'etc/pipewire/pipewire-pulse.conf'
           'etc/pipewire/pipewire.conf'
           'etc/pipewire/media-session.d/alsa-monitor.conf'
           'etc/pipewire/media-session.d/bluez-monitor.conf'
@@ -123,13 +125,11 @@ package_pipewire-git() {

   _pick docs usr/share/doc

-  _pick jack etc/pipewire/jack.conf
   _pick jack etc/pipewire/media-session.d/with-jack
   _pick jack usr/bin/pw-jack usr/lib/pipewire-${pkgver:0:3}/jack
   _pick jack usr/lib/spa-0.2/jack
   _pick jack usr/share/man/man1/pw-jack.1

-  _pick pulse etc/pipewire/pipewire-pulse.conf
   _pick pulse etc/pipewire/media-session.d/with-pulseaudio

   _pick ffmpeg usr/lib/spa-0.2/ffmpeg/libspa-ffmpeg.so
@@ -156,7 +156,6 @@ package_pipewire-jack-git() {
            )
   provides=('pipewire-jack')
   conflicts=('pipewire-jack')
-  backup=('etc/pipewire/jack.conf')

   mv jack/* "${pkgdir}"
 }
@@ -174,7 +173,6 @@ package_pipewire-pulse-git() {
              'pulseaudio'
              'pulseaudio-bluetooth'
              )
-  backup=('etc/pipewire/pipewire-pulse.conf')
   arch=('any')
   install=pipewire-pulse.install

tinywrkb commented on 2021-02-12 11:51 (UTC)

New config files. I'm not 100% sure about moving them to the split packages, especially not pipewire-pulse.conf though it looks like only pulse daemon relevant code uses it, so it might be ok.
Commit message says config paths might change so we should keep an eye on this as it might need another update.

diff --git a/PKGBUILD b/PKGBUILD
index b7a9ba0..0eba889 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -7,7 +7,7 @@ pkgname=('pipewire-git'
          'pipewire-ffmpeg-git'
          'alsa-card-profiles-git'
          )
-pkgver=0.3.21.78.g6b11bf71
+pkgver=0.3.21.86.g8101334b
 pkgrel=1
 pkgdesc='Server and user space API to deal with multimedia pipelines. (GIT version)'
 arch=('x86_64')
@@ -107,7 +107,9 @@ package_pipewire-git() {
             "libpipewire-${pkgver:0:3}.so"
             )
   conflicts=('pipewire')
-  backup=('etc/pipewire/pipewire.conf'
+  backup=('etc/pipewire/client-rt.conf'
+          'etc/pipewire/client.conf'
+          'etc/pipewire/pipewire.conf'
           'etc/pipewire/media-session.d/alsa-monitor.conf'
           'etc/pipewire/media-session.d/bluez-monitor.conf'
           'etc/pipewire/media-session.d/media-session.conf'
@@ -121,11 +123,13 @@ package_pipewire-git() {

   _pick docs usr/share/doc

+  _pick jack etc/pipewire/jack.conf
   _pick jack etc/pipewire/media-session.d/with-jack
   _pick jack usr/bin/pw-jack usr/lib/pipewire-${pkgver:0:3}/jack
   _pick jack usr/lib/spa-0.2/jack
   _pick jack usr/share/man/man1/pw-jack.1

+  _pick pulse etc/pipewire/pipewire-pulse.conf
   _pick pulse etc/pipewire/media-session.d/with-pulseaudio

   _pick ffmpeg usr/lib/spa-0.2/ffmpeg/libspa-ffmpeg.so
@@ -152,6 +156,7 @@ package_pipewire-jack-git() {
            )
   provides=('pipewire-jack')
   conflicts=('pipewire-jack')
+  backup=('etc/pipewire/jack.conf')

   mv jack/* "${pkgdir}"
 }
@@ -169,6 +174,7 @@ package_pipewire-pulse-git() {
              'pulseaudio'
              'pulseaudio-bluetooth'
              )
+  backup=('etc/pipewire/pipewire-pulse.conf')
   arch=('any')
   install=pipewire-pulse.install

tinywrkb commented on 2021-02-11 11:23 (UTC)

@sl1pkn07 here's another update for the PKGBUILD:
1. Drop the Vulkan dependencies as it's now disabled by default and not useful.
2. Sync with extra/pipewire changes. 3. Cosmetics.

diff --git a/PKGBUILD b/PKGBUILD
index ef8dcc4..4438c13 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -7,7 +7,7 @@ pkgname=('pipewire-git'
          'pipewire-ffmpeg-git'
          'alsa-card-profiles-git'
          )
-pkgver=0.3.20.9.g73896bfa
+pkgver=0.3.21.75.g21040043
 pkgrel=1
 pkgdesc='Server and user space API to deal with multimedia pipelines. (GIT version)'
 arch=('x86_64')
@@ -24,13 +24,11 @@ makedepends=('git'
              'jack2'
              'sbc'
              'rtkit'
-             'vulkan-icd-loader'
              'dbus'
              'sdl2'
              'ncurses'
              'libsndfile'
              'bluez-libs'
-             'vulkan-headers'
              'ffmpeg'
              'libldac'
              'libopenaptx'
@@ -88,7 +86,6 @@ package_pipewire-git() {
            'bluez-libs'
            'rtkit'
            'sbc'
-           'vulkan-icd-loader'
            'libasound.so'
            'libdbus-1.so'
            'libfdk-aac.so'
@@ -122,9 +119,6 @@ package_pipewire-git() {

   cd "${pkgdir}"

-  mkdir -p etc/alsa/conf.d
-  ln -st etc/alsa/conf.d /usr/share/alsa/alsa.conf.d/50-pipewire.conf
-
   _pick docs usr/share/doc

   _pick jack etc/pipewire/media-session.d/with-jack
@@ -190,9 +184,10 @@ package_pipewire-alsa-git() {
   conflicts=('pipewire-alsa')
   arch=('any')

-  mkdir -p "$pkgdir"/etc/{alsa/conf.d,pipewire/media-session.d}
-  ln -st "${pkgdir}/etc/alsa/conf.d" /usr/share/alsa/alsa.conf.d/99-pipewire-default.conf
-  touch "$pkgdir/etc/pipewire/media-session.d/with-alsa"
+  mkdir -p "${pkgdir}"/etc/{alsa/conf.d,pipewire/media-session.d}
+  ln -st "${pkgdir}/etc/alsa/conf.d" \
+    /usr/share/alsa/alsa.conf.d/{50-pipewire,99-pipewire-default}.conf
+  touch "${pkgdir}/etc/pipewire/media-session.d/with-alsa"
 }

 package_alsa-card-profiles-git() {
@@ -200,7 +195,7 @@ package_alsa-card-profiles-git() {
   provides=('alsa-card-profiles')
   conflicts=('alsa-card-profiles')

-  mv acp/* "$pkgdir"
+  mv acp/* "${pkgdir}"
 }

 package_pipewire-ffmpeg-git() {

p.s. There are fewer reasons for me to stay on the git package. The only things I'm looking forward are to are: BT HW/device volume sync, auto HFP/HSP profile switch (voice call mode), and a few bug fixes.
So I might not stay on top of changes in the future.

tinywrkb commented on 2021-01-31 16:56 (UTC) (edited on 2021-02-01 13:10 (UTC) by tinywrkb)

I'm not exactly sure when this was added but now PipeWire is can save & restore the volume level of Bluetooth headphones, and it's not defaulting to 100% anymore when there's no saved state.
Also, when you connect a BT device it auto set the default sink and move all playing audio streams (at least those that were not manually set) to the A2DP output sink of the BT device.
So if you used my systemd user udev rule, which I noticed a couple of users did, then you don't need it anymore.

tinywrkb commented on 2021-01-21 11:42 (UTC)

@sl1pkn07 More changes from extra/pipewire.
Now alsa-card-profile is being packaged/split-up from pipewire base package and not pulseaudio, and the latter is packaged with the card profiles.
Because pulseaudio doesn't depend anymore on alsa-card-profile, I think it safe and correct to have pipewire-git directly depend on alsa-card-profile-git.

diff --git a/PKGBUILD b/PKGBUILD
index e0831d8..2009b13 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -5,6 +5,7 @@ pkgname=('pipewire-git'
          'pipewire-alsa-git'
          'pipewire-pulse-git'
          'pipewire-ffmpeg-git'
+         'alsa-card-profiles-git'
          )
 pkgver=0.3.19.61.gfee0c267
 pkgrel=1
@@ -35,6 +36,7 @@ makedepends=('git'
              'libopenaptx'
              'libfdk-aac'
              )
+checkdepends=(desktop-file-utils)
 source=('git+https://gitlab.freedesktop.org/pipewire/pipewire.git')
 sha256sums=('SKIP')

@@ -82,7 +84,7 @@ _pick() {
 }

 package_pipewire-git() {
-  depends=('alsa-card-profiles'
+  depends=('alsa-card-profiles-git'
            'bluez-libs'
            'rtkit'
            'sbc'
@@ -134,9 +136,8 @@ package_pipewire-git() {

   _pick ffmpeg usr/lib/spa-0.2/ffmpeg/libspa-ffmpeg.so

-  # Use alsa-card-profiles built with Pulseaudio
-  rm -rv "$pkgdir"/usr/share/alsa-card-profile
-
+  _pick acp usr/lib/udev
+  _pick acp usr/share/alsa-card-profile
 }

 package_pipewire-docs-git() {
@@ -193,6 +194,14 @@ package_pipewire-alsa-git() {
   touch "$pkgdir/etc/pipewire/media-session.d/with-alsa"
 }

+package_alsa-card-profiles-git() {
+  pkgdesc="ALSA card profiles shared by PipeWire (GIT version)"
+  provides=('alsa-card-profiles')
+  conflicts=('alsa-card-profiles')
+
+  mv acp/* "$pkgdir"
+}
+
 package_pipewire-ffmpeg-git() {
   pkgdesc='Server and user space API to deal with multimedia pipelines. (FFmpeg SPA plugin)(GIT version)'
   depends=('pipewire'

tinywrkb commented on 2021-01-13 16:56 (UTC)

New config files

diff --git a/PKGBUILD b/PKGBUILD
index c4fcb1d..0f4fdc4 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -112,7 +112,9 @@ package_pipewire-git() {
   conflicts=('pipewire')
   backup=('etc/pipewire/pipewire.conf'
           'etc/pipewire/media-session.d/alsa-monitor.conf'
+          'etc/pipewire/media-session.d/bluez-monitor.conf'
           'etc/pipewire/media-session.d/media-session.conf'
+          'etc/pipewire/media-session.d/v4l2-monitor.conf'
           )
   install=pipewire-git.install

eh5 commented on 2021-01-10 09:08 (UTC) (edited on 2021-02-19 02:29 (UTC) by eh5)

Consider using https://aur.archlinux.org/pkgbase/pipewire-common-git/ if you are looking for GStreamer support.

65a commented on 2021-01-09 08:23 (UTC)

Having weird issues with this package vs the default version, and I'm not sure I trust the maintainer. Going back to default package until this namesquat is sorted.

tinywrkb commented on 2020-12-31 17:25 (UTC)

This makes the PKGBUILD a little more similar to extra/pipewire's one https://gist.github.com/tinywrkb/357c3a1a6d18e4219bb211b2a8d3de3f

tinywrkb commented on 2020-12-30 19:51 (UTC)

Note for users, you don't need to enable bluez5 in /etc/pipewire.conf anymore, it just works if you have the pipewire-pulse-git package installed because of the new config files.
In fact, the media-session -e option was removed completely, so I suggest to delete pipewire.conf and have the package deploy the default one when you upgrade.

To the maintainer, new config files in /etc that need to be backed up.

diff --git a/PKGBUILD b/PKGBUILD
index 7efd87a..66b7d77 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -104,7 +104,9 @@ package_pipewire-git() {
             "libpipewire-${pkgver:0:3}.so"
             )
   conflicts=('pipewire')
-  backup=('etc/pipewire/pipewire.conf')
+  backup=('etc/pipewire/pipewire.conf'
+          'etc/pipewire/media-session.d/alsa-monitor.conf'
+          'etc/pipewire/media-session.d/media-session.conf')
   install=pipewire-git.install

   DESTDIR="${pkgdir}" meson install -C build

« First ‹ Previous 1 .. 6 7 8 9 10 11 12 13 14 15 16 Next › Last »